CNC Lathe 560x1500 Hydr. Chuck Tailstock

CORMAK CNC CKT 560x1500 Hydraulic

Condition: like new (used), Year of construction: 2018, operating hours: 14,000 h, functionality: fully functional, Technical data: - Capacity: 54,000 bph on 250 ml - Formats: 250 ml / 500 ml / 1,000 ml / 1,500 ml - Filling product: Water and non-carbonated beverages - Blowing/Filling/Capping: COMBI - Closure system: 26.7 mm plastic screw caps Equipment included: - Krones Preform Contifeed Orienter Feeder - Krones 24-cavity Blow Molder, model Contiform 324 Pro - High pressure air compressors, low pressure and high pressure booster - Krones 88-valve Volumetric Bottle Filler, Modufill PET with 33-head capper set for 26.7 mm Dusdpfx Agjxvda Do Rel - Krones model Capcade, cap hopper – cap feeder for flat caps - Fogg model 756-5-5-12-U-19, cap hopper – cap feeder for sports caps - Krones Checkmat Inspection System - Krones Linadry Air Knife System - Two (2) Krones Contiroll 8100 Hot Glue Wrap-Around Roll Feed Labelers - Two (2) Krones Checkmat Inspection Systems, post-label - Markem-Imaje Coder SLC350 - Krones stainless full-bottle conveyor and controls - Krones full case conveyor from packer discharge to palletizer infeed - Krones Robobox Case Orienter - Krones Modulpal Case Palletiser - Krones Palco full pallet discharge roller conveyor from palletizer to wrapper - Wulftec pallet wrapper with infeed and discharge pallet conveyor, model WCRT-200 - Ingersoll-Rand low pressure compressor (plant air), model IRN100N-OF (VSD) - Ingersoll-Rand low pressure receiver tank and air dryer - Atlas-Copco low pressure model ZR315VSDFF (paired with HPC-001) - Atlas-Copco high pressure air compressor booster - Manchester high pressure receiver, model 303724–600 gal *All equipment has already been dismantled and was serviced by Krones technicians The line is ready for shipment Installation and commissioning can be included in the offer

Year of construction: 1985, condition: good (used), COMPLETE COATING LINE WITH THE FOLLOWING POSITIONS: 1 HYDROPRIMER SPREADER 2 OVEN WITH UV LAMPS + IR 3 DOUBLE COATER WITH REVERCE Djdpfxsk Scufe Ag Rsul 4 UV LAMPS 5 DOUBLE COATER 6 UV LAMPS 7 DMC SANDER 8 CONVEYOR 9 COATING MACHINE TOUCH-UP DYE SORBINI 10 IR LAMPS 11 FINISHING ROLLER 12 UV LAMPS 13 EXIT CONVEYOR

Year of construction: 1983, condition: refurbished (used), Baader 185 file + skin machine for whitefish is suitable for large & medium-sized cod, Haddock, Gråsej, Merluza etc. Capacity 24-32 fish / minute, Year mod 1983. Dujdpsifpz Iefx Ag Rjl Dimensions 690 x 185 cm H 180 cm.

Year of construction: 2004, condition: used, Max. operating temperature: 1270°C, roller dimensions: 45x35x2350mm, roller distance: 60mm, min. format: 150x150mm, working width: 1200mm, length: 80.000mm, including documentation. Duodpeh Dbrhjfx Ag Rel

Condition: used, Surface grinding machine BLOHM type HFS 6 make no.: 10493 year of construction 1973 Electro magnetic clamping plate 600 x 300 mm grinding length 600 mm grinding width 400 mm table longitudinal movement max. 650 mm transversal movement 350 mm distance spindle center - table surface max. 600 mm distance spindle center - magnetic plate max. 517 mm Clamping surface table 1020 x 300 mm grinding wheel diameter 300 mm grinding wheel width 50 mm grinding wheel bore 76 mm table longitudinal feed 2-30 m/min infinitely variable table cross feed 2-65 mm stepless electric cross feed 3 m/min vertical feed 0,001 - 0,020 mm per infeed pulse vertical feed 0,250 m/min grinding wheel speed 1400 / 2800 rpm. Motor power hydraulic pump 2,2 kW Dodped Hbafofx Ag Reul Motor power grinding spindle 5 / 6 kW Mains connection 380 Volt, 50 Hz. Total power 11 kW - automatic depth adjustment - hydraulic longitudinal table movement - grinding wheel dresser on the headstock - electromagnetic plate height 83 mm - coolant system adjacent, with magnetic filter in filter housing - grinding spindle circulating lubrication - adjacent control cabinet (800 x 500 mm) - swiveling control panel - operating instructions and spare parts manual space requirement L x W x H 3000 x 2200 x 2100 mm weight surface grinding machine 3000 kg weight switch cabinet 200 kg good condition

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas Dusdpfx Agsvyli Ee Rel turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders: 5x axiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted. Complete battery exchange on 22.12.2025

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine xH: 3,0 x 2,0 x 2,1 m Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Djdpfx Asu Ixwieg Rjul Machine lighting Accessories: 1x driven tool i.D. *

Condition: ready for operation (used), Year of construction: 2017, An Agfa UV-LED hybrid large format printer including a roll-to-roll unit is available. Printing technology: UN-LED inkjet, max. print width: 2540mm, resolution: 1200dpi, print colors: CMYKLcLm+white+primer, max. print speed: 275m²/h, substrate type: rigid/flexible, max. substrate thickness: 50mm. Documentation available. On-site inspection is possible. Dusdpfxsww Iu Rj Ag Rjl

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, Fully overhauled Dsdperiui Tsfx Ag Rsul

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 240 mm, overall weight: 6,000 kg, spindle speed (max.): 42,000 rpm, 5-axis HSC milling machine Röders RXP500DSC with linear direct drives in all axes and torque drives in the rotary axes. Travels: X450mm, Y400mm, Z240mm Spindle / table distance: approx. 315mm - Linear direct drives in all axes - wear-free Specification: - Tool changer places: 19 - Cooling unit for drives, motors, spindle and cable cabinet - Measuring laser for the fully automatic measuring of milling tools (length / diameter / contour / cone angle) as well as wear monitoring including tool cleaning before measuring - Handbox - Remote maintenance - Automatic 3D probe including calibration ball in the tool changer - Minimal quantity lubrication - emulsion cooling - Spindle HSK40E with max. 42.000 rpm - Spindle compensation - Zero point clamping system Erowa integrated in the machine table - manual operating of chuck clamping - Automation package for retrofitting the machine with a pallet changer - Handbox Dodpstt Argjfx Ag Roul The machine is overhauled in our house and is now in almost new condition. The machine can be inspected and tested under power after completion at our site. Please make an appointment with us!