Used Quadro Kl for sale (3,806)

Condition: excellent (used), The product to be processed is fed into the screening chamber via a feed hopper. The built-in screen assembly consists of a conical stationary screen – Ø 200 mm, height 120 mm – and a two-blade rotor. The finished product then falls into a container to be provided. The discharge height is 1,100 mm. The screen chamber is mounted to the frame using quick-release fasteners. Klodeytp T Eepfx Apyor The scope of delivery of the screening system includes 10 screen inserts. The drive is provided by an infinitely variable 5 kW Stoeber drive MNT 132S; EEX II; T3 via frequency converter, with a speed range of 0 – 1,400 rpm. Product throughput depends on screen size and product characteristics and ranges from 100 to 1,500 kg/h.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, pressing force: 5 t, operating speed: 300 mm/s, table width: 450 mm, table length: 320 mm, throat depth: 180 mm, oil tank capacity: 9 l, overall weight: 270 kg, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Kedpfevbdpysx Apyelr Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Condition: ready for operation (used), machine/vehicle number: 194S, Quadro Comil 194S № : 194-0743 Machine: Kjdpsudynrsfx Apyelr Material : stainless steel Motor : 4 KW Rotor dimensions : 195x105mm Sieve dimensions : dia. 200x120mm Inlet : Ø 150mm Outlet Ø 250mm Motor: 4 kW 400 Volt

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ksdpjyvvkwefx Apyjlr Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement Kjdpfxoxf Utao Apyolr - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Year of construction: 2026, condition: as good as new (ex-display), Spray cleaning system - Parts washing system with hinged door 1-tank version (washing), tank vol. 320 litres basket: LxW 1.100 x 1.100 mm useful height: 800 mm max. loading weight: 700 kg pump pressure of washing pump: 4,3 bar, pump power: 5,5 kW heating (electric) 20 kW; heatable up to 80°C control: Siemens Logo inclusive - steam vapour extraction and condensation water return - automatic water refill - autom. chemical dosing (0,8 - 5,5%, adjustable) - insulation of the complete plant - plant completely made of stainless steel 1.4301 - basket rim (removable on one side) - 7-day timer for the electr. heater Klsdpfjd Rkmxox Apyor - E-spray pipe h= 450 mm - Preparation for oil separator (electrical and mechanical) available New unit; currently used in our technology centre for washing tests

Year of construction: 1997, condition: used, Built in 1997 Pile height 400 mm Klsdoc Rhr Sepfx Apyjr section height max 250 mm Infeed height 700 bis 1.300 mm Delivery height 890 mm Speed max 60.000 Ex./h Weight 980 kg (approx.)

Condition: good (used), Size: max 500 x 330 mm min 140 x 150 mm Kodpfx Apog Du Aueyjlr Product thickness: side 4-96 Seiten Speed: max 100.000 Ex./h Pile height 300 mm Infeed height 500-1920 mm Delivery height 890 mm Power requirements 2 kW (220/380V, 50Hz) Length 3077 mm Width 894 mm Height 1835 mm Weight 960 kg (approx.)

Year of construction: 1997, condition: used, Built in 1997 Size max 660 x 1.020 mm Equipment feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife • polyurethane-steel folding rollers Klsdpfxsdmdt Uj Apyor delivery: • belt delivery

Condition: good (used), Rebuilt: 2011 Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm, min 150 x 200 mm Size cross fold: min 150 x 200 mm Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Kodpfxsl Dpc Es Apyjlr Weight with flatpile feeder: 1.850 kg (approx.) Equipment: Feeder: • flat pile feeder • MCC-control • Vacutable • Vaculift • Vacubelt • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left peripheral units and deliveries: • delivery A 56

Condition: like new (used), Year of construction: 2022, Helium leak detector Manufacturer: Leybold Kjdpot Urlrefx Apyelr Type: Phoenix Quadro EU Condition: As good as new Ready for use from 2022 unused Connection: 230V Delivery time: ex stock (u.ü.V.)

Condition: new, functionality: fully functional, Year of construction: 2021, machine/vehicle number: 2578, - Type: TLH-B-K5-800 - Excavator weight class: 12.0 t - 16.0 t Klodevu Umcjpfx Apyer - Cutting width: 800 mm - Weight: 458 kg - Volume 0.411 m³ - Adapter: MS21

Condition: used, Year of construction: 2003, machine/vehicle number: KL 77/A20/S2, functionality: fully functional, feed rate X-axis: 20 m/min, total length: 9,000 mm, Equipment: documentation/manual, We are offering this used HOMAG Optimat kL 77/A20/S2 EVENT edge bander, year of manufacture 2003. Manufacturer: HOMAG Kjdpfxoyw N Aps Apyolr Model: Optimat kL 77/A20/S2 EVENT Year of manufacture: 2003 Condition: used Type: edge bander Edge bander for sale due to purchase of a new machine. The machine is currently still in use and fully operational. It is a very robust machine, including a return system. Very stable and always delivers a perfect finish! Equipment: - Nozzles - Format cutters, 100mm diameter - Blow-off unit - Preheating unit - PUR bonding with cartridge heating station - 7 pressure rollers - Crosscut saws, straight and mitre - Top and bottom roughing cutters - Profile cutters, radius 1/2mm - Profile/flat scrapers - Nozzles - Polishing brushes - Machine equipped with top and bottom belts (very stable design) - Height adjustable at the front (automatic) - Profile cutters automatically adjustable via the program - Crosscut saws automatic - All functions can be switched on/off via the front screen - Return conveyor operated from the PC ->Demo available upon request! Price to be discussed via private message. Please do not hesitate to contact me if you have any questions. If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads Kodpfx Apoyv Da Hoyjlr - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: like new (used), Year of construction: 2022, Infeed height 900 mm Infeed width 300 – 800 mm Non-ferrous metals: Either 0.6 – 0.8 mm or 0.8 – 1.0 mm (has to be set before ordering) Non-ferrous metals: 1.0 – 1.2 mm (only with façade profiles) Steel (320 N/mm²): 0.55 – 0.70 mm Stainless steel: Max. 0.5 mm 3,830 mm x 2,045 mm x 1,275 mm 1,770 kg Kledpfx Apjxwxdgsyer

