Pure steam generator

BWT VT2000

Condition: like new (used), Year of construction: 2012, operating hours: 3,432 h, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale: Jumag steam generator with gas burner Type C 600 Kedoydq Niepfx Alyonc Steam output: 600 kg/h. Max. steam pressure: 13 bar. Like new, only 3,432 operating hours. Delivery available at extra cost. If you have any questions, please contact us.

Year of construction: 2005, condition: excellent (used), KLIKLOK CERTIWRAP C-80 ID.NO. 2505 Kliklok HST Certiwrap C-80 sleeve machine for putting cardboard packaging around products. 3x different tools included & associated Nordson glue set year mod 2005. Knjdjki Tlqopfx Alyjc No. 1. 160 x 388 mm. No. 2. 160 x 407 mm No. 3. 422 x 162 mm dimensions 470 x 130 H 170 cm.

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Kjdpfx Aet Rmhaslyenc Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Year of construction: 1980, condition: good (used), strip width: max. 1.650 strip thickness: max. 3 mm blade shaft Ø: 165 mm speed: max. 150 m/min Knjdod Ha Hmopfx Alysc

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Kjdpfjvrfivox Alyonc - Capacity: 9,500 bph - Cell Pitch: 95 mm - Bottles per row: 25 - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Year of construction: 2023, condition: excellent (used), functionality: fully functional, TOP workbench AT 2000 with beech wood top and drawers Beech wood worktop with a raised edge at the back Drawer unit on the left Storage shelf on the right at the bottom Stainless steel design Dimensions approx.: 2000 x 800 x 980 mm, W x D x H Knodpfx Alexiu I Eoyec Used equipment, cleaned Quality from a specialist company! Benefit from over 35 years of experience Visit our large showroom!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, EDF Flexy Feed Prefeeder Casemaker EDF 821 FD Full Servo Swing no crash feeder N. 6 colors flexo printing units from top, fixed type (they can be opened for maintenance) Knodpfxjwhy Abj Alyjc N. 6 infrared dryers Vacuum transport between printing units made by steel platform and belts Double-shaft slotting unit Rotary die cutter with upward disengagement for die cutting replacement when machine is running Stripper transfer unit before folder gluer Folder gluer vacuum transfer full servo controls Valco clear vision gluing unit Counter ejector EDF Unipal palletizer with automatic sheets and pallet inserter Siemens Electronics Available August 2027

Condition: used, Guard Rail Roll Forming Line: Ksdpfxjxnmmqo Alyonc • The production line for road safety barriers consists of: • Accessories and rollers for the production of 2- and 3-wave guard rails • Bending machine for 2- and 3-wave profiles • 19-station roll forming machine, complete with rollers and motorization • No. 3 punching stations • No. 1 cutting station • No. 7 hydraulic power units • No. 1 station with feeding rollers

