Used Hurco Vmx 60 Sr for sale (156)

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 36.5 [kW] - Spindle speeds : 12000 [rpm] - B Rotary Axis : 90 [°] (+/-) LINEAR AXES - Travels on X/Y/Z axes : 1525 / 660 / 610 [mm] - Rapid traverses rates (X/Y/Z) : 32 / 32 / 24 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1680 x 660 [mm] - Distance table / spindle nose (min./max.) : 12.7 - 622.3 [mm] - Maximum weight upon table : 1360 [kg] - Diameter of the C-type rotary table : 600 [mm] - Travel : 360 [°] - Maximum load on the rotary table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 69 [kVA] WEIGHT & DIMENSIONS - Machine weight : 9.800 [kg] EQUIPMENT - CNC : WinMax / MAX5 - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor Bjdoy Tzc Hepfx Amneli - Spindle cooling unit - Tool probe

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1,525 x 660 x 610mm, Table 1675 x 660mm, table load 2,000 kgs, Bedpfx Ajzh I Ebsmnsli Spindle speed 12,000 rpm, input 18Kw, Hurco Winmax 5Control, Spindle taper Din 40, 30 ATC, Coolant, Low volt light, Swarf Conveyor, spindle probe

Condition: ready for operation (used), Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible. Bedpfsy Tx Nqex Amnjli

Condition: good (used), Year of construction: 2011, HURCO CNC machining center VMX 60 t X-axis 1,500 mm Y-axis 660 mm Z-axis 600 mm Table size 1,680 x 660 mm Spindle speed 12,000 rpm Tool holder SK40 Tool changer, 24 positions Equipped with WinMax control Includes: Internal coolant system (IKZ) Spindle cooler Coolant spray gun Chip splash guard cabin Signal light for machine operating status Flushing system to assist with chip removal Machine lamp Set of machine leveling pads Machine manual on CD Blsdpfexvtfpex Amnoi 2 color screens (text + graphics) Simulation graphics Tool and material library Detachable electronic handwheel Pocket milling with islands Synchronous tapping (thread cutting without compensating chuck)

Condition: good (used), Year of construction: 2011, functionality: fully functional, Travel X-axis approx.: 1,524 mm Travel Y-axis approx.: 660 mm Travel Z-axis approx.: 610 mm Table size approx.: 1,676 x 660 mm Table load approx.: 1,500 kg Tool changer: 24 positions Bodpfx Amoy R A Swoneli Tool holder: SK 40 Spindle speed: 12,000 rpm ICS 20 bar 3D probe: Renishaw Network interface Electronic handwheel Pocket milling with islands Synchronous tapping DXF software Scraper belt conveyor * Spindle hours approx. 1,937 (spindle replacement 2019) * Approx. single-shift operation

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table width: 660 mm, table length: 1,670 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This HURCO VMX 60 Vertical Machining center was manufactured in the year 2008. It is equipped with a MAX control unit and has 3 axis. The machine has a spindle speed of 10000 rpm. Machine Benefits Qualitative Machine Benefits • Good condition Technical Machine Benefits Blsdpfxsyi Ekxo Amnoi • Tool turret 24 positions • Equipment various tools • Accessories chip evacuator

