Used Punch presses with 0-35t punching force for sale (144)

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 1,000 h, machine/vehicle number: GRM80E, control type: CNC control, degree of automation: automatic, actuation type: mechanical, controller manufacturer: Otto Bihler, controller model: Otto Bihler, punching force: 30 t, stroke rate (min.): 99 1/min, stroke rate (max.): 120 1/min, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, overall weight: 1,500 kg, Equipment: centralized greasing system, emergency stop, We Sanjit Moulds Private Limited have a Bihler Machine GRM80E. Its a wonderful machine with Multiple Slides. We have maintained the machine properly. The price mentioned is CIF Hamburg. This machine is located in India in Nashik which is very 180 Kms from Mumbai. Lrsdpfjxc Txcex Aa Ieu

Condition: used, Year of construction: 1995, Specification: Model: Indumasch Year of manufacture: 1995 For metal up to: 6 mm Other: foot pedal, interchangeable dies Ledpfx Aaewql S Ho Ioru If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2000, pressure 16 t throat 350 mm stroke 25 mm no. of strokes 200 - 1000 /min distance table/ram, max. stroke up, adjustment up 230 mm table surface area 480 x 280 mm Table height above floor 1050 mm ram surface 200 x 110 mm ram adjustment 25 mm diameter of blanks - 1800 mm no. of flutes 16 - 460 material thickness 2,0 mm distance between mid parts spindle and mid ram 160 - 680 mm power requirement 6,0 kW Ljdpfx Ajw U Ekvea Ijru Weight 5,60 t dimensions of the machine (WxDxH) 1,4 x 2,9 x 2,4 m year of manufacture 1971 - new control 2000 with infinitely variable AC-drive, pneumatic clutch (Ortlinghaus), manual ram adjustment, electro-pneumatic blank clamping, automatic stripping device, intermittent control (ram lifting for idle stroke), fully automated centralized oil lubrication, two-hand operation, electrical control Siemens S 7 (yom 2000) various change wheels

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Ledpfow Tri Nex Aa Ijru Exact details can be found in the PDF.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 48,177 h, General Data Measurements width 6650 mm Measurements depth 2700 mm Measurements height 2980 mm Machine weight 15000 kg Control Unit Brand FAGOR Model 8070 Main Drive Punching force 300 kN Number of axis 4 Movement X-Axis Movement 1600 mm Y-Axis Movement 1250 mm Turret Number of tool slots 4 Tools Number of station 27 Max Material Thickness Steel 0.5–5 mm Media Lrjdpfxexqta Ao Aa Iou Main electronic connection 400 V / 50 Hz Power consumption 25 kVA This 4-axis DANOBAT P1317 turret punch press was manufactured in 2004. It features a punching force of 300 kN, a maximum sheet thickness of 5 mm, and can perform up to 750 strokes per minute. The machine includes a Fagor 8070 CNC control, 27 turret stations, and 4 auto-index stations. Dimensions are 2,700 × 6,650 × 2,980 mm, and it weighs approximately 15,000 kg. Consider the opportunity to buy this DANOBAT P1317 turret punch press. Contact us for more information. Application Types Punching

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Lrodpfx Asxld R Iea Isu Type CX 1000 30 Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Lrodpfxexf Utaj Aa Iou Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: used, total length: 1,900 mm, total width: 950 mm, total height: 1,800 mm, Empty weight: 2.150 kg Price: On request - Maximum capacity (⌀ x thickness): 28 mm x 20 mm - Strokes per minute (at 20 mm stroke): 38 - Working height: 890 mm - Largest hole (optional): 38 mm - Max. bar bending: 250 x 12 mm - Max. sheet bending: 500 x 3 mm - Max. angle cutting (90°): 130 x 13 mm - Max. angle cutting (45°): 70 x 10 mm - Notching (material thickness): 10 mm - Documentation available: No - CE marking present: Yes - Control: Teach-in - Motor power: 7.5kW - Table width: 350mm - Throat depth: 355mm - Table length: 600mm - Ram length: 40mm - Model: Hydraulic - Max. stroke: 55mm - Power: 80.0ton - Transport dimensions: 1900mm x 950mm x 1800mm (l x w x h) - Transport weight [kg]: 2150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lrsdsxhcfpopfx Aa Ieu Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Technical details: punching cross section in mm²: 45 kp/mm² table-size: 120x100 mm throat: 80 mm weight of the machine ca.: 15 kg space requirements of the machine approx.: 0,3x0,2x0,95 m Lrjdpfx Aaou Icw Hs Ieu Punching Press *

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Lredpfx Aaew Trkgo Ieu Exact details can be found in the PDF.

