Gubisch planer and moulder 172/7
S/N 3425 80
Year of manufacture 1980
length of the planing table 1950 mm
Gxigmk
planing width maximum 170 mm
planing height maximum 120 mm
Spindle diameter 40 mm
7 planing shafts :
1.bottom planing shaft 7,5 kW
2.right joining shaft 3,0 kW
3.left shaft 4,0 kW
4.right shaft 4,0 kW
5.Top Thickness Shaft 4.0 kW
6.Top Thickness Shaft 5.5 kW
6.Uni shaft top / bottom 3,0 kW
Voltage 380 V, 50 Hz
Power consumption 33.6 Kw
Feed motor 1,5 kW
Feed speed infinitely variabl...
- Hobelbreite 50 - 400 mm
- Hobelhöhe 10 - 300 mm
- stufenloser Vorschub 5-25 m/min.
- Spindel FI 50 mm
- Drehzahl 6000 U/min
- 6 Spindeln
- untere Welle min. / max. Werkzeug FI 160 /180 mm
- rechte Welle min. / max. Werkzeug FI 160 /230 mm
- linke Welle min. / max. Werkzeug FI 160 /230 mm
- obere Welle min. / max. Werkzeug FI 160 /230 mm
- 2. obere Welle min. / max. Werkzeug FI 160 /230 mm
- untere Welle min. / max. Werkzeug FI 160 /230 mm
-max. Sägeblattdurchmesser 2. obere Welle 3...
CATALOG NUMBER 6133
TECHNICAL DATA
- max width of the workpiece 220mm
- max height of the workpiece 130mm
5 spindles:
1) horizontal bottom 220mm 5.5kW
2) vertical right 130mm
3) vertical left 130mm; 2 and 3 11kW
4) horizontal top 220mm 5.5kW
5) horizontal bottom 220mm 11kW
- all adjustable spindles up / down, right / left
- diameter of the spindles 40mm
- from above, 4 introducing rollers, toothed, including 2 double ones
- from above, 1 pulling roller, rubber, double
- pressure on the insertion...
Beschreibung : Rückführung für Vierseitenhobelmaschine
- Werkstücklänge 200 - 1100 mm
- Werkstückbreite 20 - 150 mm
- Werkstückstärke 5 - 80 mm
- Bandlänge 3000 mm
- Bandbreite 250 mm
- Bandgeschwindigkeit 20 - 100 m / min.
9337dep
- Antriebsmotor 0,25 kW
- Pneumatischer Druck 6 bar
- E. - Anschluss 400 V / 50 Hz / 1,1 A
Lagerort: Nattheim
Slotted tables
6 stations
Super finish
380V
Bt7jgfbahl
used, cleaned, function checked,
Bn0dupqwoy
test run, greased,
Vorschubketten renewed and new adjusted,
spindle rotation:
2/100-0/100-1/100-0/100-2/100-1/100 mm
manufactured by Weinig
type U - 16 - K
built in 1975
Masch.-No. 570/799
number of spindles 6
spindle alignment:
u - right hand - left hand - o - u - right hand
motors:
4 - 3 - 5,5 - 5,5 - 3,0 - 5,5
planing width ca. 160 mm
planing height ca. 120 mm
table length ca. 2000 mm
pressure bar planer heads
table lubrication
feeder vor der surfa...
- max. Hobelbreite 180 mm
- max. Hobelhöhe 105 mm
- min. Hobelbreite 25 mm
- min. Hobelhöhe 10 mm
- Arbeitshöhe 920 mm
- min. Werkstücklänge bei Einzelelementen 350 mm
- min. Werkstücklänge bei Serie 250 mm
- Aufgabetischlänge 1700 mm
- Spindeldurchmesser 40 mm
- Durchmesser der Hobelköpfe 120 mm
- Länge horizontale Spindel 190 mm
- Länge vertikale Spindel 120 mm
Bhhehcv0qy
- Fügefalzfräser 140 x 10 x 40 mm
- Drehzahl 6000 Upm.
