Chiron MILL 800 5 axis milling turning - ms

Chiron MILL 800 5 axis milling turning - ms

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ... Laedegmi Unepfx Akmsh

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t Ljdpfx Aox Hn D Rokmeah spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning-milling center GILDEMEISTER GMX 400 linear with Y-axis and milling spindle Year of manufacture: 2003 Control system: Sinumerik Powerline Technical data: Drive power main spindle ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar diameter: 90 mm Number of magazine slots: 120 pcs. Tool holder for milling spindle: HSK 63 Drive power counter spindle ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar diameter: 90 mm B-axis / milling spindle: Drive power: Speed: Torque: Tool holder: HSK 63 Y-axis: +/- 110 B-axis: +/- 120° Lower turret: X-axis: Z-axis: Speed of driven tools: Number of turret slots: 12 pcs. Tool holder: VDI 40 Accessories: - Chip conveyor - High-pressure system with 20 bar - Preparation for 3D measuring probe - Tailstock function for counter spindle Laodowzbq Tepfx Akmsh - Automatic sliding doors

Condition: not inspected (used), Year of construction: 1996, empty load weight: 800 kg, diameter: 1.5 - 160 mm Laodpfswgm Sajx Akmoh stroke: 400 mm weight: 800 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, Punching force: 220 kN Sheet thickness: 8 mm Working area: 2535x1280 mm Sheet thickness for stainless steel: 4-6 mm Ljdpfxeyrcycj Akmjah Accessories: - Tool change cassettes - Table with ball rollers - Operating hours: 97,000

Condition: used, functionality: fully functional, Year of construction: 2001, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Laodpfx Aow Imq Rjkmsh

Condition: good (used), Distance between centers: 1000 mm Center height: 175 mm CNC brand: FANUC CNC model: Oi-TD Laedpfx Aketrgn Tjmjh

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2024 Control : Siemens 840 Dsl - Operate Speed : 15000 rpm Movement X/Y/Z : 800/800/550 mm Tool holder : HSK 63 In General: Year of manufacture:2024 Control system:Siemens 840 Dsl - Operate Travel ranges X/Y/Z:800/800/550 mm Rotational speed:15,000 rpm Tool holder:HSK 63 Spindle: RPM:15,000 Max. power:31 kW Max. torque:194 Nm Tool holder:HSK 63 Fluid supply:Blast air + coolant NC swivel table: A-axis:+/- 130° Drive:Tandem drive C-axis:360° Drive:Direct drive (torque motor) Clamping surface:800 x 630 mm Laedpfs Aa Hmxox Akmoh Max. table load:1,400 kg Tool magazin: Magazine I:Standard Number of stations:42 Magazine II:ZM 88 Number of stations:88 Tool changer:Pick-Up Max. tool diameter:80 (125) mm Max. tool length:350 mm Equipment: Position Sensors:Direct scales on all axes (glass scales) Chip Removal:Chip conveyor Coolant Supply:Internal coolant system, 80 bar Workpiece measurement:Touch probe Tool measurement:Laser Kinematics measurement:Automatic, Kinematics Opt Emulsion mist separator:Mechanical Machine accuracy I:Package I Increased accuracy in A and C axes:Yes Turning function:Interpolation turning S840

Condition: used, Year of construction: 2011, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2011 Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Subspindle: Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Ejector:Hydraulic with flush Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier II (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier III (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Lajdpfxjzr Dd Uj Akmsh Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter and Highpressure, 80 bar Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Rawmaterialfeed:Barlaoder, FMB SL 80S Finished part removal:Unloading device (NC-controlled) with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. used static Toolholder

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective. Laodpfx Asx Ew Dqjkmsh