Industrial static balancing machine

Cimat CMT30/STATIC

Condition: new, Year of construction: 2024, The Just Lift cranes, models JL250 to JL750, from Just Lift have been developed to accelerate and optimize all processes related to lifting and logistics, increase productivity, and at the same time ensure maximum safety and ergonomics for the operator. - Motorized drawbar head guidance - Arm control with remote controls - Hydraulic lifting and extension - Anti-tipping system as standard - 100% electric Max. forward travel speed km/h 4.0 Max. reverse travel speed km/h 4.0 Lifting system, max. load capacity kg 250 to 750 Number of operators 1 Arm lifting speed mm/s 22.00 Arm lowering speed mm/s 15.00 Arm extension speed mm/s 7.00 Arm retraction speed mm/s 5.00 System pressure bar 125.00 Oil type ISO VG 46 Oil volume l 2.00 Weight without batteries kg 610 to 1,080 Total weight incl. 105/130A AGM batteries kg 680 to 1,146 Length max mm 2,835 Length min mm 1,891 Width mm 980 Height, steering wheel/drawbar mm 1,229 Height max mm 3,030 Height min mm 2,313 Godpjh Tx R Tjfx Al Aeud Lifting height max mm 3,010 Wheelbase mm 1,000 Turning radius mm 1,050 Currently, we can only offer new equipment.

Year of construction: 2016, condition: new, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Gjdpfx Aegwlrdsl Ajud Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !!

Condition: new, Year of construction: 2025, Genie GR20 Runabout vertical mast work platform, new, used, demonstration machines available Guodpfx Alerh D R Ao Asd

Condition: new, functionality: fully functional, power: 5.7 kW (7.75 HP), gearing type: hydrostat, color: green, overall weight: 1,995 kg, lifting power: 2,820 kg/m, lifting height: 8,700 mm, tire size: Rubber tracks, tire condition: 100 %, Year of construction: 2021, operating hours: 2 h, Equipment: additional headlights, hydraulics, onboard computer, === KEY SPECIFICATIONS === Year of manufacture: 2021 Operating hours: 2 h Max. lifting capacity: 2,820 kg Max. lifting height: 8.7 m Jib reach: 8.205 m Godpfeyidbmsx Al Aoud Drive: Fully electric (lithium-ion battery) Remote control: Yes (wireless radio remote control) Jib: Included Attachments / extra equipment: Searcher hook, multi-position outriggers, programmable moment limiter Tyre type: Rubber tracks Track condition: Excellent / like new Weight: 1,995 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available Fully electric zero-emission spider crane Lithium-ion battery with fast charging Continuous operation while charging Compact and lightweight design Multi-position outriggers Wireless remote control Eco working modes === CONDITION === Excellent working condition (new) – fully inspected, serviced and tested by certified professionals. Inspection available upon request. === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable machines from first owner with full service history and professional technical support. Benefit from one of the largest European stocks of new and used machines. All machines are fully inspected, CE certified and ready for immediate use. Spare parts and professional assistance available upon request. === DELIVERY === Crane loading available on request for smooth transport during shipment. Flexible shipping options tailored to your destination and logistical preferences. All transports are professionally handled by the Collé Rental & Sales logistics team.

Condition: used, Year of construction: 2020, machine/vehicle number: 001646U en 001647U, For sale 2x used Demag single girder overhead cranes 13,325mm x 10,000 kg. These two cranes were installed together in one hall and feature tandem control. We can optionally supply the cranes including: * Installation and inspection * Power supply rails * Radio remote control * Master/master controls Jan Reiling B.V. also delivers new cranes fully customized at very competitive prices. * overhead cranes * suspension cranes * jib cranes * KBK rail cranes * boat lifts Gsdoya Ag Sopfx Al Aeud All our new and used cranes delivered with installation come with warranty! Additionally, we maintain our own stock of approx. 15,000 Demag spare parts. For more information, please visit the website of Jan Reiling B.V. Cranes, crane, overhead crane, workshop crane, warehouse crane, hoist, industrial cranes, universal crane, lifting equipment. Overhead crane, laufkrane, bridge crane. Single girder, einträger, single girder. Chain hoist, kettenzüge, chain hoists.

Condition: good (used), Pressure vessel Godsg A Hc Hopfx Al Asud 11 bar, 1500 Liter litre

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition. Guedewrm Dtspfx Al Asd

Year of construction: 2001, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 25,000-liter storage tank for storing water and wastewater, as follows: This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Includes manufacturer's certificate according to DIN standard and a type plate. The container is cleaned on the inside and insulated with bitumen on the outside. Suitable for both underground and above-ground storage. Container dimensions: Length: approx. 8,390 mm, Diameter: approx. 2,000 mm, Weight: approx. 4,500 kg Shape: cylindrical Equipment: optional For use as a fire water tank, a suction line with a type A quick-coupling connector according to DIN can be offered as an additional option. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees at our company. We also offer cost-effective delivery on request. Inspections of our systems are possible at any time. Additional tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you with our offer? If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you. Gedoc Nkyzjpfx Al Aeud General information: All offers are valid ex works Warstein, free of charge for loading. Delivery can be offered at a reasonable additional cost. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as an approved specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH241-14/433886, operating hours: 131 h, ABUS ELV crane system crane runway bridge crane indoor crane crane Guodpfox Ev Tkox Al Ajd Load capacity / lifting capacity: 5t - 5000 kg Gauge: 13,500 mm, overall width approx. 13,700 mm Year built: 1999, with floor control Lifting height: 6 m Overall height from crane top edge to hook approx. 1,020 mm (Girder: 540 mm + lifting gear: 480 mm) End carriage length with buffers approx. 270 cm SWP: Full load hours used: 131, theoretical remaining service life: 1,469 hours Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipment by freight forwarding possible, please inquire with postal code Collection preferred

Condition: excellent (used), functionality: fully functional, DEMAG Crane Overhead System KBKII-R crane system Workshop crane Overhead traveling crane Original price: over €40,000.00 Includes left-hand switch item no. 87396344 (alone, original net price €11,000.00) 6x 6m straight sections 2x 5m 4x 2m 3x 1.5m (Total of 60 running meters of straight rail with integrated, internal busbar – no festoon cable required!) 2x 90-degree curve KBKII-R Supplied with all necessary parts such as trolleys, suspension hangers, clamps, etc. Option: 4x DEMAG electric chain hoist PK5 N-F 500kg, 2 speeds (included with system but not binding), very good condition. System in inspected condition with inspection logbook, fully functional and ready to use immediately. Info: Over 20,000 DEMAG spare parts in stock! Please also check out my other available inventory offers! Gusdpfxov Uvdpe Al Ajd