Condition: new, neu 090142 prompt, Zwischenverkauf v Lredpfx Aowirmbea Ieu Polen 7950 € 153.44 € 1 47 to 110 mm 27 mm 25x18 mm 8 s 16 mm 700 bar 479 mm 135 mm 388 mm 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,-

Condition: used, Year of construction: 2001, Combined punching machine with shear and automatic loading/unloading system – FINN-POWER SG + TRS6FB _____ Brand: FINN-POWER Model: SG + TRS6FB Year of manufacture: 2001 Machine weight: 22,000 kg Punching force: 300 kN Shearing force: 250 kN Max. working pressure: 300 bar Ljdpfxow Iflmj Aa Ijru Description: CNC combination punching machine + corner shear, complete with: • automatic loading system with sheet metal storage • CNC rotary turret • integrated corner shear • conveyor belts for unloading • soundproof cabin and safety guards • dedicated Finn-Power CNC The machine is currently installed and can be inspected by appointment. Condition: • Immediately available 📍 Location: Italy _____

Condition: used, TÜNKERS Pneumatic Punching Unit Pneumatic punching yoke, punching press, punching unit Year of manufacture: 2019 Model No.: 141-1040F Yoke No.: B-13-26/100 Pressing force: 4 tons (40 kN at 8 bar) Air connection: max. 8 bar Throat depth: 100 mm Yoke width: 60 mm Hole diameter: Ø 2-13 mm Hole diameter (installed punch): Ø 4 mm Die diameter (outer): Ø 22 mm Ledpfx Aoxf Uqxsa Ijru - Stripper via Vulkollan polyurethane elastomer Dimensions (L x W x H): 280 x 110 x 480 mm Weight: 36 kg Very good condition

Condition: used, Punching force: 300 kN Ljdpoxcndyjfx Aa Ioru For example, punch a 20 mm hole in 12 mm steel Stroke triggering via foot switch Assortment of tools is included in the price

Condition: used, Year of construction: 2000, pressure 8 t throat 350 mm stroke 9,5 mm no. of strokes 180 - 1300 /min Ljdpevuupdefx Aa Isru distance table/ram, max. stroke up, adjustment up 214 mm table surface area 400 x 220 mm Table height above floor 980 mm ram surface 190 x 170 mm ram adjustment 25 mm diameter of blanks 900 mm no. of flutes 1 - 999 material thickness 2,0 mm distance between mid parts spindle and mid ram 35/65 - 450 mm lift stroke 42 mm punch stroke 3 mm power requirement 40,0 kW Weight 6,1 t dimensions of the machine (WxDxH) 2,6 x 1,3 x 2,2 m with infinitely variable drive, pneumatic clutch-brake combination (make Ortlinghaus), manual ram adjustment, pneumatic blank clamping, intermittent control II, ram lifting device for lift stroke, automatic stripping device, circular oil lubrication, noise enclosure with movable safety guard, Notchmaster control with process visualization via screen/display slide conveyor (make Neuhäuser, type 2.090-0, yom 1996) Distance between mid parts spindle and mid ram approx. 35/65 - 450 mm lift stroke approx. 42 mm punch stroke approx. 3 mm

Condition: new, tube diameter 1/4" max. 2" Zoll wall strength max. 3,0 mm engine 400Volt / 1,5KW weight 90 kg dimensions 07 x 0,4 x 0,3 m Pipe notcher Maximum wall thickness 3.0 mm Ljdpfx Aajv Skzke Ijru Suitable for the following pipes: 1/4", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"

