Cnc lathe

Broadbent Heavy Duty Centre Lathe

Condition: new, machine/vehicle number: 1, empty load weight: 7,500 kg, maximum load weight: 22,500 kg, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 10,070 mm, loading space width: 252 mm, loading space height: 85 mm, suspension: air, tire size: 245.70 r 17,5, color: yellow, Year of construction: 2022, Equipment: ABS, tail-lift, 10.70m new ceylan 2-axle truck 2 axles, 1st liftable and 2nd steerable, ebs, air suspension, 8 ton side rud hooks cad1, pier seats and slots in dock x belt anchorage, 4.0m total electro hydraulic double ramps, h.from ground platform 85cm, platform length 7.0m, WARRANTY and READY FOR DELIVERY SAFETY, INTERDRIVE SRL-PARMA CONCESSIONARIA Nedpfx Ash Utdljkfola

Condition: excellent (used), Year of construction: 1993, spindle bore: 118 mm, turning diameter over bed slide: 635 mm, turning diameter over top slide: 390 mm, turning length: 2,000 mm, total length: 4,170 mm, total width: 1,960 mm, total height: 1,800 mm, spindle speed (max.): 1,250 rpm, swing diameter over cross slide: 390 mm, bed width: 480 mm, overall weight: 5,200 kg, Centre lathe Colchester 600 - MAGNUM 1250 MACH-ID 9464 Make: Colchester 600 Type: MAGNUM 1250 Year: 1993 FAGOR 2 Axis Dro Feed all directions Conical turning attachment DBC Turning Length: 2000mm Swing over bed Ø: 635mm Swing over cross slide Ø:390mm Swing in the gap Ø: 900mm Gap length: 300mm Spindle bore: 118mm Spindle power: 22kW Bed width: 480mm Tailstock spindle Ø: 95Ø Stroke pinole: 190mm Spindle taper: 6Mk Speeds / ranges: 1250Rpm Length: 4170mm Nedpfx Aoyuwwhokfela Width: 1960mm Height: 1800mm Weight: 5200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Grinding length: 973 mm Center height: 250 mm Maximum worktable tilt: +6° / -9° Centering center: MT5 Maximum grinding head travel: 100 mm Maximum grinding head tilt: +45° / -30° Maximum grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Maximum workpiece weight between centers: 400 kg Maximum internal grinding device grindable bore: 160 mm Machine weight: approx. 5,000 kg Nodswhp Dnopfx Akfela

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 4ROLL, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 420 mm, roller diameter: 470 mm, roller length: 3,050 mm, working width: 3,050 mm, working height: 1,800 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, overall weight: 43,000 kg, total length: 7,700 mm, total width: 2,410 mm, total height: 2,470 mm, power: 37 kW (50.31 HP), input voltage: 380 V, type of input current: three-phase, working length: 3,050 mm, Equipment: documentation/manual, emergency stop, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm Nljdowb Scmopfx Akfja -central rolls upper/lower 470 mm -side rolls left/right 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Hydraulic tank capacity oil 350 liters – power electric 37 Kw voltage 380 /50 • Dimension 7700 x2410 x H 2470 mm - weight 43000kgs

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Nlodpfewbuyzsx Akfea

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Nledpjtiwgijfx Akfoa Separate control cabinet Ritta Side passages Ground level installation

Condition: excellent (used), Year of construction: 2007, operating hours: 25,181 h, functionality: fully functional, EQUIPMENT: Synchronous spindle Driven tools C-axis Rear-side machining Parts conveyor belt FMB Turbo bar feeder magazine Nlsdpfx Asyk A Ukjkfoa Chip conveyor

Condition: used, Year of construction: 1988, functionality: fully functional, Gear Grinding Machine VEB ZSTZ 630 C 3 P – 1988, Ready to Operate Description: For sale: gear grinding machine from the German manufacturer VEB Werkzeugmaschinenkombinat, model ZSTZ 630 C 3 P, year of manufacture 1988. The machine is in good technical condition, available immediately, and ready for inspection. Currently connected to power, allowing immediate testing of its operation. Ideal for workshops specializing in precise gear machining and industrial machine repair. Specifications: Manufacturer: VEB Werkzeugmaschinenkombinat Nledpeyfq E Hsfx Akfja Model: ZSTZ 630 C 3 P Year of manufacture: 1988 Condition: good technical condition Availability: immediate Ready for inspection, connected to power Contact: Please contact us for inspection arrangements or further information.

Condition: good (used), Year of construction: 1988, grinding length: 1,000 mm, grinding width: 550 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic clamping plate SAV 1000 X 400 mm Fine pole pitch 45-5 mm Nljdpfx Aeu Rqynekfoa Electric straightening device with compensation Digital display vertical Holder with grinding wheel max. 400 X 100 X 127 mm Spindle motor 7.5 KW 1435 min/1 Setting wedges Coolant system with universal paper belt filter Complete documentation

Condition: used, Technical details: turning diameter over bed: 320 mm turning length: 800 mm Nljdou Ixy Depfx Akfsa centre distance: 800 mm centre height: 150 mm spindle bore of work spindle: 30 mm range of revolution per miute: 35 - 1500 / 16 step U/min range of feed in x - axis: 0,04 - 2,4 / 30 step m/min tailstock quill adjustment:: 125 mm tailstock taper MT: MK2 dimension machine xH: 1,7 x 0,8 x 1,5 m Equipment and other features: -3-jaw chuck Röhm 160mm -chuck guard -protection system WxH: 510x400mm -Multifix tool clamp (4 pieces) -Tip in tailstock -Upper slide swivels +/- 45°, maximum travel = 100mm -Cross slide travel = 300mm feed Pump for coolant device (without feed) *