Spindelfolge:
1. unten horizontal 4,0 kW
2. rechte vertikal 4,...
CATALOG NUMBER 6134
TECHNICAL DATA
- max width of the workpiece 230mm
- max height of the workpiece 160mm
number of spindles 6
1) horizontal bottom 230mm 7.5kW
2) vertical right 160mm 7.5kW
3) vertical left 160mm - electrically adjustable front / rear from the 7.5kW control panel
4) horizontal upper 230mm with ATS 11kW
5) horizontal upper 230mm with ATS 11kW
6) horizontal bottom 230mm 11kW
- all spindles adjustable up / down, right left
- 1,2,3,5,6 spindles equipped with electric brakes
- diamet...
Anlage ist mit Einlauf - und Außlaufmechanisierung !!!
Brbo8grzuh
Vorschubgeschwindigkeit von : 6 m/min
Vorschubgeschwindigkeit bis : 60 m/min
max. Spanabnahme Abrichte : 10 mm
max. Arbeitsbreite : 260 mm
max. Arbeitshöhe : 160 mm
Spindelanzahl : 6 Stk
1. Spindel : unten
Spindeldurchmesser 50 mm
Aufspannlänge 260 mm
Drehzahl 6000 U/min
Motorstärke 7.5 KW
2. Spindel : rechts
Spindeldurchmesser 50 mm
Aufspannlänge 160 mm
Drehzahl.6000 U/min
Motorstärke 7.5 KW
3. Spindel : links
Spinde...
Opportunity in excellent condition
Btxrunk72o
Guilliet four-head KXY 180/120 mm
Leitz centrofix heads
Working width 15 – 230 mm
Working height 10 – 150 mm
Planing table 2.5 m long (including joint rule)
Insertion (min. working width 25 mm, chip removal on the dressing spindle max. 7 mm)
Spiral feed roller in the machine table in front of the first lower spindle (for wet wood).
Two driven rollers in the machine table, 210 mm
Spindle arrangement:
1. First lower 7.5 kW, 6000 rpm,
2. First rights 5.5 kW, 6000 rpm,
3. First left mobile spindle positioned electronically 5.5 kW, 6000 rpm,
Btw3ptmvip...
Number of spindles 7 St.
Working width 230 mm
Working height 120 mm
Length of the planing table 2000 mm
Feed motor 3 kW
Feed speed 5-24 m/min.
Dimensions (L/W/H) 5200 x 2000 x 1900 mm
weight of the machine ca. 4500 kg
# 2545 Weinig Unimat 23 E with ATS control for width and height,
divide out of glazing bead possible
.....
Technical data summary
Bklzrop0vx
(please inquire about additional accessories)
.....
Generally
.....
> Working width: 230 mm
> Working height: 120 mm
> Number of spindle...
- Hobelbreite 20 - 320 mm
- Hobelhöhe 8 - 230 mm
- stufenloser Vorschub 5 - 25 m/min.
- Spindel FI 50 mm
Dvjxmsmt
- Drehzahl 6000 U/min
- untere Welle min. /max. Werkzeug FI 110 / 145 mm
- rechte Welle min. /max. Werkzeug FI 110 / 200 mm
- linke Welle min. /max. Werkzeug FI 110 / 200 mm
- obere Welle min. /max. Werkzeug FI 110 / 200 mm
- 2. untere Welle min./max. Werkzeug FI 110 / 200 mm Spindelanordnung:
1. unten 11,0 kW
2. rechte vertikal 7,5 kW
3. linke vertikal 7,5 kW
4. oben 11...
