Bystronic Drehtisch

Condition: ready for operation (used), Year of construction: 2008, • Glass thickness (mm): up to 30 • Glass height (mm): up to 2000 • Cleaning brushes: 4 front and 4 rear Kjdpfxjxgtqgs Abcedi

Condition: used, Year of construction: 2007, operating hours: 3,900 h, FOR SALE A BEVELING MACHINE IN VERY GOOD CONDITION FROM NEW IN A SMALL GLASS FACTORY. SEE IN WROCŁAW Kdodpfx Aowb U Rgsbcoi

Condition: excellent (used), Year of construction: 2008, 2-component extruder HDT HD Pro 6 Easy SI Year of production: 2008 (Overhauled in 2019) For Silicone Hydraulic Very good and clean condition As is Available immediately Kedpfx Ajwngagjbcjdi

Year of construction: 1999, condition: excellent (used), Glass tilting and transport table TRIULZI-IG Kdodjiy Dtbjpfx Abcsi Hydraulic With castor rollers Rollers are moving down for 360 degree glass movement (for sealing) 3600 mm length and 2400 mm working height Good working order Good condition As is Available immediately

Condition: used, Year of construction: 2004, functionality: fully functional, Glass thickness: 3 ÷ 40 mm Minimum operating height of sanding belt: 50 mm Minimum size of workpiece: 70x70 mm Installed power: 20 kW Minimum compressed air pressure: 6 bar Max compressed air consumption: 25 Nlt/min Length: 7043 mm Width: 1890 mm Height: 2300 mm Conveyor load capacity: 200 kg/m Weight: 2800 kg Processing speed: 0.5 ÷ 5 m/min Water tank capacity: 720 l Additional technical data can be provided electronically. Kdsdpfx Aexyv Riebcji

Year of construction: 2020, operating hours: 1 h, condition: as good as new (ex-display), High pressure cleaner PTC CJ-1E similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 110 bar - Flow rate: 12 l/min. - motor: electric 4-pole 230V 2,2kW, 1400 1-min - dimensions: 540 x 440 x 680 mm Kdodpfx Ajgcbzcjbcei - Empty weight: approx. 40 kg - High pressure pump: Comet three plunger pump with ceramic plungers - Stable plastic housing made of injection moulding - Practical holding device for gun with lance - Self-priming pumps with EASY-START device - Handle with holders for mains cable and high pressure hose - Easy maintenance by simply removing the front panel - Large wheels (220 mm Ø) for easy movement on steps and over uneven terrain - Pressure gauge - Built-in professional relief valve - Delayed TotalStopp - Pulsating system - Rotary switch - Thermal motor protection - Stainless steel manual hose reel with 30 m of 1/4" HD hose - 2 pieces 1/4" F pipe cleaning nozzles - Gun with wash lance and flat spray nozzle The CJ-1E is a mobile high pressure washer ideal for cleaning and unclogging pipes 30 to 120 mm. Equipped with a 2.2 kW and 230V electric motor, it can be used in apartments, houses or commercial spaces for sinks and toilets, as well as garden and general cleaning. The Comet LW-K pump with Easy-Start and pulsation function guarantees extreme reliability and high cleaning performance.

Condition: good (used), Compact storage system with 12 stations. Load capacity per shelf: 2700 kg. Glass support: 280 mm. Length: 5900 mm, depth: 3600 mm, Height from floor to glass shelf: 290 mm, Kdsdpfx Abeu R Rmuscei Height from glass shelf: 2040 mm, Total height from floor: 2330 mm.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. Kodpsr Ak Exjfx Abcsdi There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: like new (used), Year of construction: 2004, Double-side glass drilling machine BUSETTI GIO 1250 Semi-automatic Year of production: 2004 With roller table With manual positioning Water tank with pump included Very good and clean condition Kjdpfx Asiy Dxksbcodi Availability immediate

Condition: good (used), Year of construction: 2003, Washing height 1250 / Open top, 4 brushes / water tank, pumps, 7.5kW / blower cabinet for drying zone, Running direction: right to left, Total length: 6450 mm, Height: 2100 mm, Depth of washing machine: 1300 mm, Width: 1700 mm, Dimensions for blower cabinet: Height: 1100 mm, Length: 700 mm, Width: 700 mm Kjdpjt Ah Npefx Abcjdi