Mechanical Decoilers | 750-4000 kg

BOSPORAS MACHINERY | AYIKA MD-Series

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Fedpfx Adoif Sg Sorjgf Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: new, 150000 kg length 12000 mm width 5000 mm height 1400 mm lenkbar lenkbar size of tyres 645 x 250 mm dimensions 14,4 x 5,0 x 1,4 m Heavy duty trailer with - Double steering - small turning circle - very robust, therefore low maintenance Fedpfoftd Udex Adrogf - Reversible drawbar - 50mm impregnated wooden support. (Picture is with steel pad) - Standard paint changes. On request in their Ral color. Chassis: 16 wheels 22x12x16 on 8 axles and 4 rockers Would you like other loads and dimensions? Please contact us.

Condition: used, functionality: fully functional, EUROMAC MULTI 220/6R NOTCHING MACHINE Maximum cutting length 220 mm Maximum sheet thickness 6 mm Variable cutting angle 30 - 120 WITH PUNCHING MACHINE EUROMAC Multi 220/6R 2-station notching and bending machine Press brake, press brake, cutting machine Cutting capacity steel from 6 mm to 45 kg/mm2 Becu Akmemck Ryo Iswn 4 mm for stainless steel Station I (notching) Notching angle from 60° to 140° (with special knives from 30° to 140°) Knife length 220 mm Table dimensions 950 x 640 - manual angle adjustment by handwheels - Notching angle with built-in knife set from 60° to 140° - hydraulic knife locking upper and lower - automatic cutting gap adjustment - Blank holder - Measuring tapes built into the table - Stop guides with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 tons Table dimensions 950 x 340 Working height 1100 mm - Regular lifting speed - Continuously adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4 prisms 90°, length = 415 mm - Upper tool 90°, length = 415 mm Motor power 4kW Mains connection 400 volts, 50 Hz OVERALL DIMENSIONS 115X100X125 WEIGHT: 900 KG Fsdpfxswqdfxo Adrjgf

Condition: used, Year of construction: 1980, functionality: fully functional, Kohler straightening machine 30-400 - built in 1980 Number of straightening rollers 9 Max. belt width 400 mm GSW decoiler AHM 1500 - built in 1999 Fgodsv Hrltjpfx Adref Mounted together on a base frame Further data and pictures on request

Year of construction: 1997, condition: used, machine/vehicle number: 540897, pipe diameter max. 1,500 mm tool diameter max. 200 mm feed rate 40 mm / min sawing of pipes in steel and greycast  iron with wall thickness of up to 22 mm milling of pipes in steel and grey cast iron with wall thickness of up to 15 mm Fgodpfx Ajd Srdxodref cutting speed 35 m / min compressed air requirement 6 bar - 2m³ / min weight approx. 90 kg  

Condition: used, Year of construction: 1994, Straightening roller diameter 18 mm Number of straightening rollers 19 pieces max. strip width 260 mm Coil weight max. 2,000 kg / side further data and pictures on request used, as-is ex stock Fgsdpform Nk Ijx Adrsf on request with overhaul, delivery time by arrangement

Condition: good (used), Year of construction: 2019, functionality: fully functional, EMAE-85/600 Servo feeding and straightening line with LARA D-3000/1600-MH decoiler: Hydraulic coil loading table for Lara D-3000/1600MH decoiler Max. width: 600mm Fedovmmucspfx Adrsgf Max-Min thickness: 0.8 – 4mm Positioning accuracy: +/-0.05mm Max. Diameter: 1600mm Max. Weight: 3000kg Connection to press CamPositioner_HBPS DieTronic coil lubricator width 500 mm Renewed safety logic and mesh fences 8/2020 CE approved

Condition: used, Year of construction: 1996, sheet width 360 mm coil weight 550 kg Fgjdpfx Adeymp Rdorjf coil internal dia. 420 - 520 mm coil external diameter 1600 mm total power requirement 2,2 kW weight of the machine ca. 2 t

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 10900 € 209.28 € 1250 kg 1300 mm 450 - 550 mm 400 mm Fsdewv H Awepfx Adrogf 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control with pneumatic downholer Alternatives (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Feeder/Uncoiler/Straightener LARA DEMAE-10000/100/1400-D – Year 2018 Inspected and ready for production. Complete coil feeding system integrating uncoiling, straightening, and servo-driven feeding in a single compact unit. Engineered for continuous operation in cut-to-length, stamping, or deep-drawing lines, offering high precision and reliability. Robust equipment, ideal for processing carbon steel, stainless steel, and aluminum. Main Components • Powered hydraulic decoiler  Capable of handling heavy coils  Motorized coil loading car for rapid coil changeovers  Loop control via laser sensor  Protected loading area with safety barriers, ensuring excellent process visibility • Combined straightener-feeder  Head equipped with 11 straightening and feed rollers  AC servomotor with PLC control + touch HMI  Automatic threading and de-clamping functions to facilitate strip insertion • Integrated electrical and hydraulic systems  Independent electrical cabinet  Precise advancement control and synchronization with downstream equipment Key Technical Data Fgedpfx Adoy Edfzeref  Maximum strip width: 1,400 mm  Sheet thickness: up to 3 mm (carbon steel / aluminum) up to 1.5 mm (stainless steel)  Power supply: 400 V / 50 Hz  Hydraulic pressure: up to 130 bar