Condition: refurbished (used), Year of construction: 2016, Stainless Slitter 1500x3, made SAMO OCEMI Completely revamped in the year 2016. Technical specifications Thickness minimum: 0,4mm Thickness maximum: Up to 4mm with Rm 400N/mm2 | Up tp 3mm with 700 N/mm2 Coil width: max 1.540 mm. Max coil weight: 16 t Direction: left to right Speed: up to 150 m/min. Scope of supply · Coil car, hydraulic, Over floor · Decoiler, hydraulic expansion, with DC motor 28 kW-717-2.200 rpm, for dynamic brake and energy recovery. Stationary disk brake. Motorized snubber roll. Paper rewinder. Alignment. · Coil opener with telescopic table. · Feeding unit with pinch-roll and 3-rolls straightener. · Centering unit (motorized) with 3 flattening rolls (poliurethane). · PVC film applicator (new 2017) · Slitting head, shaft diam.: 200 mm. DC motor 72 kW 780-2.652 rpm + stationary brake. · Turnstile knife charger – 2 arms couples. · Tension pinch-roll DC motor 23 kW 1.960 rpm + stationary brake. Scrap table, movable, with scrap conveyor. · Scrap rewinder, single drum dimension 600x600. Ac motor 15 kW with inverter. · Bypass table (loop) · Braking car (movable) with: - double separating roll - Deburring pinch-roll (new in 2017) - Felt press - Braking rolls-with DC motor 33kw-2.550 rpm for strip tension adjustment and energy recovery. - Cross cutting shear (crop shear) - Deflector roll - Recoiler, hydraulic expansion, separating arm with automatic lifting system. DC motor 114 kW 800-2.400 rpm + stationary brake. · Discharging coil car, over floor, with press arm. · Turnstile arm 4 x 20 t, motorized · Electric EQUIPMENT (NEW in year 2016). Supply voltage 3x380V Consisting of: Cabinet Dimension mm 5.600 x 600. With PLC Siemens S7-300. N. 3 operator switchboards. The main switchboard with HMI touch-screen Siemens Touch Knjdpoymcmfofx Alyjc · Hydraulic equipment. Hydraulic power pack with oil-air cooling. Manifolds with electric valves on each machine, 24 V DC · Complete safety fences, mechanical/optical. · Cutting tools (knifes approx. 160 pieces, spacers, separating discs..). Documentation Foundation drawings Electric drawings. Hydraulic plan. PLC and HMI Software. CE declaration of Conformity Thickness minimum: 0,4 mm Thickness maximum: Up to 4 mm with Rm 400N/mm2 | Up tp 3 mm with 700 N/mm2 Coil width: max 1.540 mm Max coil weight: 16 t Speed: up to 150 m/min Direction: left to right

Condition: repair required (used), Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 828-043, total width: 1,800 mm, number of ink cartridges: 8, color channels: 7, number of print heads: 64, The Kornit Allegro is a high-performance textile printing machine that offers outstanding print quality, high speed, and versatility. It is particularly suitable for textile printing companies that want to produce top-quality prints in large quantities (roll-to-roll) on a wide variety of fabrics. Up to now, it has primarily been used for printing cotton fabrics: jersey, French terry, cotton woven fabric, canvas, sweatshirt fabric, and viscose & modal qualities. It is being sold due to a business downsizing. The textile printing machine is currently still in operation and can be inspected at any time by appointment. We are still printing fabrics with it. However, the machine would need to be serviced – the slave PC is slow, and the color channels would need to be reworked. The following items are included with the machine: dryer, unwinder, and rewinder. In other words, a complete production line. In addition, we will also include all remaining spare parts, inks, etc. IT IS BEST SUITED AS A SPARE PARTS STORE, IF PARTS ARE MISSING,... Kjdpjvmdw Iofx Alysnc Technical data: Ink type: Kornit NeoPigment Intenso, water-based Ink capacity: 4 liters Colors: Cyan, Magenta, Yellow, Black, Red, Green, Gray Print heads: 64 x Spectra Polaris, recirculating – (7 color channels, 1 channel for pretreatment) Print width up to 180 cm Printing speed: Up to 200 m²/hour Printing modes: Several printing modes from 400-1200 dpi Recommended printing mode: 600 x 600 dpi in 6 passes using the staggered line printing method Weight: 3500 kg Power supply: 110/220V, 60/50 Hz, 40A, 3Ph+N+GND 25kW Media transport: High-precision, adhesive belt conveying system Fabric feed system: Axial unwinding device with adjustable fabric width and tensioning mechanisms Max. media thickness: 15 mm Max. roll width 180 cm Max. roll outer diameter: 40 cm Max. roll weight: 50 kg Compressed air: 6-8 bar / < 0.4 m³/min IF THE MACHINE IS TO BE PUT BACK INTO PRODUCTION, IT WOULD BE RECOMMENDED TO HAVE THE MACHINE OVERHAULED AND REBUILT/SERVICED BY KORNIT – THE BUYER WILL BE RESPONSIBLE FOR THESE COSTS!