CATALOG NUMBER 6135
TECHNICAL DATA
- max planing width 260mm
- max planing height 160mm
6 spindles:
1) horizontal bottom 260mm 5.5kW
2) vertical right 160mm 5.5kW
3) vertical left 160mm 7.4kW
Jwthqa
4) horizontal upper 260mm 11kW
5) horizontal bottom 260mm 11kW
6) universal 360 °, electrically adjustable up / down 11kW
- spindle diameter 5 - 50mm
- diameter of the remaining spindles 40mm
- all adjustable spindles up / down and right / left
- 8 drawing rollers in advance, including 4 double, 2 tr...
für Schlüsselweite 51 mm
Lagerort : Holztreppe Büro
Hr9xjvkxu
Lagerort: Nattheim
Weinig Hydromat H23
Machine number 023-2449
50mm spindles 6,000 RPM
Bottom 5,5kw
Bottom 11kw
Left 7,5kw
Right 7,5kw
Top 15kw
Bottom 15 kw
Bottom 11kw
Top 11kw
11kW hydraulic pump for feeding system 80m/min
6 powered bed rollers and 11 powered top rollers to help with feeding your wet timber.
Automatic lubrication system.
2x horizontal jointers.
Complete planing line for up to 6m long boards with infeed, outfeed, bundle collator, bundler and Paternoster stacker.
Pack infeed with 7 infeed c...
Speed: 0 - 60 m/min,
Heads: 7,
Planing dimensions: 100x200 mm,
Description: With electric box.
Planer Waco HM200 Universal.
2s0nfu
Weinig Unimat 30 EL
300 x 200 mm wide
Bottom-right-left-right-left-top-top-bottom
with outboard bearings on horizontal spindles
O8vxr
with chamfer unit
with jointer
short infeed table
ATS system, automatic positioning spindles 3,5,6,7
Driven rollers in table
option : complete with in- and outfield
- Hobelbreite 20 - 180 mm
- Hobelhöhe 8 - 100 mm
- Spindel FI 40 mm
- Drehzahl 6800 U/min
- Vorschubgeschwindigkeit stufenlos 8 - 33 m/min
- Abrichtwelle, unten max. Werkzeug FI 125 mm
- Rechte Vertikalwelle min. / max. Werkzeug FI 115 - 170 mm
- Linke Vertikalwelle min. / max. Werkzeug FI 115 - 170 mm
- Dickenwelle, oben min. / max. Werkzeug FI 105 - 150 mm
- Fügefalzfräser max. FI 152 mm
Spindelfolge
1. unten 4,0 kW
2. rechte vertikal 4,0 kW
3. linke vertikal 4,0 kW
4. oben 5,5 kW
- Moto...
Order No. 6127
TECHNICAL DATA
- max width of the workpiece 630mm
- max thickness of the workpiece 200mm
in advance:
- pawls
- pulling shaft, toothed
- clamps
- pulling shaft, toothed
- pressure
- toothed pulling shaft
- pressure
- 630mm planing shaft for 6 5.5kW knives
- pressure
Btxppslkih
- smooth pulling shaft
from down:
- smooth skid roller
- 630mm planing shaft for 6 4kW knives
- 2 smooth skid rollers 2 pcs
- adjustable rollers in the lower table top
- smooth regulation of the feed speed...
Number of spindles 9 St.
Working width 230 mm
Working height 140 mm
feed 4-40 m/min
weight of the machine ca. 6,8 t
Dimensions (L/W/H) 7270x1707x1800 mm
Spindle diameter 40 mm
! Machine in order for sale !
SCM Topset 23 Version 32U
Benqjguabs
Number of spindles: 9 pcs.
Reinforced motors: 7.5 instead of 5.5 kW
Spindle assembly:
Dressing spindle / 2 x right / 2 x left / 2 x upper / 1 lower u.
1 glass bead saw
8 + 9 Sp horizontally adjustable via axis control, 9 sp (on / off, up / down)
St...
Description:
Used Weining Unimat PFA22N, ready for inspection and immediate sale :).
Technical specifications
Year of manufacture 1972
Working width mm 220
Planing height mm 120
Number of spindles 5
Spindle configuration b-r-l-t-b
Spindle rotation speed max 1/min 6000
Infeed table length mm 2500
Feedrate max m/min 36
Type of feed roller drive Chain
Further technical details
Bottom spindles 2
Right spindles 1
Left spindles 1
Top spindles top 1
Btuklbkae2
Spindle diameter mm 40
Jcvuuhede
Seperate ...
