Screening machine dbr Fördertechnik 20/50-1

dbr Fördertechnik Screening machine 20/50-1

Year of construction: 2026, condition: new, Oscillating screen ASM series S&F oscillating screens and horizontal screens are used in many areas of the wood processing industry (sawmills, pelleting plants). Screening machines of the "ASM" series screen wood chips, wood pellets, sawdust and sawdust, waste wood, biomass and many other sawmill by-products in dry and wet applications. The material-protecting, horizontal-circular screening movement of the inclined screen box ensures a high separation efficiency of the vibrating screen. One advantage of the screening machine is that long and fibrous particles glide diagonally to tangentially over the screening surface. This means that - in contrast to throw screens - no jamming or plugging grain occurs. Further advantages are the robust design, the high screening capacity and the long, low-maintenance running time of the screening machine. In addition to standard dimensions, the company also supplies the "ASM" series as a "customising solution" in a split design for existing plants. This makes it possible to use new screening machines in cramped and difficult-to-access spaces in existing plants or sawmills. Screening machines of the "ASM" series offer screen sizes from 0.5 to 15 m² (per screen deck) and are characterised by a high screening capacity (up to 350 m³/h - depending on the material). At a glance: - Ideal for: Wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuel. - Areas of application: Wood industry, recycling and waste disposal, animal feed Tjdpfx Aein Ey Sebtob - Screening area: 0.5 - 15 m² (30 m² as double deck) - Screening capacity (depending on material): up to 350 m³/h - Separation size: 0.1 - 150 mm (depending on size) - Drive power: 0.55 - 15.0 kW (depending on size) Advantages: - High screening capacity - High separation efficiency - No jamming and plugging - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 6,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS Tedpfx Aboud H Dmjtob  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: refurbished (used), Wood chip screen IDL000756 - Three layers - Manufacturer: Passimo OY Tsdpfx Aotmtf Rsbteb - Screen area: 15 m2 - After renovation.

Condition: new, Year of construction: 2023, functionality: unexamined, Equipment: CE marking, New, high capacity, Pallmann chipping line for sale. Specification: Cross feeding chain conveyor; Inclined separator, reversible; Longitudinal chain conveyor, reversible incl; Cleaning roller conveyor; Flat belt conveyor with metal-free zone, reversible; Metal detector; Crane for contaminated material; Vibratory feeding table; Drum chipper „ORIGINAL PALLMANN“, type PHT 850 x 1250 with mechanical clamping system (3 knives-rotor); Auxiliary exhaust system; Trough belt conveyor for bark; Scraper conveyor; Double screw conveyor; Tjdpfx Asw Uqqnebtjb Trough chain conveyor, type Z-1600/2; Electric design & automation.

Condition: reconditioned (used), functionality: fully functional, Completely renovated Bruks BS 3 wood chip screen including stand Todpfxowiw Tme Abtob

Condition: ready for operation (used), Year of construction: 2019, operating hours: 15 h, machine/vehicle number: MP.DBDO-00198, Size 75 x 106 cm, non-stop function in feeder and delivery, integrated fine adjustment of the cutting plate, motorized die-cutting pressure adjustment, simple operating concept. The basic model is already equipped with all functions and equipment required to start production. Short makeready times, high flexibility thanks to an extended range of materials, accommodates smaller die-cutting tools. Machine number: MP.DBDO-00198, Impressions: 15 million. Tedpfjyhn Uqox Abtjb

Condition: ready for operation (used), Year of construction: 2006, A robust wood shredder is offered. Infeed width: 850mm, drive power: 90kW, rotor type: U-rotor, number of knife crowns: 45, motor speed: 1480rpm, control system: PLC. Equipped with control cabinet, U-rotor with 45 knife crowns, Holtec vibrating conveyor trough type DS 750 X/Y: 750mm/18500mm. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 3800mm/1700mm/1400mm. Inspection possible by appointment. Todpfxszgwx Ie Abteb

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, Chips and bark sorting screen, screening area 6,7 m2, el.motor 3 kW, capacity up to 150 m3/h, delivery includes metal frame. Todpfjwktyfjx Abteb

Condition: ready for operation (used), * Brand: Metso /CFBK * Type: 18/60-3 * Surface : 6000 x 1800 mm - 3 decks. Tedpfx Asywnh Rebtob * incl.: springs & 22 kW E-motor.

Condition: used, Year of construction: 2006, * Doppstadt DW 2560 E-1 electric shredder / wood chipper Todpfxsyw Exaj Abtsb * Year of manufacture: 2006 * ??Complete repair invoice available?? * Incl. control cabinet * Incl. supports * Weight: 25,000 kg * More pictures and videos via Whatsapp * All information subject to change and prior sale reserved.