Condition: used, Year of construction: 1979, Motorized high-performance hole punch MUBEA KL 30 Punching capacity 30 t Hole diameter, steel 45 30 in 8 mm Lodpfx Aaov N Hrts Ioru or 20 in 12 mm Throat 210 mm Machine dimensions L x W x H approx. 800 x 600 x 1400 mm Weight 330 kg • Mechanical foot release via cable pull • Hand finder • Adjustable hold-down device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, punching pressure 28.0 t punching cross-cut in cmm 31 in 7.0 mm ST Lredpfx Aow U U S Nsa Isu throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: used, Punching Bracket, Punching Unit SUPRA-CLAP Type C12.300 Throat Depth: 300 mm Punching Capacity: 0.3 to 2 mm material thickness, depending on cutting clearance Lrjdpoxbh Rdjfx Aa Isu Hole Diameter: Ø 2 to Ø 12 mm Distance between lower die and punch holder: 8.5 mm Distance between upper and lower bracket: 13 mm Punch Shank Diameter: Ø 12 mm Cutting Plate Outer Diameter: Ø 30 mm Cutting Plate Thickness: 12 mm Drop-through Opening in Punching Bracket: 14.5 mm Installation Height: approx. 145 mm - Standard punch length 70 mm with 60° head (Punch per DIN 9861 Form C) - Punch holder with spring stripper and return spring - Mounting slot 50 x 13.5 mm and 8 mm locating pin Punching Bracket Dimensions (L x W x H): 390 x 36 x 145 mm Weight: 4 kg Good condition 9 units available, price per unit 3 units with tool inserts (punch + die) 6 units without tool inserts (without punch + without die)

Condition: used, Punching force: 350 kN For example, punch a 23 mm hole in 12 mm steel Stroke triggering via foot switch Lrodpfsxcnccex Aa Iou Support table with folding cams Assortment of tools is included in the price

Year of construction: 2007, condition: good (used), MAKE - LVD, Made in USA/BELGIUM MODEL - GLOBAL 20 1225 YEAR - 2007 CONTROL - FANUC 180I - PB CAPACITY - 20 Tons THROAT DEPTH - 1250.0 mm SHEET SIZE MAX. - 2500.0 x 1250.0 mm (1250.0 x 5000.0 mm) MAXIMUM WORK PIECE WEIGHT - 150 Kg MAXIMUM MATERIAL THICKNESS - 6.0 mm MAXIMUM TABLE SPEED - 0 – 4330.0 TURRET - 30 STATIONS, 4 AUTO-INDEXING MAXIMUM PUNCHING DIAMETER - 89.0 mm PUNCHING SPEED - 350 STROKES/MIN NIBBLING SPEED - 900 STROKES/MIN PRESS MOTOR POWER RATING - 460V 3 Phase Motor DIMENSIONS - 5560.0 x 5560.0 x 2400.0 mm WEIGHT - 16,000 Kg PLUS Ledpfx Aoiab Epoa Ijru BRUSH TABLE VERY LOW HOURS GOOD RANGE OF TOOLING

Condition: used, pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Lrsdpsxaaipofx Aa Isu Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: used, Punching bracket, punching unit SUPRA-CLAP / CEWE Type PAE 50 - 400 3GN 3P1 Throat depth: 400 mm Punching capacity: max. 10 mm material thickness Hole diameter: max. Ø 50 mm Distance between upper and lower bracket: 19 mm Punch holder: Ø 78 mm Cutting plate outer diameter: Ø 78 mm Cutting plate thickness: 20 mm Drop-out opening in punching bracket: 52 mm Installation height: approx. 220 mm - Punch holder as a punch unit with punch mount and material stripper with disc springs - Punch holder rotation-proof guided and spring-loaded - Punch length 97 mm, shank Ø 35 / 50 mm - Round hole tool: punch Ø 41 mm and die Ø 41.5 mm - Long fixing hole: 270 x 13.5 mm Ledoxbh N Tepfx Aa Ioru Dimensions of punching bracket (L x W x H): 550 x 95 x 220 mm Weight: 27.5 kg Good condition 4 units available, price per unit 3 units with Ø 41 mm punch tool 1 unit with Ø 43 mm punch tool

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Lsdpfx Aaoltrmuj Ijru Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: used, Punching bracket, punching unit SUPRA-CLAP type C7 300 Throat depth: 300 mm Punching capacity: max. 2 mm material thickness Hole diameter: Ø 2 to Ø 7 mm Distance between lower die and punch holder: 7 mm Distance between upper and lower bracket: 12 mm Punch shank: Ø 7 mm Die outer diameter: Ø 20 mm Die thickness: 12 mm Pass-through opening in punching bracket: 11 mm Installation height: 142 mm - Standard punch length 70 mm with 60° head - Equipped with a round hole punch approx. Ø3 to 4 mm - Punch holder with stripping spring and return spring - Mounting slot 50 x 14 mm and 8 mm locating pin Dimensions punching bracket L x W x H: 390 x 26 x 145 mm Weight: 3.7 kg Good condition Lsdpfexbh N Hox Aa Isru 13 pieces available, price per piece