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Hurco VMX 60 was manufactured in 2008. A vertical machining center featuring a MAX Control system, it offers X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 610 mm. It includes a spindle speed of 10,000 rpm, a BT40 spindle taper, and a 24-position tool turret. Consider the opportunity to buy this Hurco VMX 60 vertical machining center. Contact us for more information about this machine. • Table size: 1,670 x 660 mm • Tool turret: 24 positions Bsdoygmtvspfx Amnsli Additional equipment • Various tools • Chip evacuator Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, number of slots in tool magazine: 40, controller manufacturer: Hurco, total height: 3,298 mm, total length: 5,662 mm, total width: 3,921 mm, overall weight: 10,900 kg, table length: 1,676 mm, table width: 660 mm, controller model: MAX5, torque: 118 Nm, distance table center to spindle nose: 622 mm, spindle motor power: 36,500 W, number of spindles: 1, rapid traverse Z-axis: 2 m/min, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rotary table diameter: 600 mm, rotational speed (max.): 100 rpm, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 1,360 kg, tool diameter: 75 mm, tool length: 249 mm, tool weight: 7 g, Equipment: CE marking, chip conveyor, 🔹 For Sale: 2016 Hurco VMX60SRTi 5-Axis CNC Machining Centre – Excellent Condition🔹 Make: Hurco Model: VMX60SRTi Year: 2016 Machine Type: 5-Axis CNC Machining Centre Condition: Excellent Control System: Hurco WinMax with Touchscreen Location: Ireland 📌 Machine Overview: Available now is a Hurco VMX60SRTi 5-Axis CNC Machining Centre in excellent condition, fitted with high-performance features and Hurco’s flexible swivel-head + rotary table configuration. This 2016 model delivers outstanding part accessibility, powerful milling capability, and robust software for advanced 5-axis work. The large table space supports both full 5-axis and standard 3-axis machining, offering maximum operational flexibility for tooling, mold-making, aerospace, and general precision engineering. ✅ Key Features & Included Options: Touchscreen display with shaded 3D graphics (real-time) 2GB RAM | 120GB SSD | USB ports Ultimotion high-speed software (profiling & data smoothing) S-Curve Acceleration & Look-Ahead Finish Control Coolant Through Spindle (CTS) NC4 Laser Tool Probe Renishaw RMP60 Part Probe Software Add-ons: Mould Maker Suite (3D Swept Surface, Helical Entry, Rest Machining) DXF Import, Ultipocket, Adaptipath Ultimonitor + Ultinet (Networking/Remote Diagnostics) Conversational/NC Merge Swivel B Axis & C Axis Rotary Table Conversational or G-code Programming flexibility 🔧 Technical Specifications: Table Size: 1676 x 660 mm Rotary Table Diameter: 600 mm Max Load (Flat Table): 1360 kg Max Load (Rotary Table): 500 kg X Travel: 1524 mm Y Travel: 660 mm Bedpfx Amsuyt U Tjnsli Z Travel: 610 mm B Axis Tilt: ±92° C Axis Rotation: 360° Spindle Nose to Table: 13–622 mm Spindle Speed: 12,000 rpm Spindle Taper: BT40 Spindle Power: 36.5 kW Spindle Torque: 118 Nm - 2,900 rpm Tool Changer: 40 Tools Max Tool Diameter: 75 mm Max Tool Length: 249 mm Max Tool Weight: 7 kg Rapid Traverse Rates: X/Y: 32 m/min | Z: 24 m/min Rotary Table Speed: 100 rpm Power Requirement: 70 kVA Machine Dimensions (LxW): 5662 x 3921 mm Height: 3298 mm Machine Weight: 10,900 kg 📈 Ideal For: Aerospace & Defence Components Mould & Die Work Complex 3D Surface Milling Multi-Side Machining in One Setup High-Precision Part Manufacturing Hurco VMX60SRTi for Sale 5 Axis CNC Machining Centre Used Hurco CNC Machine Hurco 5 Axis CNC Ireland CNC Machining Centre with Rotary Table Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), Bljdpfozh Nczex Amnoi 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 2,050 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table load: 1,000 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Hurco VMX 42SR was manufactured in 2012. It features an X/Y/Z travel of 1060 × 610 × 610 mm and a spindle power of 18 kW, providing robust performance for various machining tasks. The machine includes a tool magazine with 30 positions and a maximum load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42SR vertical machining centre we have for sale. Contact us for further details. • Operating hours: 2,050 h Technical Specification Bodpfx Amsy Nab Hensli Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2011, Offered is a vertical three-axis machining center. Travels X/Y/Z: 1524mm/660mm/610mm, table: 1675mm x 660mm, spindle speed: 12000rpm, tool holder: SK40, tool changer: 24 positions, spindle hours: 1937h (spindle replaced 10/2019), chip disposal: scraper conveyor, control system: WinMax. Equipped with 3D probe Renishaw, scraper chip conveyor, coolant system, spindle cooler, coolant spray gun, chip splash protection enclosure, flushing system for chip removal, electronic handwheel, rigid tapping, DXF software, cooling air through spindle switchable. Weight: approx. 8400kg, overall dimensions X/Y/Z: approx. 4650mm/3470mm/3030mm. Inspection possible by arrangement. Bledpjy Ulmljfx Amnei

Condition: excellent (used), Year of construction: 2011, operating hours: 5,680 h, functionality: fully functional, Control system: WINMAX V08 Table dimensions: 1220 x 610 mm / D600 mm Table load capacity: 1000 kg X-axis travel: 1060 mm Y-axis travel: 610 mm Z-axis travel: 610 mm C-axis: 0 - 360 degrees A-axis: +/-92 degrees Spindle speed: 12000 rpm Spindle taper: SK40 Drive power: 11/18 kW Weight: 7500 kg Dimensions (LxWxH): 3200 x 2450 x 2650 mm Accessories / Features - NC rotary table - Swivel spindle - CTS 20 bar (Coolant Thru Spindle) - Chip conveyor - Coolant system Blodsy Ux Tfjpfx Amnoi - RENISHAW zero-point measuring system with touch probe - Machine feet - Manuals The machine is in very good technical condition. Immediately available.

