Vertical machining center

DahLih VMC 1020 4 axis divisior Fanuc

Condition: excellent (used), Year of construction: 2003, Available directly from the tool shop Vertical machining center Make: DMG Model. DMC 104 V Linear Year of manufacture 2003 CNC Siemens 810 D Powerline Spindle hours 18,200 (July 2024) Table area 1,250 x 600 mm X-axis travel 1,000 mm Y-axis travel 600 mm Z-axis travel 500 mm Tool holder SK 40 Spindle speeds 1 - 12,000 rpm Drive 13/19 kW at 100/40% duty cycle 30-station tool changer Equipment: Tjdet I Di Aepfx Ab Isf Linear drive on the X-axis Bed flushing system Spiral chip conveyor Direct position measuring system Drill breakage detection via laser Temperature compensation of the Z-axis via temperature sensor including active cooling unit Internal coolant supply through the spindle External air blown through 2 Pipes 700-liter coolant system, paper belt filter system with 40 bar high-pressure system Visiport viewing window on the operator door Additional machine door on the left side Bader cooling unit on the control cabinet Prepared for connecting a 4th axis with a Siemens 1FT 6064.1AF71-4AG1 drive motor and an indirect measuring system with 0.5 bar sealing air

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. 10.000 rpm Tedpfxjwk Nm Io Ab Isf

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Max. machining length : 320 [mm] - Spindle speeds : 8.000 [rpm] - Spindle power : 3.7 / 5.5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 8.000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 4 - Live tools speed : 6.000 (T01-T02-T03) / 4000 (T04) [rpm] - Live tools power : 1 [kW] - X/Y stroke : 142 / 348 [mm] GUIDE BUSH HOLDER 2 - Number of positions : 3 GUIDE BUSH HOLDER WITH AXIS B - Number of positions : 8 - Number of motorized positions : 4 Tjdpfx Ajwdalnjb Iof - Live tools speed : 5.000 [rpm] - Live tools power : 1 [kW] - Stroke axis B : 0 - 135 [°] SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6.000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 2 - Number of motorized positions : 2 - Live tools speed : 8000 [rpm] - Live tools power : 1 [kW] POWER SUPPLY - Total installed power : 21 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.150 x 1.280 [mm] - Machine height : 2.010 [mm] - Machine weight : 3.600 [kg] MACHINE HOURS - Number of hours under power : 37855 [h] - Number of working hours : 9578 [h] EQUIPMENT - CNC : Fanuc 31i-B5 - Interface : RS232 / PCMCIA / RJ45 / USB - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : MULLER COMBILOOP CL2 * with high-pressure pump : 100 [bars] - Bar loader : IEMCA BOSS 338 HD / 32 LL - Electric transformer

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,400 mm, spindle diameter: 100 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, The machine is in good technical condition, currently disconnected. Heidenhain TNC 530i control system, chip conveyor, tool magazine 40 pcs. Tedpfx Ajv Upbnjb Isf

Condition: good (used), Year of construction: 2009, functionality: fully functional, We offer: Universal Machining Center Manufacturer: Deckel Maho Type: DMC 80 U Year of manufacture: 2009 Control: Heidenhain MillPlus Technical specifications: X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm C-axis: 360° A-axis: -25° / +120° Max. spindle speed: 10,000 rpm Table size: 630 x 630 mm Max. table load: 800 kg Center bore: ⌀ 50 mm Tool holder: SK40 Tool changer: 180 positions Feed rate (x/y/z): 0 - 60,000 mm/min Tjdpfovx Tmcsx Ab Ijf Rapid traverse (x/y/z): 60 m/min Operating hours: approx. 75,463 h Spindle hours: approx. 22,122 h Technical features: - Internal cooling Accessories: - Chip conveyor - Measuring probe Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Heidenhain TNC 640, total height: 29,620 mm, total length: 32,000 mm, total width: 28,480 mm, table load: 200 kg, rotary table diameter: 380 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 36 bar, Equipment: chip conveyor, documentation/manual, Victor 5-Axis Machining Center VC-AX380 with Heidenhain TNC640 Control 5-axis simultaneous machining incl. calibration tool KinematicsOpt incl. calibration ball. Standard options: -Cooling system with high-pressure coolant pump MTH4-40/4 and supply hoses -Full protection coolant cabin -Spindle oil cooler -Oil separator Tjdpfx Absq Tafxe Iof -Spiral chip conveyor -Rinsing gun and air gun -Operating tools and manuals Additional options: -Air through the spindle -Air conditioning unit in the control cabinet -Chip conveyor -40 tools -36 bar ICS with Mahle Duplex -Table rinsing -Workpiece measurement TS460 -Automatic door -Interface -8" 3-jaw chuck Images are exemplary and may differ. From stock Bergneustadt (subject to prior sale)

Year of construction: 2002, condition: like new (used), machine/vehicle number: 16.34.02, 6 Die 6 Blow Header MULTIPRESS MP610LS Tsdpsh Tkrajfx Ab Ijf Maximum Cutoff diam. (500/Nmm2): 12 mm Max. Cutoff length : 105 mm Max. KO length (die side): 80 mm Max. PKO length: 23 mm Max. Speed: 180 ppm

Condition: good (used), Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, Tedewnfzcspfx Ab Ief 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Travel X/Y/Z: 600/450/450 mm Todowhrfzopfx Ab Ijf Spindle speed 10,000 rpm Tool magazine for 30 tools, SK 40

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm Tsdjwbvhaopfx Ab Iof --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg