Vertical machining center

Deckel Maho DMC 1035 V eco

Condition: excellent (used), Year of construction: 2010, operating hours: 13,362 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Siemens 810D, total height: 2,758 mm, total length: 3,137 mm, total width: 3,355 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, overall weight: 4,250 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 13,362 h, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Year of manufacture: 2010 - Condition: good, used - Control: Siemens 810D - Table: 1200 x 560 mm - Travels: 1,035 x 560 x 510 mm Fodpoyf Hymjfx Ag Aegc - Spindle speeds: 20 - 8,000 rpm

Condition: excellent (used), Year of construction: 2014, operating hours: 4,300 h, functionality: fully functional, Control: MAZATROL SMART Table dimensions: 900 x 430 mm T-slots in the table 3x18x125 mm Max. table load: 500 kg X-travel: 560 mm Y-travel: 430 mm Z-travel: 510 mm Max. spindle speed: 12000 rpm (Direct drive) Taper: SK40 Rapid traverses X/Y/Z: 42 / 42 / 42 m/min Feed rates: 1 - 8000 mm/min Drive power: 18.5 / 11 kW Power requirement: 400V / 50-60 Hz / 32A Weight: 4600 kg Dimensions LxWxH: 2080 x 2616 x 2780 mm Fedpey Snnmsfx Ag Ajgc Accessories, Equipments - MAYFRAN chip conveyor - Coolant system - Spindle through air - ITS (Intelligent thermal shield) heat compensation system - Tool presetter - Signal tower - Transformer The machine can be found in almost new condition. Unter power in Hungary.

Condition: excellent (used), Year of construction: 2011, Heidenhain TNC 620 control system Fodpfoyrir Eox Ag Ajgc Travel X/Y/Z: 1035/560/510 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Through-spindle cooling: 12 bar Chip conveyor

Condition: used, Year of construction: 2022, surface area 1321 x 610 mm max. table load 1800 kg travel -x axis 1270 mm travel -y axis 508 mm travel -z axis 508 mm spindle cone SK40 number of spindle speeds 12000 U/min spindle capacity 15 kW spindle torque max. 82 Nm rapid traverse y/x/z axis 28 m/min control HURCO MAX5 total power requirement 21 kW weight of the machine ca. 4,25 t dimensions of the machine ca. 4,1 x 3,35 x 2,6 m the machine is like new!!!, only 136 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm Fgjdpfoza Hquex Ag Aoc - Max. tool length: 250 mm - Max. tool weight: 7 kg Accessories: documentation

Condition: repair required (used), Year of construction: 2006, operating hours: 500 h, functionality: not functional, Control unit: SIEMENS Sinumerik 840D Table clamping surface: 650 x 410 mm Max. table load: 250 kg T-slots: 3x 14 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 410 mm Spindle speed range: max. 12,000 rpm Spindle drive power: 12 / 18 kW Tool magazine capacity: 24 positions Max. tool diameter: 77 mm Max. tool diameter (with vacant adjacent slots): 125 mm Max. tool length: 200 mm Max. tool weight: 5.0 kg Tool change time: approx. 1.3 sec Rapid traverse (X / Y / Z): 48 m/min Total power requirement: approx. 30 kW Machine weight: approx. 4.0 tons Required floor space: approx. 3000 x 2000 x 2500 mm Fjdpsy U Hw Ejfx Ag Aegc Equipment and Accessories: - NC rotary table (2-axis) - Coolant system - Spindle chiller - Machine feet Status Note:The machine is located in a technical vocational school and due to very infrequent use, the backup batteries have drained. These need to be replaced and the parameters must be reloaded.

Condition: used, Year of construction: 2023, surface area 1168 x 508 mm max. table load 1800 kg travel -x axis 1016 mm travel -y axis 508 mm travel -z axis 508 mm spindle taper SK40 Fgjdpfeza Hqnsx Ag Aoc spindle speed 10000 U/min spindle capacity 15 kW spindle torque max. 99 Nm rapid traverse y/x/z axis 28 m/min control HURCO MAX5 total power requirement 20 kW weight of the machine ca. 4,15 t dimensions of the machine ca. 3,7 x 3,3 x 2,5 m The machine is like new !!!, only 61 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 360 mm - Max. tool weight: 7 kg Accessories: documentation

Condition: excellent (used), Year of construction: 2007, operating hours: 2,777 h, functionality: fully functional, Controller ULTIMAX 4 DSM Table size 762 x 355 mm X-travel 660 mm Y-travel 356 mm Z-travel 456 mm Spindle speed 10000 rpm Tool holder type SK40 ATC-Magazin 16-fold Spindle power 11/9,4 kW Weight 2800 kgs Dimensions LxWxH = 1800 x 1600 x 2500 mm Accessories, features - Software options: DXF, rigid tapping, pocket/island, herical/ramp - Chip auger - Coolant tank Fgedezbx Dpepfx Ag Aec - Machine mounths - RENISHAW zero point presetter system with touchprobe - Some SK40 toolholders - Towel lamp The machine has been checked by HURCO engineer. RENIOSHAW ballbar test has been made on X-Y axes and shows 13 um (like at new machine). Original spindle hours 2777!!!! Very good condition.