Condition: used, Year of construction: 1992, Falzmaschine / Folding Machine Stahl KC 78/6-KL 16 Seiten Falzmaschine / 16 pages Cross Fold Year 1992 - Serial-No. 4642/92-19602 Arbeitsbreite max. 780mm / Working width max. 780mm Palettenanleger / Pallet Feeder 1. Station 6 Taschen / 1. Folding Unit 6 Buckles Kedpfx Apevkkilsyslr 2. Station 2 Schwerter / 2. Folding Unit 2 knives  Schuppenauslage / Stream delivery Stahl SAK Inklusive Kompressor und Handbücher / Included Compressor and Manuals Soft PU Falzen, guter Zustand / Soft PU Rolelr, good condition Vorgelagerte und nachgelagerte Messerwellen / Front mounted and rear mounted slitter shafts Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Pressing force: 560 kN Kjdpfx Aoxz Ep Dspyolr For example, punch a 30 mm hole in 15 mm steel Stroke triggering via foot switch Assortment of tools is included in the price

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 3,050 kg, KUKA KRC4 linear axis – a high-precision, robust motion unit designed for industrial applications. Provides accurate control of movement sequences and serves as a central component in automation processes and robotic systems within production environments. Durable construction ensures consistent, reliable performance even under the most demanding conditions. Kledew I Ez Iopfx Apyer Linear Track Model: KL 1500/3T LINEAR UNIT 8 METER Year: 2013 Controller Cabinet: KRC4 Length: 8 meters Condition: USED, well working Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. ( Source: Kuka's Website )

Year of construction: 1998, condition: excellent (used), machine/vehicle number: 66000102, Pallet feeder, Vaculift, Vacubelt, DV Pump, MBO MPC Control, ASP 66 Shingle belt press delivery Kedpfx Apshqhgqjyelr Machine nr: 66000102

Condition: used, Falzmaschine / Folding Machine Heidelberg Stahlfolder KD.2/78-4-KL Kjdpfxox Sxpbe Apyolr Year 2001 - Serial-No. 703413/01-298045 Arbeitsbreite max. 780mm / Working width max. 780mm Rundstapelanleger / Round Pile Feeder 1. Station 4 Taschen / 1. Station 4 buckles 2. Station 2 Schwerter / 2. Station 2 knives Schuppenauslage / Stream Delivery SAK Rietschle Kompressor / Rietschle Compressor Inklusive Handbücher / Manuals included Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2002, functionality: fully functional, HOMAG Optimat KL79 A20/S2 (2002) – Full Configuration The edge banding line is in satisfactory working condition, fully operational and ready for production. Installed Units: Kodpfxsycg D Ts Apyslr • A20/S2 gluing station (edge thickness up to 20 mm) • Edge feed magazine • Front/rear end trimming units (two saw modules) • Top and bottom trimming units • Corner rounding units (two heads) • Profile scraper units (top/bottom) • Glue joint scraper • Buffing/polishing units • Pneumatic control and vacuum extraction system Technical Data (from manufacturer specifications): • Feed speed: 18–24 m/min • Edge thickness: 0.3–20 mm • Workpiece thickness: 12–60 mm • Minimum workpiece width: 55 mm (22 mm thickness) / 100 mm (60 mm thickness) • Machine length: 10,115 mm • Weight: ~6,200 kg • Power supply: 400 V, 50/60 Hz • Compressed air: 8 bar

Condition: used, Fieldbus, Profibus, SPS control, automation technology, controls and regulators, bus coupler, logic bus terminal, input terminal -Manufacturer: Beckhoff, bus terminal 4-channel digital input -Type: KL 1904 -Rated voltage: 24VDC -Number: 5x clamp available -Price per piece -Dimensions: 67/15/H100 mm Klsdpehu Ddzjfx Apyjr -Weight: 0.1 kg/pc.

Year of construction: 1969, condition: used, Motor potentiometer, regulator, motor controller, rotary potentiometer -Manufacturer: Kessler, motor potentiometer type P3-173 KL -Distortion Plan: PFN-64 -Rotary potentiometer: Rosenthal P 500 19 Ohm / Rosenthal P 100 470 Ohm -Individual components: see photos Ksdpjn Tvbrefx Apyolr -Dimensions: 550/200/H270 mm -Weight: 9.1 kg

Condition: good (used), Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm Klsdpfx Aoik Sl Hopysr -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Condition: good (used), Year of construction: 1978, Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punching press -Manufacturer: Mubea, hole punch type KL 100 -Printing capacity: 100 tons -Punching capacity: see photo type plate -Thrust: 500 mm Kodpfx Aewrn U Hopyslr -Accessories: incl. see photos -Dimensions: 1460/880/H2100 mm -Weight: 2660 kg