Geothermal chiller

Climaveneta NECS-WQ 0804

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 4,500 mm, total width: 7,200 mm, total length: 8,500 mm, temperature: 35 °C, energy consumption: 300 kWh, Equipment: documentation/manual, For sale are three unused heat pump vacuum evaporators from Blue Water Plants, manufactured in 2020. The units were delivered for concentrate thickening at a biogas plant in southern France, were preserved at the factory, and have never been operated productively. The evaporators can be purchased individually or as a package. Scope of delivery: 1x Main evaporator, distillate output approx. 55 m³/day 2x Evaporator Type 12,000, distillate output each approx. 12 m³/day Total capacity in combination: up to approx. 79 m³/day Operating principle: The evaporators operate under vacuum at a low boiling temperature. An integrated heat pump recovers the evaporation heat, which is why the energy requirement is significantly lower than with conventional thermal evaporation. The wastewater is separated into two streams: a distillate with low residual load and a thickened concentrate with a greatly reduced volume. An integrated acid reaction binds ammonia as an ammonium sulfate solution. This solution can be used as a liquid nitrogen fertilizer. Typical applications: Biogas plants: Treatment of fermentation residue and digestate, recovery of nitrogen as ammonium sulfate fertilizer, reduction of storage and application volume Composting and waste treatment plants: Thickening of leachate from storage areas and composting processes Agriculture: Volume reduction of slurry and storage basin water, nutrient recovery Food and beverage industry: Thickening of organically contaminated process wastewater, for example from dairies, breweries or juice and vegetable processing Concentrate treatment: Further thickening of concentrates from reverse osmosis or membrane filtration with organic and nitrogenous loads Reduce disposal costs: Instead of disposing of the entire wastewater externally, only the thickened concentrate is now disposed of. The distillate can be reused or discharged after further treatment. Not suitable for: The evaporators are designed for organically and ammonium-contaminated wastewater. They are not intended for saline water such as seawater, brine, drilling fluids, reservoir water or heavily chloride-contaminated industrial wastewater. High salt and chloride loads lead to crystallization and scale formation on the heat exchanger surfaces and increase the risk of corrosion. For such applications, RIEFILT offers suitable alternatives on request. Note on distillate quality: Depending on the inflow, the distillate may contain residual levels of ammonium and COD. For discharge or reuse, RIEFILT offers suitable post-treatment via reverse osmosis. Peripherals (optional): Acid module 20 m³ (H2SO4), pH reactors, adiabatic cooling tower 47 m³/h Documentation: Process flow diagram incl. tank, pump and dosing list, technical documents and CE conformity declarations. Photos available on request. Bedpfx Aoyr H Ansndodi Conditions: Sale exclusively through RIEFILT GmbH. EXW South France, FCA/DAP on request. Inspection by appointment. Price on request.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: D91402707010001/2013, overall weight: 1,500 kg, Electric motor for sale For description, see nameplate and pictures Sale only within EU member states! Not a private sale Bjdswittpjpfx Andodi The MAE is available for inspection. We accept no liability for any warranty claims. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C. Bdedpfx Anorzq Aredji

Condition: used, Plant from spiral freezer. Bdedpfxjvvm Afo Andei

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 350 kW (475.87 HP), type of input current: three-phase, overall weight: 1,930 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,600 mm, total height: 2,000 mm, AMMONIA CHILLER GEA GRASSO 350 KW Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Bsdpfx Anjim R A Ijdedi Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2022, condition: as good as new (ex-display), Air handling unit with EC technology for hall climate control or heating, cooling capacity in conjunction with a chiller system of 150 kW at 7/12°C, heating capacity 300 kW, air flow rate 20,000 m³/h, 4 x 500 mm air outlets, compact design. Bdjdpfxjfzrgye Andji