Speed: 0 - 80 m/min,
Heads: 7,
Dimensions: 150 x 300 mm,
Cyn30jbx
Description: With electric box and hydraulic station.
Planer Jonsered H45B.
Complete planing line for up to 6m long boards with infeed, outfeed, bundle collator, bundler and Paternoster stacker.
Pack infeed with 7 infeed chains
Vacuum destacker with 6 vacuum pads
Infeed conveyor with single board feeder
Mouder infeed with 6 hyraulically driven feed rollers
Mv83oc
Hydraulic unit
Moulder outfeed with rollers, kickers and return.
Bundle collector / collator
Roller conveyor to bundling unit / strapping unit
Outfeed conveyor from bundling unit with return
Paternoster stac...
- Hobelbreite 20 - 330 mm
- Hobelhöhe 8 - 230 mm
- stufenloser Vorschub 5-25 m/min.
- Spindel FI 50 mm
- Drehzahl 6000 U/min
- untere Welle min. /max. Werkzeug FI 110 / 145 mm
- rechte Welle min. /max. Werkzeug FI 110 / 200 mm
- linke Welle min. /max. Werkzeug FI 110 / 200 mm
- obere Welle min. /max. Werkzeug FI 110 / 200 mm
- 2. obere Welle min./max. Werkzeug FI 110 / 200 mm
- untere Welle min. /max. Werkzeug FI 110 / 200 mm - 6 Spindeln
1. unten 11,0 kW
2. rechte vertikal 7,5 kW
3...
working width 170mm, working height 120mm, feed, incl. cabinet with accessories
Ib8xa3b
Four-side planer
WEINIG UNIPLAN WITH HYDRO HEADS
Year of production 1997
TECHNICAL PARAMETERS:
max width of the workpiece: 230mm
max height of the workpiece: 120mm
max tool diameter: 160mm
number of spindles: 2
heads on steady rests
adjustment of the heads up / down
Btyx3mx9xz
electric height adjustment of the upper head
lower head equipped with a brake
engine power: 2x5,5kW
feed motor: 3kW
max revolutions: 9000 rpm
smooth regulation of the feed speed: 6-36 m / min
feed on cardan shafts
– Machine in Stock
– San very good
– Year of manufacture 1994
Good condition
Technical Specifications:
– Planing Width 220 mm
– Planing Height 120 mm
– Tool diameter Max 160 mm
– Main motors 2 x 5.5 KW
– 3 KW Feed motor
– Feed Speed 6 – 36 m/min
– Five top Draw rollers
– Electric height adjustment
Machine Size:
– Length 210 cm
Wmtsdxqr
– Width 170 cm
– Height 180 cm
– Weight ~ 2000 kg
Speed: 0 - 80 m/min,
Heads: 6,
Dimensions: 150 x 300 mm,
Description: With electric box and hydraulic station.
Gopkrdjuq
Planer Jonsered H45KN.
Rhino 800XL four side moulder
with 6 Spindles
Cvrg2mka
bottom-right-left-top-top-bottom
Feed motor 7,5 KW with inverter 7-36 m/min
All 6 spindles 11.0 KW each with IE-3 energy efficient motors
Special 320 mm working width
50 mm spindles
Outboard bearings on all horizontal spindles
Motors and feed with brakes
Radial CNC controlled adjustment spindles 3 and 5
Infeed table 2 meter
Automatic table lubrication
Pneumatic chip breakers on top spindles
Pneumatic fence on left spindle
Central po...
Technische Daten: - Hobelbreite 20 - 230 mm
- Hobelhöhe 8 - 160 mm
- 5 Spindeln
Bhhegptpiw
- Spindel FI 40 mm
- Drehzahl 6000 U/min
- Vorschubgeschwindigkeit stufenlos 5 - 30 m/min
- Abrichtwelle, unten max. Werkzeug FI 145 mm
- Rechte Vertikalwelle max. Werkzeug FI 200 mm
- Linke Vertikalwelle max. Werkzeug FI 200 mm
- Dickenwelle, oben max. Werkzeug FI 200 mm
- 2. untere Welle max. Werkzeug FI 200 mm
Spindelfolge: 1. unten 7,5 kW
2. rechte vertikal 5,5 kW
3. linke vertikal 5,5 kW als Mobil...
