Vertical machining center

BROTHER TC-S2A-O

Condition: used, Year of construction: 2021, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 508 mm, feed length Z-axis: 635 mm, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, nominal power (apparent): 26 kVA, torque: 122 Nm, controller manufacturer: HAAS, Used Machining Center Njdpjxqct Sefx Adwokt Brand: HAAS Model: VF-4 Year: 07/2021 Serial number: 1183245 Operating hours: Spindle on time: 6,000h Specifications: - Travels (X, Y, Z): 1270mm, 508mm, 635mm - Spindle-to-table distance (Min. - Max.): 107 - 742mm - Spindle speed: 8100 rpm - Spindle taper: ISO 40 - HAAS CNC Control - HaasDrop (for wireless file transfer to CNC) - Rigid tapping; synchronized tapping, with integrated tapping cycles and up to 8 retract speeds. - Safe Run; a HAAS Control software function that reduces the risk of significant damage in case the machine is impacted. - Tool changer carousel: 20 tools - Includes early power-failure detection module. - Coolant tank: 208 liters with coolant kit - Variable-flow coolant pump allows control of coolant flow and pressure via M-codes. - Maximum tool diameter: 89mm (adjacent tool slots filled) - Maximum tool weight: 5.4kg - Table dimensions: 1321 x 495mm - Maximum table load: 1588kg - Maximum rapid traverse (all axes): 25.4 m/min Included options: - Preparation for through-spindle coolant - Auger-type chip conveyor - Programmable coolant nozzle, multi-position device that automatically and precisely directs coolant to the cutting tool

Condition: good (used), Year of construction: 2008, BROTHER B00 CONTROL UNIT AXIS TRAVELS: TRAVELS: Z 415 X 550 Y 400 MM. DISTANCE BETWEEN TABLE AND SPINDLE NOSE 645 MM. RAPID TRAVELS XYZ 70 M/MIN. WORKING SPEED XYZ 1-20000 MM/MIN. REPEATABILITY ERROR +/- 0.003 MM. POSITIONING ERROR 0.005 ON 300 MM. N.2 TABLES WORKING AREA 600x425 MM. PERMITTED WEIGHT 200 KG. TABLE POSITION 3.4/180° SPINDLE POWER 16 KW SPEED 12000 RPM Nksdpju Spr Eofx Adwot HSK TAPER A 40 RIGID TAPPING 8000 RPM MAX TOOL CHANGE TOOL MAGAZINE CAPACITY 40 PLACES TYPE OF SELECTION RANDOM TOOL CHANGE TIME 0.9 SEC. CHIP/CHIP TIME 2 SEC. OPTIONS CHIP CONVEYOR SPINDLE OVERRIDE WORK AREA LAMP ROTARY JOINT COOLANT THROUGH SPINDLE N.2 LEHMAN IV AXIS TABLES COMPLETE WITH COUNTER-SUPPORT

Condition: new, Year of construction: 2026, The ATC series was created for professional use in large industrial plants and factories. Like the plotters of the SPECIAL series, it can be designed for machining various materials. To meet the demands of heavier machining, ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The standard in these devices is a vacuum work table. It is also possible to install a hybrid table. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. MATERIAL FASTENING: The machine is equipped with a vacuum table. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm Nksdpfx Adoin Etzswjt DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. Nkedpfx Aoxab R Uedwst - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: new, Year of construction: 2026, Technical data Control system multi-axis real-time interpolator, with active trajectory prediction, LAN communication, EtherCat, sampling time below 1ms, correction map, RTCP, remote service access Working area 2100x4100mm Z-axis clearance 400mm Drive system servo drives with EtherCat protocol, X, Y hardened helical strips ground in accuracy class 6, Z axis ball screw in accuracy class 5 Linear bearings trapezoidal rails Nksdpfx Adevyrgqjwst Speed ​​of travel up to 60 m/min Program resolution up to 0.0001 mm Positioning accuracy 0.01mm Gate drive double-sided master/slave with gate angle correction Electric spindle 17kw s6 tilt/rotate head kit axis range a= +- 185°, c= +- 320°, orbital k plus px-2 15/12 63f nc hsk63 for 5 axis machines Tool cone HSK63F Maximum speed of the electrospindle up to 24,000 rpm Design welded steel, ribbed, stress-relieved, precisely machined Milling cutter shank diameters from 2 to 20 mm (optional up to 26 mm) Brushless electrospindle Table type vacuum, pneumatic sections Equipment options 3-position linear magazine 16-position revolver magazine with tool presence sensor positioning bases and vacuum blocks automatic central lubrication with solid grease pressure booster security fence intelligent vacuum sections wireless manipulator sensor for measuring the length and diameter of the tool positioning laser

