Trolley for carriage of sashes and frame

COMALL CARR 900-93/15 Q

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. Nwsdpfx Ajyfgrpsb Ujl The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 114550, working width: 230 mm, planing height: 120 mm, number of spindles: 6, Planer and moulder Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control and the proven PowerLock quick-change system, and also features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Worktable: 2.5 m (including straightening fence) Top pressure rollers, spring-loaded Lateral pressure, pneumatic Frequency-controlled feed with brake, feed speed: 5 – 30 m/min Reduced feed roller distance between pendulum holders (400 mm) Additional feed rollers and shortened roller spacing Durofer steel roller, self-cleaning Infeed roller in front of the 1st bottom tool, pneumatic Siemens/Powercom control The machine is in a very good, well-maintained condition, has been professionally operated and regularly serviced, and will remain in operation until 17.12.2026. Inspection of the running machine is possible anytime by appointment. Nedpfxsx Sxfvo Ab Ujwl The price includes the tools for all 6 spindles. Dismantling and loading will be invoiced separately to the buyer. The technical description and the machine layout can be found in the documents.

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Nsdpfow Iddzsx Ab Uowl Max. forward feed speed: 25 m/min Operator shafts number: 6

Condition: new, Ruchser Glass bead nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping ----- Pictures show Clamp corner joining machine 2P inlcuding the option of movable work table (please find details as follows under additional prices) Additional prices: ----- Movable work table Nedpfxevnh T Ne Ab Uowl height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop device. ----- Additional price: 1.311,00 euros net Brackets: packages 15 mm brackets (package of 2000): Price 22.00 euros 12 mm brackets (package of 3000 pieces): Price 32.00 euros 10 mm staples (package of 3000 pieces): Price 32.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!)

Condition: used, Year of construction: 2005, power: 7.5 kW (10.20 HP), cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,500 kg, Equipment: CE marking, No. 04528 Sliding table saw Martin T 73 BASIC Used, year of construction 2005 Nedpfx Aboyymtdo Uewl Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Circular saw ruler can be lowered Pneumatic saw shaft lock Cross table with fixed angle adjustment Length stop extendable up to 3300 mm Sliding table with stepless locking Integrated contact for controlling the dust extraction system Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Nsdpfxjyy A Iqe Ab Uswl Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Year of construction: 2016, condition: used, Manufacturer: Emmegi S.p.A. Machine: PVC Corner Cleaning Machine Model: Trimmer E Year of manufacture: 2016 CNC corner cleaning machine for PVC frame corners, with 3 interpolated axes and automatic cycle. It is equipped with a 300 mm diameter blade that allows, through different machining programs, the cleaning of the external corner of various profiles. Nwodpfx Aboywu A Ij Uel Weight: 600 kg Air pressure: 6 – 7 bar Motor: E48 63/2 Speed: 2850 1/min Power: 3.5 kW Current: 6 A Power supply: 400/3 V Frequency: 50 Hz

Condition: new, Year of construction: 2024, Automatic length measuring and positioning system for all STROMAB crosscut saws, as well as similar machines from other manufacturers. It serves both as a stop and for workpiece positioning. Consists of: Aluminium profile 105 x 90 mm, anodized Toothed belt drive 32 mm, reinforced with steel wire Stepper motor 6 Nm, multi-voltage 115 - 230 V, 50/60 Hz Repeatability +/- 0.1 mm Positioning speed 60 m/min Nwodpfsxraucsx Ab Usl SMART 7 Control Unit with 7-inch touch screen Absolute and incremental processing mode 8 pre-set standard values 2 software versions with different optimization levels available optionally. ZM 415 – Usable working length 4,500 mm ZA333 – Roller table 4,500 x 280 mm, RD 32 mm ZA341 – Front support 4,500 x 260 mm ZA373 – Locking cable for customer’s own crosscut saw

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Njdpfou R Syijx Ab Uswl Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: used, Year of construction: 2010, functionality: fully functional, BOTTERO CUTTING LINE BOTTERO 545 VSXE-46 - Year 2010 Max dimensions: 4600 x 3210 mm Min dimensions: 150 x 125 mm Thickness: - Monolithic: 3-8 mm - Laminated (2 + 2) – (8 + 8) + BOTTERO 101 BLC-J – Year 2010 Jumbo Loading table Njdpfey E I A Rox Ab Uowl Tilting function