- 7 heads
- max working height of 13cm
- max working width 23cm
- smooth feed regulation
- computer control with dedicated software
Btxad0xhmv
order of spindles:
- down
- right
- left
- Mountain
- Mountain
- down
- Universal
Four-side planer Weinig type Unimat 22 N,
spindles: 6,
spindle arrangement: bottom (4 kW) - right (3 kW) - left (4 kW) - right (4 kW) - top (5,5 kW) - bottom (4kW),
Bra8z3xa
mobile spindle,
working width: 220 mm, working height: 120 mm,
groove bed,
feed rate: max. 36 m/min.
Weinig Hydromat H23
Machine number 023-2449
Tlmgqikj
50mm spindles 6,000 RPM
Bottom 5,5kw
Bottom 11kw
Left 7,5kw
Right 7,5kw
Top 15kw
Bottom 15 kw
Bottom 11kw
Top 11kw
11kW hydraulic pump for feeding system 80m/min
6 powered bed rollers and 11 powered top rollers to help with feeding your wet timber.
Automatic lubrication system.
2x horizontal jointers.
Speed: 0 - 80 m/min,
Bt7vypuljr
Heads: 7,
Planing height: 100 mm,
Description: With electric box and hydraulic station.
Planer Waco HM200X.
Very fine condition - Spindels: b+r+l+r+t+b
B9tu0cf
4 x Tersa
- Hobelbreite 20 - 230 mm
- Hobelhöhe 20 - 200 mm
- Sägebreite 60 - 190 mm
- max. 5 Sägeblätter pro Sägewelle
- min. Sägedicke 5 mm
- 6 Spindeln
- Spindel Hobelwellen FI 40 mm
- Spindel Sägewellen FI 50 mm
- Drehzahl Hobelwellen 6000 U/min
- Drehzahl Sägewellen 6000 U/min
- Vorschubgeschwindigkeit stufenlos 5 - 30 m/min
- Abrichtwelle, unten max. Werkzeug FI 110 - 145 mm
- Rechte Vertikalwelle max. Werkzeug FI 110 - 200 mm
- Linke Vertikalwelle max. Werkzeug FI 110 - 200 mm
- Dickenwelle, oben m...
max. Arbeitsbreite : 220 mm
O0ycj
max. Arbeitshöhe : 120 mm
Spindelanzahl : 5 Stk
1. Spindel : unten
2. Spindel : rechts
3. Spindel : links
4. Spindel : oben
5. Spindel : unten
Motorbremsen : Ja
Elektrische Haubenverriegelung : Ja
Vorschubgeschwindigkeit stufenlos bis : 5-22 m/min
Vorschubleistung : 2,2 kW
Vorschubantrieb : Kardan
max. Spanabnahme Abrichte : 10 mm
for sale a weinig Quattromat 22, Four side planer.
Working width (with a tool diameter of 125 mm)220 mm
Working height (with a tool diameter of 125 mm)120 mm
the machine is in good condition,
Gb397yhoq
planer heads include and comes with some spare knife.
Inspection is welcome!
If you have any question feel free to contact us.
Year of manufacture 2007
MEMORY SYSTEM
Working width / height : 230 / 120 mm
5 spindle
Feed up to 30 / min
Wpp8qhsh
Machine is in our factory is available. Electrical presentation possible.
working width 180mm
working height 120mm
spindles diameter 40mm
spindles speed 6000 rpm
Type G18 / 4F. Planing width 180mm. 40mm spindles. Complete with cutters and accessories. Flexible machine that takes up little space. Can run at 16 amps. Perfect for planing boards and moldings. Comes from education.