Condition: like new (used), Year of construction: 2015, operating hours: 12,500 h, machine/vehicle number: EWADC22C-XS003, cooling capacity: 2,000 kW (2,719.24 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 46 °C, ambient temperature (min.): 35 °C, TECHNICAL SPECIFICATIONS • Brand: Daikin | Model: EWADC22C-XS003 • Product type: Air-cooled screw chiller • Year of construction: 2015 • Condition: Used • Operating hours: 13,000 – 14,000 h (as declared, not verified) • Cooling capacity: 2,002 kW (Daikin catalog value) | 1,933 kW (2014 selection document) • Cooling capacity (kcal/h): approx. 1,721,700 kcal/h (2,002 kW) | approx. 1,662,400 kcal/h (1,933 kW) • Efficiency (2014 selection document): EER 2.63 | ESEER 4.02 | IPLV 4.47 • Rating conditions: 12/7 °C water | 35 °C ambient • Evaporator: Shell & tube (direct expansion) | water volume 850 l | max. water-side pressure 10 bar • Nominal water flow: 92.2 l/s • Water inlet / outlet: 12.0 °C / 7.0 °C • Water connection: 273 mm • Insulation: Closed cell • Condenser: Aluminium fins | internally grooved copper tubes • Fans: 30 pcs | Ø800 mm | propeller type, glass-fibre reinforced resin | 900 rpm • Fan motor power: 52.5 kW • Nominal air flow: 160,327 l/s • Compressor: 3 x HSA2690524 | asymmetric single screw, semi-hermetic • Oil charge: 75 l • Capacity control: Stepless 25% – 100% • Start method: Star-delta (Y-Δ) • Refrigerant: R-134a | 360 kg | 3 circuits • Power supply: 400 V | 3 phase | 50 Hz | tolerance 10% • Nominal running current: 1,100 A • Max. starting current: 1,486 A • Max. current for wire sizing: 1,608 A • Control panel: MicroTech III • Remote monitoring: Modbus RTU | BACnet/IP | LonWorks | TCP/IP • Temperature regulation accuracy: 0.1 °C • Protections: High/low pressure | oil pressure | motor temperature | freeze | phase monitoring • Sound power: 104 dB(A) • Sound pressure: 81 dB(A) at 1 m • Dimensions: Length 14,785 | width 2,285 | height 2,540 mm • Weight: 12,600 kg (unit) | 13,470 kg (operating) DESCRIPTION Offered with the assurance of Özsayın Soğutma, active in industrial refrigeration since 1982. The unit offered is a Daikin EWADC22C-XS003 air-cooled screw chiller. Current Daikin catalog value for this model is 2,002 kW; the 2014 selection document of the unit states 1,933 kW (12/7 °C water, 35 °C ambient). Designed for large plants with continuous cooling demand. DEVICE CONDITION • Condition: Used • Ready for sale • Condition details and available documents are shared at the quotation stage Bodpfxjuma The Andodi TECHNICAL ADVANTAGES • 2,000 kW class cooling capacity • 3 independent refrigerant circuits | 3 screw compressors • Stepless capacity control 25% – 100% • MicroTech III control with BMS connectivity • R-134a refrigerant APPLICATION AREAS • Industrial process cooling • Plastic injection and extrusion lines • Food processing and cold storage • Chemical and process plants • Office and commercial buildings (comfort cooling) OZSAYIN DIFFERENCE At Özsayın Soğutma we offer complete solutions, not only equipment sales: • Chiller sales and rental • Overhaul and remanufacturing services • Compressor maintenance and overhaul • On-site service and technical support • Spare parts supply • Project and engineering support SALES & TRUST • Ready for sale • Technical details are shared at the quotation stage • Commissioning support available DELIVERY & PROCESS • Shipment across Türkiye • Export and customs process support • Delivery time and scope stated in the quotation

Condition: not inspected (used), Various chillers and condensers/liquefiers from bottling plant, dismantled, for sale, among others: 10 cooling plants, make Hafner + Muschler, complete on frames, each with 2 compressors, incl. electrical- and control cabinet, refrigerant R134a, power consumption: 150 kW / 198 kW / 238 kW, years of construction 2002 - 2008, dimensions each approx. 3,100mm x 1,600mm Bedeh Nq E Sopfx Andodi 3 condensers/liquefiers, make Thermofin, each with 4 fans, years of construction 2006/2008/2016, dimensions each: 4,200mm x 2,300mm 4 condensers/liquefiers, make Güntner, each with 8 fans with 890 rpm, 246.7 lt volume, 32 bar, year 2002/2016, dimensions: 6,150mm x 2,300mm 2 condensers/liquefiers, make Güntner, each with 6 fans, 93 lt. content, 28 bar, year 2002, dimensions: 6,050mm x 2,400mm

Condition: refurbished (used), Our Pfeiffer Vacuum Okta 6000 Roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances Bdedpfx Anjfq D H Sedei be fitted with new wear parts be available at short notice included one-year warranty

Condition: excellent (used), Rotary lobe pump (Roots blower) Manufacturer: Pfeiffer Type: Okta WKP 2000 A M Bedpediwccjfx Andodi Suction capacity: approx. 2065 m³/h Warranty period: 12 months