Gravure Printing and Dip Roller System

Chadwick (P+S Tapeten) Kombianlage

Condition: excellent (used), Year of construction: 2018, Converting Line GM 330 FB-D (Hot stamping + Screen printing) Year of manufacture: 2018 Manufacturer: Grafisk Maskinfabrik Maximum web width: 350 mm Minimum web width: 50 mm Maximum unwind diameter: 700 mm Maximum rewind diameter: 600 mm - Vetaphone Corona Treater - BST Web Guiding System Hot Foil Stamping Unit (Flatbed) Speed: 6,000 impressions/h or 10-15 m/min Web width: 110 mm - 330 mm Dual foil unwind and rewind with 250 mm diameter Substrates: 50–500 µm Plate thickness: 5-10 mm (7 mm standard) Stamping pressure: 30 tons Hnedpfx Adew I T Ucswsg Foil feed in both transverse and longitudinal direction (rotatable turret) Temperature range: 80° - 130° C Heating time approx. 20 min. Screen Printing Unit Speed: 4,000 cycles/h or 5-15 m/min Web width: 110 mm - 330 mm Frame size: 660 mm x 500 mm Frame type: 30 mm x 30 mm aluminum frame Printing area: 330 mm (length) x 330 mm (width)

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Hsdpfen D Ew Iox Adwsng Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: used, Year of construction: 1997, functionality: limited functionality, product width (max.): 510 mm, working width: 505 mm, • Model: Gallus Arsoma EM 510 • Year of Manufacture: 1997 • Web Width: 510 mm • Printing Units: 7 x UV flexo units Hjdpew Ec Smjfx Adweng • Die-Cutting Units: 2 • UV Drying: Included • Glue: Included • Barcode Printing Capabilities: Supported • Web Turnbar (Turner Bar): Included • Web Cleaning: Included • Roll-to-Sheet Conversion: Included • Unwinder: Included • Rewinder: Included • Chiller: Included

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Hnedpfx Aok Hz Nqedwog Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Rotary vane vacuum pump Hodpfx Adocu Tirswjng Oil circulation lubricated Manufacturer: Busch Type: RC 1000 B Status: Refurbished Warranty: 12 months Suction capacity: ca.1000m³/h Ultimate pressure: approx. 20 mbar Operating medium: Mineral oil (Inclusive) Delivery time: 2 Wo.

Condition: ready for operation (used), functionality: fully functional, 4 printing units 12 " water cooling unit 2 perforated units It is in good condition Hnedpfx Aswhqnzsdwog in production

Year of construction: 2023, condition: excellent (used), RIETSTACK IRS modular equipment - IRS 430 Maximum web width - 420mm Maximum mechanical speed - 200m/min Electric power 3x400V 50 Hz (5P-32A) Compressed air 6 bar Module unwind unit equipped with: Pneumatic unwind spindle - 76mm Maximum unwind diameter - 800mm Micro-processor control system Electronic counter (labels/meters) Splice table with 2 pneumatic clamps Precise adjustment of rewind and unwind web tension Electronic correction of web tension on unwind Flag detector Automatic stop at roll end De-curl-bar-unit Hedpfxjxc Ivpo Adweng Web guide BST Splice table with 2 pneumatic clamps Module for die cutting station Modified to work with BOBST M5 magnetic cylinder Die cutting station standard (including matrix rewinder) Maximum working width of magnetic cylinder - 420mm Magnetic cylinder repeat size - 96T-220T Magnetic cylinder one included - 96T Die-cutting unit driven by servo drive Nip roller servo driven Matrix rewind spindle is driven by servo Matrix rewind spindle-diameter - 76mm Maximum rewind diameter-matrix - 600mm Matrix pneumatic pressure roller Hydraulic pressure read out 2 clocks Modified pressure bridge allowing to lift the magnetic die cylinder without hoist to mount the magnetic die plate. Matrix pneumatic pressure roller Nonstop stacker running max. 4 streams Delivery conveyor servo driven with vacuum belts and vacuum pump Simco antistatic bar: 3 pcs Max. width 420 mm Max. stack length 630 mm Max. stack height 120 mm Max. stack speed 80 m/min Stack height control by counting the sheets in the stack Speed dependable on material Stacks delivery by pushout system Stacker running full automatic continuous running mode Min size for ready stacks production is 50x50mm Smaller labels can be collected at the end of the conveyor Electric power 3x400V 50Hz (5P-16A) Compressed air 6 bar Control panels with HMI touch screen panels

Condition: new, Year of construction: 2025, functionality: fully functional, Labeling system for round and square canisters Stainless steel frame 170 mm wide link chain (optionally wider possible) Standard label width 140 mm or 190 mm, optionally up to 260 mm possible Label length 300 mm, optionally longer Dispensing speed up to 30 m/min., optionally 50 m/min Product diameter according to technical testing from 20 mm - 170 mm, optionally other sizes possible Touch screen display, with storage option Label dispenser with three-dimensional adjustment option Product separation with two-sided belts Product alignment for square bottles Top belt guide for square and oval products Hjdpfx Aou Ia E Isdweng Other labeling options, such as lid labeling, seal labeling, bottom labeling, etc.

Condition: as good as new (ex-display), Centrifugal pump Alfa-Laval FM-1A Material: stainless steel, medium: fruit concentrate/fruit juice, flow rate 20.000 l/h, delivery head approx. 25m, power approx. 3 kW, speed approx. 2.900 1/min, inlet/outlet Hsdpfxehryyhj Adweng DN50 1 VA-tank, vertical, cylindrical, closed 1 VA-subframe for pump and tank

Condition: used, D-6886-Delford Type SP 800 Delford SP800, Film wrapping machine, Packing materials: stretch films 12,5 – 25 micron (50-100 gauge) P.V.C. or any suitable heat sealable types. Max. roll with 450 mm, max. roll dia. 250 mm. Speed of operation: 40 – 80 packs per minute. Max. Packs sizes: L 300 mm, W 200 mm, H 120 mm, Girth 420 mm, Min. Packs sizes: L 130 mm, W 90 mm, H 10 mm, Girth 200 mm, Dimension: 5290 x 1049 x 1430. Machine weight: approx. 1400 kg. Hjdpfsc Nlxpjx Adwjng