LSAM Extruder

CEAD S25 Extruder

Condition: ready for operation (used), Year of construction: 2024, operating hours: 8 h, clamping force: 100 kN, screw diameter: 18 mm, total width: 526 mm, total height: 1,692 mm, overall weight: 450 kg, product length (max.): 1,485 mm, Hydraulic injection moulding machine manufactured in 2024. This BOY XS 161 features a clamping force of 100 kN and a maximum injection pressure of 2298 bar. It includes a 18 mm screw diameter and a theoretical shot volume of 6.1 cm³. If you are looking to get high-quality injection moulding capabilities, consider the BOY XS 161 machine we have for sale. Contact us for further details. • Control system: Procan ALPHA 4, 15" multi-touch HMI • Injection pressure: max. 2298 bar • Theoretical shot volume: 6.1 cm3 • Distance between tie bars: 160 mm (205 mm diagonal) • Max. daylight between platen: 250 mm • Adjustable opening stroke: 150 mm • Min. mold height: 100 mm (optional 50 mm) Dcjdpfx Apsyw I Azjtel • Hydraulic system pressure: 300 bar • Oil tank capacity: 28 liters • Installed total power: 6.1 kW • Electrical supply: 400 V 3~ N, 50/60 Hz, 12.4 A • min. machine height: 1380mm • max. machine height: 1692 mm • Footprint: 0.78 m2 • Safety guarding: Fully enclosed clamping zone with clear polycarbonate sliding safety gate and electrical interlock • Peripheral interfaces: Pneumatic and cooling water connectors on the non-operator side • Status indicators: 3-tier LED signal tower (Red/Yellow/Green) Additional equipment (accessories) • 3-liter gravity material hopper • Red 16A CEE power plug • Heavy-duty wooden transport/leveling base

Year of construction: 2002, condition: excellent (used), 10-2 bar, year of manufacture 2002 Dcsdpfjykyqijx Aptel

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Dsdpfjiryyasx Aptscl Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: used, Year of construction: 2012, functionality: fully functional, Fully refurbished, 12 months warranty -Unit on base frame -Maximum temperature: 1300 °C -Oven chamber volume: 120 liters Dcodpfxjyn Emqe Aptsl -Oven chamber: 500 x 500 x 500 mm (W x D x H) -Control cabinet separate -Eurotherm 3504 -Parallel swing door for opening in the hot state -Slot in the oven collar, bottom right (for retrofitting CO2 and N2 gas supply in a gas supply box, not included!) -Power: 15 kW -Connection: 400V 3/N/PE 50 Hz -Weight: 410 kg -Documentation, CE declaration Oven, furnaces, industrial oven, muffle furnace, heat treatment oven, chamber furnace

Condition: good (used), Code: 0749 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TT 3 1300 Automatic sanding machine for worktops, furniture, panels, tables Technical data: Working width mm 1300 Max working thickness mm 130 Min working thickness mm 1 Composition: 1° Transversal belt - Motor Hp 15 - Electronic speed variator with display 2° Transversal belt - Motor Hp 15 - Electronic speed variator with display Transversal sanding belt size mm 1350 x 150 Chevron belt size mm 5510 x 140 Belt blowers Belt feed speed mt/min 5/25 Fixed table and mobile head for on-line set-up Panel cleaning rotary blowers Vacuum table Belt cleaning brush Infeed roller conveyor Installed power Kw 32 Compressed air 7 Atm Dcsdpfx Ash T Dzqoptel Suction inlets: n° 2 diameter mm 200 - n° 2 diameter mm 150 - n° 2 diameter mm 100 Overall dimensions mmm 4400 x 2500 x 1600 h Weight kg 5000

Condition: excellent (used), Year of construction: 2022, operating hours: 4,605 h, functionality: fully functional, Controller: FANUC 31i-B5 Max. turning diameter: ø540 mm Max. turning length: 1.020 mm Spindle bore / bar capacity: ø76 / 65 mm Y-axis travel: 170 mm (±85) Milling spindle: 12.000 rpm, 18.5 kW Tool magazine (ATC): 80 stations, Capto C6 Tool change time: 2.0 s Djdpfx Apezilupotecl Counter spindle: 5.000 rpm, 22 kW Spindle power: 22 / 18.5 kW (S1/S6)

Year of construction: 2003, condition: good (used), functionality: fully functional, Equipment: documentation/manual, ITALMATIC Autoclave AIT ø 2600x5000 year 2003, in good condition, available now, fully functional P.S.: 13 barg Tmin/Tmax: +20 / +175 C Volume V: 33900 litres Dcodpfx Apjy N Ubbotjl Fluid group 2: AIR Module: B+F Test Pressure TP: 20,7 barg CAT.: IV Inspection is possible by appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, load capacity: 6,300 kg, For sale is a nearly new overhead crane system from Konecranes. The crane is the CXTS model (single-girder bridge crane / profile girder) and is in excellent condition. Dcodpfx Aeykbimsptel ATTENTION: The crane shown in the listing photos has already been sold. However, an identical model is still available, but will not be ready for delivery until the end of 2026. TECHNICAL DETAILS - Capacity: 6,300 kg - Span: 18,600 mm - Lifting height: 6.00 m - Year of manufacture: 2020 - Lifting speed: 4.0 / 0.7 m/min (2-speed) - Trolley travel speed: 20.0 m/min (stepless) - Crane travel speed: 32.0 m/min (stepless) MACHINE DETAILS - Weights: Trolley weight: 440 kg; Crane weight without trolley: 1,832 kg - Classification: Crane Class: S3 (DIN 15018); Hoist mechanism group: FEM 2m (ISO M5), Crane drive group: FEM 1Am (ISO M4) - Electrical data: Power supply: 400 V / 48 V / 50 Hz, Rated power: 4.9 kW EQUIPMENT - Radio remote control with push-button transmitter - Additional mobile pendant control (emergency control) - Overload protection and load data memory - Pre-limit and end-limit switches for crane and trolley travel - Signal horn, charging station, and spare battery - Hook collision protection Transport dimensions of the bridge: - Total length: 19,328 mm - Profile height of girder: 622 mm - End carriage width (wheel base): 2,200 mm Transport and loading can be organised across Europe at additional cost if required. Prices excl. VAT Inspection by prior appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Trading - Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For more information or to contact us, please visit our website.

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 END ATTACHMENT - Number of positions : 7 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 7 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2200 x 1200 [mm] - Machine height : 1700 [mm] - Machine weight : 2200 [kg] Dsdpfx Apjy Dim Ijtocl MACHINE HOURS - Number of hours under power : 107555 [h] - Number of working hours : 91025 [h] - Number of spindle hours : 54783 [h] EQUIPMENT - CNC : Fanuc 300is-model A - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank

Condition: new, Year of construction: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z axis range: 500 – 1500 mm Linear bearing: Bosch Rexroth 35 Speed: X, Y up to 45 m/min; C, A up to6000 degrees/min Program resolution: 0,0005 mm Positioning accuracy: 0,01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 8 kW up to 36 kW Electrospindle inverter: yes Maximum revolutions of the electro-spindle: 24 000 rpm (option 6000, 40 000 50 000) Dsdpfon Nv H Ssx Aptocl Construction: Steel welded, ribbed, stress relieved, precision machined Table type vacuum, hybrid, steel, aluminum with M16 or M18 holes