Works perfect. One owner then new.
Cpjrigoc
We arrange shipping for all countries.
4 SIDED PLANER MIDA SPBF/4
- max. Planning width mm. 500
- max. Planning height mm. 310
- upper motor 30 kw
- bottom motor 30 kw
- each side motor 18 kw
- Feedrate max m/min 30
- motorized and digital 3rd spindle adjustment
- motorized and digital height adjustment
- with automatic chamfering
- extractor rollers
Bniys3uvqk
- CE rules year 2006
- digital read out
Technische Daten: - Hobelbreite 20 - 230 mm
- Hobelhöhe 8 - 160 mm
- minimal Werkstücklänge 700 mm (einzeln) / 400 mm (bei Serie)
- 5 Spindeln (4+1)
- Spindel FI 40 mm
- Drehzahl 6800 U/min
- Vorschubgeschwindigkeit stufenlos 8 - 33 m/min
- Abrichtwelle, unten Werkzeug FI 125 mm
- Rechte Vertikalwelle Werkzeug FI 108 - 200 mm
3lj8wou
- Linke Vertikalwelle Werkzeug FI 108 - 200 mm
- Dickenwelle, oben Werkzeug FI 108 - 200 mm
- Universalspindel Werkzeug FI 108 - 160 mm
Spindelfolge: 1. ...
I sell the fourside moulder SK Machinery KP4-230S
4 Spindles
Inverter adjustable feeding speed 8-30 m/min.
Total motor power 27,5kW
Good condition. Fully working!
Moulding heads included.
Mv8gco
Sellable immediately
CATTELAN heavy duty moulder, type KSA 320/S
Manufacture year 2000, CE
Planing width 20 – 300 mm
Planing height 15 – 310 mm (2-sides)
Planing height 15 – 130 mm (4-sides) can be modified up to 300 mm
Feed speed 10 – 60 m/min, motor power 7.5 kW
Spindle lay-out:
F8vb9wfry
1. Horizontal bottom spindle, motor power 15 kW
2. Horizontal top spindle, motor power 18.5 kW
3. Vertical right spindle, motor power 11 kW
4. Vertical left spindle, motor power 11 kW
## Chamfering unit, each 2.2 kW
5. ...
High MECH flat chain feeder with accelerator.
4kW Hydraulic unit.
60m/min accelerator speed.
18m/min flat chain feeder advance speed
4x feed rollers
Btpeprn9ek
260-3000mm board length
50-230mm width
20-80mm thickness
The machine has few operating hours
Bty9393lww
4-SIDE PLANER MOULDING MACHINE WEINIG UNIMAT 17 A
Technical specifications:
Working width: max 180 mm
Working height: 120mm
Motor power per spindle: 4 KW
Spindle speed: 6000 rpm
Diameter of the spindle: 40 mm
Gxuprml
Smallest tool diameter: 100mm
Max. tool diameter: 160mm
Max. diameter of the vertical spindles : 180mm
Max. tool diameter of the 2nd right spindle: 195mm
Max. tool diameter of the upper spindle: 200mm
Max. tool diameter of the lower spindle: 180mm
Feed speed variable: 6 - 18 m / min...
Technische Daten: - Hobelbreite 20 - 230 mm
- Hobelhöhe 8 - 160 mm
- minimal Werkstücklänge 840 mm (einzeln) / 280 mm (bei Serie)
- 5 Spindeln
- Spindel FI 40 mm
- Drehzahl 6800 U/min
- Vorschubgeschwindigkeit stufenlos 6 - 36 m/min
- Abrichtwelle, unten Werkzeug FI 125 mm
- Rechte Vertikalwelle Werkzeug FI 108 - 200 mm
- Linke Vertikalwelle Werkzeug FI 108 - 200 mm
- Dickenwelle, oben Werkzeug FI 108 - 180 mm
- 2. untere Welle Werkzeug FI 108 - 230 mm Spindelfolge: 1. unten horizontal...
This may be of interest to you
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