Condition: used, functionality: unexamined, Hurco VMX60T vertical machining centre Bedpfxsy Duv Ue Amnjli

Condition: excellent (used), Year of construction: 2017, Hurco VMX30i vertical machining center Year: 2017 Technical details: X-Axis Movement 760 mm Y-Axis Movement 510 mm Z-Axis Movement 610 mm Table size 1020x510 mm Table load 1000 kg Spindle nose SK40 Spindle speed up to 12000 rpm Tool magazine 30 positions Max weight 7 kg Max tool diameter 80 mm Max tool length 300 mm Rapid traverse rate in X/Y/Z : 35/35/30 m/min Weight 4800 kgs Bljdpfx Ajzf Rxfomnoi Accessories/options: - With linear scales on all axis, with higher accuracy standard - Through spindle coolant - Chip conveyor - Cooling System - Spindle Cooling - Software options as per on the pictures Under power in our warehouse. Clamping units, vices, and dust extractor are not the scope of the delivery.

Condition: used, Year of construction: 2010, Milling machines Travel distance X: 760 mm Travel distance Y :510 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Hurco WinMax spindle chuck: SK - A40 spindle revolutions: 12000 rpm table size X: 1020 mm table size Y: 508 mm max. workpiece weight: 1350 kg tool changer: 24 - time input Power : 13,5 kW Torque: 214 Nm Rapid traverse: 35 m/min spindle cooling chip conveyor Bodpfx Aov D U Apomneli

Condition: excellent (used), Year of construction: 2006, Winmax control Travel X/Y/Z: 1270 x 660 x 610 mm Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar Pocket milling with islands Bsdpfx Aszfx Unsmnjli Synchronous thread cutting

Condition: excellent (used), Year of construction: 2011, Winmax control Bljdpfx Ajzfx Uhomnei Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm Bedpfezguh Hox Amnjli HSC-machines Number of axis: 3 milling machine / machining center table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler Hurco MAX 5 control with WinMax software

Condition: used, Year of construction: 2014, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Bjdpfszguhyjx Amnjli Spindle cooler

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, Bedpfxszh I Ags Amnjli C axis 360 degrees, table size 250mm diameter, table load 200kgs, spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, WinMax 5 control, through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Spindle speed 15,000 rpm, input 15Kw, Hurco Winmax 5 Control, Spindle taper BT40, 30 ATC, Coolant, Low volt light, Swarf Conveyor. Bedezh Hvxjpfx Amnsli

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, - ULTIMAX 4 control - toolchanger for 24 tools - coolant through spindle - chip screw - electronical hand wheel - measuring feeler Renishaw Bjdpfx Asx D A Ddsmnoli Technische Daten / technical details: Verfahrweg X / X-Travel 610 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 610 mm Tischgröße / table size 760x510 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 fach Eilgang / rapid feed 30 m/min Gewicht der Maschine ca. / weight 4700 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 9,000 h, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: WinMax / MAX5, table width: 508 mm, table length: 760 mm, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 24i was manufactured in 2015. It features an X-axis travel of 610 mm, Y-axis travel of 508 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 760 x 508 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 24i vertical machining centre we have for sale. Contact us for further details. - Tool Holder: SK40 / CAT40- Max. Torque: 95 Nm- Max. Tool Diameter: 80 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 7 kg- Rapid Traverse X/Y: 38 m/min- Rapid Traverse Z: 32 m/min- Additional Equipment: Automatic centralized lubrication, Chip flushing system, Scraper belt conveyor, Coolant unit, Electronic handwheel, Network connection- Included in Delivery: CNC milling machine Hurco VMX 24i- Excluded Items: Vise, tools, clamping devices, other accessories Bjdpfx Amezc Rzionsli

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal Bsdpfxsx Iikbj Amnjli - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: like new (used), Year of construction: 2001, Parts shown by hand not come. Bljdpfx Amek Iugzjnji