Semi-automatic band saw, mitre R/L
Bomar ergonomic 340.278 DGH

Name: Bomar ergonomic 340.278 DGH
Brand: Bomar
Availability: InStock

Condition

New

Location

Werdau

Semi-automatic band saw, mitre R/L Bomar ergonomic 340.278 DGH

Show map

Machine data

Machine type:: Semi-automatic band saw, mitre R/L

Manufacturer:: Bomar

Model:: ergonomic 340.278 DGH

Condition:: new

Price & Location

Location:: Sorge 54, 08412 Werdau, Deutschland

Call

Details about the offer

Listing ID:: A3912381

Update:: 03.12.2024

Description

Semi-automatic metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°)

Basic equipment:
- Large rotatable support table without wear! (The cutting channel of the saw band rotates with the mitre)
- band tension indicator
- hydraulic control of the cast iron saw arm
- hydraulic clamping of the workpiece via short stroke cylinder
- Height limitation of the saw frame by means of potentiometer from the control panel
- hydraulic cutting pressure regulation (solid material - pipe)
- Lowering of the saw arm via hydraulic cylinder; stepless adjustment
- Lifting of the saw arm manually after the cut
- easy manual shifting of the vice R/L
- electrical band tension control with saw band breakage control
- coolant pump with double feed to the saw band guides
- carbide saw band guides and guide rollers
- Bi - metal saw band M 42
- chip brush
Kdsdpfxed Dpz Sj Adwog
Technical Data
● Cutting range:
round flat square
90° 278 340 x 275 275
45° R 260 320 x 255 230
30° R 155 145 x 115 115
45° L 205 145 x 275 180
Drive power: 1.5KW//400V//50 Hz
Belt speed: 20-120 m/min infinitely variable
Saw band dimension: 3125 x 27 x 0.9 mm
Remaining piece length: 20 mm
Smallest ø: 5 mm
Material support height: 775 mm
Dimension: 1700 x 1500 x 2100 mm
Weight: 410 kg

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2010

36 listings online

Call

Send inquiry

Telephone & Fax

+49 3761 ... show

Fax:

These listings may also fit your interest.

Listing

Tapping Machine DUMETA D-BD-M16 / 180-2000

Velen

7,007 km

Tapping Machine
DUMETAD-BD-M16 / 180-2000

Call

Condition: new, thread dia. M3 - M16 mm max. 187 U/min. working area 180 - 2000 mm engine output 0,7 kW Kdedsfg U Sqspfx Adweg Electric tapping machines for M3 - M16 thread, Angle adjustable. 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. optional: Clamping table with T-slots: 990x700x800mm. Magnetic base. Also available: M14 to M24 and M27 to M33.

See details

Listing

Reiden

6,932 km

Fmb
FMBCalipso

Call

Listing

Cold Circular Sawing - Automatic MEP TIGER 352 NC 5.0

Remseck am Neckar

6,836 km

Cold Circular Sawing - Automatic
MEPTIGER 352 NC 5.0

Call

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces Kdodpfxjfg Rlce Adwjg program.

See details

Listing

Bandsaw - Horizontal BERG & SCHMID K-tech DG 50/33 HA-I

Germany

6,760 km

Bandsaw - Horizontal
BERG & SCHMIDK-tech DG 50/33 HA-I

Call

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm Kedpfx Aefg E Hlodwedg total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I 2-column miter saw Solid, yet easy to use Material height sensor (automatic cut start detection) Smooth running thanks to bevel cut, feed controller + cutting pressure controller Massive material infeed roller Removable chip tray (disinfection) Energy-saving and low-vibration thanks to bevel cut Ergonomic, safe and free-standing control panel Frequency-controlled saw drive 15 -100 m/min. Hydraulic cutting pressure control valve Hydraulic control of saw frame and vice LEDs for monitoring all safety functions Large dimensioned wheels (520 mm) a. Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

See details

Listing

Cold Circular Saw BERG & SCHMID Record 315/350 S

Velen

7,005 km

Cold Circular Saw
BERG & SCHMIDRecord 315/350 S

Call

Condition: new, saw blade diameter 315/350 mm capacity 90 degrees: round 125 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 160x90 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 90 mm capacity 60 degrees: flat 80x100 mm total power requirement 1,8/2,5 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,6 x 1,22 x 1,06 m The large workshop saw with sophisticated technology. (20070) • For miter cuts right and left up to 45°, end stop at 90° and at 45° left • For sawing steel, stainless steel, and, to a limited extent, aluminum profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Conical safety clutch made of hardened steel to protect the saw blades. • Large base plate made of solid cast iron for maximum stability and low-vibration sawing • 2 speeds: 30 + 60 rpm • Powerful special gear with elastic clutch for heavy-duty use • Automatic cooling directly on the saw blade Kdsded Iin Tjpfx Adwsg • Saw head with double bearings • 24 V safety switch in the handle with restart lock • Length stop, assembly tool ATTENTION: Price does not include saw blade!!!

See details

Listing

Mikkeli

6,037 km

Debarker
Valon Kone820

Call

Condition: reconditioned (used), functionality: fully functional, The VK820 single-rotor machine is equipped with an 800 mm rotor and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Alternatively, according to a client's needs, the rotor can be changed to another one (480/620). Kdodpfowfdi Hjx Adwjg

See details

Listing

Mitre cold circular saw automatic, circular saw automatic, production saw KALTENBACH KKS 400 NA

Hessisch Lichtenau

6,811 km

Mitre cold circular saw automatic, circular saw automatic, production saw
KALTENBACHKKS 400 NA

€4,000

fixed price plus VAT

Call

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz Kjded N H A Nopfx Adwsdg - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

See details

Listing

Primultini band saw with mm flywheels. 1000 Primultini

Udine

6,529 km

Primultini band saw with mm flywheels. 1000
Primultini

Call

Listing

Root

6,901 km

CNC lathe
DAEWOOPUMA 230 B

Call

Listing

Mierlo

7,096 km

Bandsaw machine
RogiCY355 INVERTER

Call

Condition: new, ROGI SAW MACHINE TYPE CY355 INVERTER VARIO SPEED Kodpsga Tzxjfx Adwodg SEMI-AUTOMATIC Sawing dimensions ----- 3770 x 34 x 1.1 mm Cutting speeds ----- variable 20-80 M/min. Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting capacity 90 ----- 355 mm / 490 x 300 mm Cutting capacity 60 ----- 230 mm / 180 x 220 mm Cutting capacity 45 ----- 350 mm / 290 x 340 mm Cutting capacity -45 ----- 290 mm / 250 x 250 mm INCLUDED Saw band Workpiece stop Pedestal Pressure gauge for sawbelt tension Saw band guide with carbide inserts Hydraulic quick-clamp Cooling pump Hydraulic bag cylinder Motor protection switch Automatic end stop

See details

Advertise here