Machining Center - Vertical

MORI SEIKI MV 45

Condition: used, Mori Seiki MV45/45 machining center with Fanuc 11M control, travels X 820 / Y 555 / Z 550 mm, 4,500 rpm spindle (7.5 / 5.5 kW, BT 45) and Kitagawa 4th axis for simultaneous 4-axis machining. Professional through-spindle coolant retrofit by Deuschle Spindelservice — rotary union through the pull stud, hydraulic tool clamping with pressure intensifier, dedicated 15 bar pump switched via M50 — plus box guideways for exceptional rigidity, 2 mechanical gear stages delivering 200 Nm torque in low gear, and approximately 75 BT 45 tool holders (all with through-coolant passage) included. Box-guideway construction and 4-axis simultaneous capability make this a stable, versatile workhorse for complex parts. CNC CONTROL Controller: Fanuc 11M AXES Number of controlled axes: 4 Number of simultaneous axes: 4 X-axis travel mm: 820 Y-axis travel mm: 555 Z-axis travel mm: 550 4th axis / rotary table: Kitagawa Bjdozy Svuepfx Anfoww SPINDLE Max. spindle speed rpm: 4.500 Spindle power kW (S1/S6): 7,5 / 5,5 Spindle torque Nm: 200 Spindle taper / interface: BT 45 Gearbox stages / speed ranges rpm: 2 COOLING Coolant through spindle bar: 15 EQUIPMENT & OPTIONS • Box guideways (flat slideways) — very rigid, stable machine • 4-axis simultaneous: Kitagawa 4th-axis rotary unit, hydraulically clamped, fully integrated in the control • Spindle with 2 mechanical gear stages — high torque, 200 Nm in low gear • Through-spindle coolant (IKZ) retrofitted by Deuschle: rotary union through the pull stud, hydraulic clamping/release with pressure intensifier, own 15 bar pump switched via M50 • Chip conveyor at the front, discharging to the right • Approx. 75 BT 45 tool holders included, all with through-coolant passage, plus about 20 pull studs • 4th axis (rotary table)

Condition: good (used), Year of construction: 1984, Grinding wheelhead: - motor power : 2,2 kW - spindle speeds : 1 000 - 8 000 rpm - spindle inclination (A-axis): -10° up to +27° - setting accuracy 1 min - height adjustment (Y axis) : 130 mm - stroke range (X axis) : 220 mm - oscillation stroke, steplessly adjustable during oscillation : 0-30 mm - oscillation frequency : 30/60 1/min Workhead: - radius setting (Z axis) : 0.01-50 mm - setting accuracy: 0,01 mm - retraction of slide from the grinding to the measuring position : max. 49 mm - cross table, clamping surface : 155 x 205 mm - travel X - Y : each 60 mm - maximum swivelling angle (B axis): 260° - supply voltage : 380 V - weight : 1200 kg Accessories/options: - grinding pressure variable - projector fixed in measuring position - 1 cabinet with accessories - different grinding wheels, flanges Bwedpfevmpabex Anfow - coolant tank - documentation Under power in our warehouse.

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 350 kW (475.87 HP), type of input current: three-phase, overall weight: 1,930 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,600 mm, total height: 2,000 mm, AMMONIA CHILLER GEA GRASSO 350 KW Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS Bwjdpfxsim R A Ij Anfew The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS CNC control: MSX-501III X axis mm: 560 Y axis mm: 560 Z axis mm: 660 B axis deg.: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X,Y,Z: 60,000 Max. rapid traverse m/min X,Y,Z: 50 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 70 Bsdpfx Asxfka Nsnfoww Max. tool diameter with adjacent positions empty mm: 170 Max. tool length mm: 450 Max. tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant (high-pressure): Yes EQUIPMENT Double chip conveyor ISO-40 taper High-pressure through-spindle coolant with pump Tool breakage detection probe Part measuring probe RENISHAW MACHINE DIMENSIONS Length mm: 3,755 Width mm: 2,300 Height mm: 2,610 Weight kg: 7,600

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 x-axis 500 mm y-axis 350 mm z-axis 610 mm Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Bwjdewmwrdjpfx Anfow Weight 3,200 kg with 4 axes SK 30 tools approx. 40 tool holders The machine has the following problems: - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)

Condition: excellent (used), Year of construction: 2006, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 28,000 rpm, rotational speed (max.): 28,000 rpm, Heidenhain 530 control system. 28,000 RPM spindle. HSK63 A tool interface. 80 bar coolant pressure. Chip conveyor. Blum tool measuring system. Renishaw probe. Numerous accessories, holders, and vices, and much more. Bwsdpfxe Afzgpo Anfow New spindle to be installed in summer 2024.

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle power : 18,5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 366 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 280 x 785 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6000 [rpm] * Live tools power : 5,5 [kW] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM5 - Distance between centers : 705 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 39 [kVA] MACHINE HOURS - Number of working hours : 7261 [h] WEIGHT & DIMENSIONS - Machine floor space : 3800 x 2143 [mm] - Machine height : 2232 [mm] - Machine weight : 6100 [kg] EQUIPMENT - CNC : MORI MSX-850 III (Mitsubishi 720BM) - Tool probe - 3 colors status lamp - Coolant tank - Chips conveyor Bedpfxoyxr U Rs Anfoww - Chuck 3 jaws : hydraulique - Number of turning tool holders : 3

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model Bwsdpfxsvtrc Sj Anfow The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer 5″ ASA spindle maximum revolutions: 4,200 rpm continuous C-axis 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.

Condition: used, Technical details: Tool holder shaft type: BT 40 Tool holder shaft type: Futter / Chuck Bodpfx Anjvfdr Njfsww Tool holder shaft type: Weldon Big selection of BT 40 Tool holders for sale. All kinds of Weldon, Chucker etc. available. See pictures. *

Condition: used, Year of construction: 1979, SKF cylindrical grinding machine with internal grinding attachment, hydraulically operated. Bedpsgt Ea Rsfx Anfeww