KBK slewingstation

Demag

Condition: good (used), Year of construction: 2006, Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Nwedergw Exopfx Aa Dob Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: used, Year of construction: 2024, operating hours: 52 h, load capacity: 200 kg, lifting height: 10,000 mm, empty load weight: 2,680 kg, construction height: 1,990 mm, fuel type: electric, total length: 2,800 mm, drive type: Elektro, construction width: 1,000 mm, working height: 10,000 mm, Vertical lift platform Front tyre size: 16x5 Rear tyre size: 16x5 Battery voltage: 24V Battery capacity: 250Ah Battery manufacturer: Haulotte Charger no.: ST413 Nsdpfevymbisx Aa Dewb

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN Njdpjx D Nxzofx Aa Dowb

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,396 h, clamping force: 4,200 kN, screw diameter: 70 mm, This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. Nwedpfx Aaox D Hyvj Dsb • Witmann included

Condition: new, JAN REILING BV has an extensive warehouse with more than 15,000 different DEMAG craneparts, from a nut to a complete crane. In addition to new parts, we also supply used parts, hoists and cranes. Our used hoists, cranes, parts and drives are ready in our warehouse completely overhauled. JAN REILING BV immediately supplies what you are looking for. Nodpeh Upx Ijfx Aa Djwb JAN REILING BV has built up an extensive supplier network within Europe. In addition to DEMAG, we can also supply you with parts from all other brands quickly and affordably. We supply various Demag parts new from stock, such as a: ropeguides Rope brakes hoistingmotors drivingmotor gearbox brake hoisting motor bottomblock loadhook runningwheels trolley pushbutton radiocontrol cabledrum types like : KBH KBF KBS KBA KBU 13/3PF 13/6PF 13/3KF 13/6KF 16/6KF 16/8KF 52D 52DF 62D 62DF 63D 63DF 72D AFW D04 D05 D06 D08 ZBA ZBF ZBR DH P100 P625 P632 P425 P408 P412 P1250 P1050 P1600 P2100 DH DMR DR DC PK DK contact us for the possibilities We supply both new and used

Condition: excellent (used), Year of construction: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1,877 bar Dose volume: 1,212 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Nedpoyctgbjfx Aa Dewb Platen size: 1,040x1,060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Control with air valve Control with hot runner x 5 Injection unit hardened - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Built-in printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 robot Year of manufacture: 2016 6-axis robot: 5 axes driven by servo motors (electric): X, Y-telescopic, Z, B, C Axis travels: X-1,200, Y-2,400, Z-4,000 Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Nwjdpfoyctfqex Aa Djb Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: KBK FFM, DEMAG KBK 2 - crane sky crane runway indoor crane Pictures shows an example crane runway with the below components. These are also available individually! Nsdpjmmbn Tofx Aa Dowb Please ask your crane runway about your dimensions Payload / lifting capacity from 80 125 250 500 to 1000 Kg KBK 2-R turnouts left and right (with conductor rail) KBK 2-R swivel discs 890mm (with conductor rail) KBK 2-R rails curved 15 30 45 60 90 degrees (with conductor rail) KBK 2-R rails (with conductor rail) The system can be delivered completely according to your wishes Rails, rail connectors, trolleys, end plates, drag cables, holders/hangers, accessories are available Chain hoists on request Very good, almost new condition Shipping by forwarding possible Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Nwodpfx Aeyctd Tea Dob Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Njdpfxeycqy Es Aa Dewb Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2025, operating hours: 64 h, load capacity: 200 kg, empty load weight: 2,680 kg, construction height: 1,990 mm, fuel type: electric, total length: 1,650 mm, drive type: Elektro, construction width: 1,000 mm, working height: 9,950 mm, Vertical lift platform Front tyre size: 16x5 Rear tyre size: 16x5 Battery voltage: 24V Battery capacity: 250Ah Battery year of manufacture: 2024 Njdpfx Aaswkbgmo Dswb

Condition: excellent (used), Year of construction: 2009, Sumitomo Demag IntElekt 50/370-200 / All-Electric Injection Moulding Machine Year of manufacture: 2009 Injection Unit: Screw diameter: 25 mm Shot weight: 39 g Injection pressure: 1580 bar Dosage volume: 44 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 370x370 mm Platen size: 520x570 mm Ejector: electric Clamping system: toggle lever Control system: NC5 - touchscreen Additional equipment: All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface 4x air valve Hot runner control Hardened injection unit – bimetallic Central lubrication Screw diameter can be changed Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Nwodpfx Aasycqyxe Deb Drive: Heating capacity: 5.7 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Nodpjycqyrofx Aa Dowb Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2020, condition: new, We are selling brand new bearing TIMKEN HH 840249 005-U/2 VP, packed in a box. Nwedpsl Axp Dsfx Aa Djb

Year of construction: 1992, condition: good (used), Compressor system consisting of: Screw compressor Manufacturer: MANNESMANN DEMAG Njdpfx Aori I Rrja Dowb Model: 085 Rallye Year of manufacture: 1992 Capacity: 7.9 m³ /min 3,000 rpm 45 kW Digital display Screw compressor Manufacturer: MANNESMANN DEMAG Model: 085 Rallye Year of manufacture: 1992 Capacity: 7.9 m³ /min Pressure: 75 bar 3,000 rpm 45 kW Refrigeration compressed air dryer Manufacturer: MANNESMANN DEMAG Model: AD160AB Year of manufacture: 1993 Oil-water separator Model: ÖWAMAT 6 Compressed air receiver Manufacturer: LOHENNER Model: ZU47/21 Volume: 5,000 l Vertical design Year of manufacture: 1993 Overpressure: 11 bar