Condition: excellent (used), Year of construction: 2008, For sale: CNC BROTHER in very good working condition. Njdpfjyapylex Adwjkt

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 900 mm, feed length Z-axis: 800 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 3,130 mm, total width: 3,680 mm, total length: 5,350 mm, table width: 800 mm, table length: 2,000 mm, table height: 500 mm, position of the milling head: souvisle řízená ve 2 osách, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 20 rpm, table load: 3,000 kg, overall weight: 9,000 kg, workpiece weight (max.): 3,000 kg, Equipment: rotational speed infinitely variable, FSGQ 80 SM/A2 CNC - TOS KUŘIM Bed-Type Milling Machine, Table Length 2m Control System: Heidenhain TNC 530 Availability: In stock FSGQ 80 SM/A2 CNC – Technical Specifications: Basic Machine Data: Manufacturer: TOS Kuřim Overall length: 5,350 mm Overall width: 3,680 mm Overall height: 3,130 mm Total weight: 9,000 kg Total power requirement: 35 kVA Working Range: Longitudinal travel, X axis: 2,000 mm Transverse travel, Y axis: 900 mm Vertical travel, Z axis: 800 mm Spindle Head (Head S): Nedpfxoxp Iyuo Adwjkt Spindle taper: HSK-A 63 Max. power: 19.3 kW Speed range: 20 – 4,000 rpm Number of speed stages: stepless Machining: stepless in 2 axes Feed Range X – Y / Z: Number of stages / range: stepless / 5 – 20,000 mm.min-1 Table: Table size: 800 x 2,000 mm Max. table load: 3,000 kg Tool Changer: Number of tools: 24 Low-pressure tool cooling: 4 bar High-pressure cooling: 20 bar Control system: Heidenhain TNC 530 Further details upon request.

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, position of the milling head: VERTIKÁLNÍ, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2,500 rpm, table width: 630 mm, table load: 2,000 kg, table length: 2,200 mm, table height: 800 mm, total height: 3,670 mm, total width: 3,250 mm, total length: 5,000 mm, type of input current: three-phase, rotational speed (max.): 2,500 rpm, workpiece weight (max.): 2,000 kg, overall weight: 14,500 kg, year of last overhaul: 2025, torque: 900 Nm, spindle motor power: 23,500 W, power: 23.5 kW (31.95 HP), Equipment: rotational speed infinitely variable, FCQV 63 CNC - TOS KUŘIM Bed Type Milling Machine System: TNC 415F Warranty: 6 months Availability: immediately available FCQV 63 CNC Technical specifications: Manufacturer: TOS Kuřim Overall length: 5,000 mm Overall width: 3,250 mm Overall height: 3,670 mm Total weight: 14,500 kg Number of tool magazine positions: 24 Total power consumption: 45 kVA Working range: Longitudinal travel X-axis: 1,500 mm Cross travel Y-axis: 630 mm Vertical travel Z-axis: 630 mm Spindle: Spindle taper: ISO 50 Number of speeds / speed range: stepless / 11 – 2,500 rpm Spindle motor power: 23.5 kW Max. spindle torque: 900 Nm Feed rate range X – Y / Z: Number of speeds / range: stepless / 1 – 2,000 mm/min Rapid traverse: 10,000 – 10,000 / 10,000 mm/min Table: Nkedpfx Adjxp Dz Uswot Table size (width x length): 630 x 2,200 mm Max. table load (axially): 2,000 kg Control system: Heidenhain TNC 415F Further details upon request.

Condition: ready for operation (used), Year of construction: 2008, Main Drive Spindle speed range 20000 Tool taper HSK A-40 Number of axis 4 Movement X-Axis Movement 550 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 400 mm Nkjdox D Rdropfx Adwet Y-Axis Rapid Traverse 70 m/min Z-Axis Movement 415 mm Z-Axis Rapid Traverse 70 m/min This 4-axis Brother TC-32BN QT was manufactured in 2008, featuring a Brother B00 control system, X-axis travel of 550 mm, Y-axis travel of 400 mm, and Z-axis travel of 415 mm. It boasts rapid traverse rates of 70 m/min, a spindle speed up to 20,000 rpm, and a tool magazine with 40 positions. Consider the opportunity to buy this Brother TC-32BN QT vertical machining centre. Contact us for more information about this machine. Application Types Milling