Vertical machining center

DMG DMC 1035 V

Condition: excellent (used), Year of construction: 2007, DMG DMC 1035 V Machining Center DMG DMC 1035 V with Heidenhain ITNC 530 Control, Year 2007, in Excellent Original Condition The machine comes from the toolmaking department of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2007 Technical Details X-travel: 1,035 mm Y-travel: 560 mm Z-travel: 510 mm Control: iTNC 530 Heidenhain Main Spindle: Speed Range (Main Spindle): 20 – 8,000 min⁻¹ Drive Power (Main Spindle): 13 / 9 kW Tool Holder BT 40 Draw Bar: ISO 7388-3-A AD40 Work Table: Clamping Surface: 1,200 x 560 mm Max. Table Load: 1,000 kg Table Height above Floor: 720 mm T-slots: 5 x 14 x 100 Tool Changer: Number of Tool Stations: 20 Max. Tool Diameter: 80 mm Max. Tool Diameter with free adjacent slot: 130 mm Max. Tool Length: 300 mm Max. Tool Weight: 6.0 kg Tool Change Time: 1.6 sec Chip-to-chip Time: 7.0 sec Feeds: Feed Rate: 24,000 mm/min Rapid Traverse: 30 m/min Hfodpfx Aksxqgrxjrsn Connected Load: 20 kVA Machine Weight approx.: 4.5 t Required Installation Space approx.: 4.0 x 4.0 x 2.5 m About the machine: Offered here is a DMG DMC 1035 V machining center with a Heidenhain ITNC 530 control. This machining center is in excellent original condition. It comes from a facility where it was used primarily for training purposes, meaning minimal hours of operation. The control is very easy to operate. The guideways are regularly lubricated by centralized lubrication. The DMG DMC 1035 V has been mechanically and electrically inspected by us. Take the opportunity to visit and inspect the DMG DMC 1035 V under power at our premises. You will find further milling machines from leading manufacturers on our website.

Condition: excellent (used), Year of construction: 2012, Control: Fanuc 0i-TD Equipment: - various tool holders - various driven tools - C-axis, driven tools Max. turning diameter: Ø 500 mm Max. turning length: 600 mm Bar capacity: Ø 75.5 mm Spindle speed: 3500 rpm Hfedsy Dqb Topfx Akren Spindle nose: A2 - 8 Machine weight: 6,700 kg

Condition: used, Year of construction: 2006, operating hours: 39,500 h, functionality: fully functional, machine/vehicle number: 15425021604, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,700 mm, total length: 2,800 mm, total width: 2,800 mm, table length: 1,200 mm, rotational speed (min.): 12,000 rpm, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 16,075 h, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: DC, Equipment: documentation/manual, DMG Deckel Maho DMC 1035 V vertical machining center, year of manufacture 2006 The machine has only processed plastics – in good condition! Year of manufacture: 2006 Machine number: 15425021604 Condition: Good Delivery terms: Free loading onto truck Location: 72178 Waldachtal !!!!!The machine must be collected on 21.10.2026! We can offer transport if required!!!!! Payment terms: Payment in advance – by bank transfer Internal number: 180-1 Can be inspected while powered on: Yes Hjdpfxjz I Dl Ie Akrsfn Technical data: - Operating hours (machine on): approx. 39,447 h (will increase slightly) - Spindle hours: 16,075 h (will increase slightly) - Tool holder: SK40 - Max. spindle speed: 12,000 rpm - Tool magazine: 30 positions - Table dimensions: 1200 x 560 mm - Control system: Heidenhain iTNC 530 - Travels X / Y / Z: 1035 / 560 / 510 mm - 400 V / 50 Hz / 35 kVA Scope of delivery: - Manuals and documentation - Wireless measuring probe Heidenhain TS640 - Handwheel - Programmable 4th axis Lehmann - Angle plate - Manual dividing head - Swivel vice Note: The vices on the machine table and the tool holders in the magazine are not included in the scope of delivery! Dimensions & weights: - Installation dimensions L x W x H approx.: 2800 x 2800 x 2700 mm - Weight approx.: 5000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ►If required, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with exclusion of all warranties. ►Technical data without guarantee. ►Subject to prior sale. ❗The goods are sold exclusively to businesses❗

Condition: excellent (used), Year of construction: 2010, CNC machining center DMG 1035 V ecoline 2010 Siemens 810 D / Shopmill Travel ranges: X-axis: 1035 mm Y-axis: 560 mm Z-axis: 510 mm Spindle: Tool holder: SK 40 Speed range: max. 10,000 rpm Tool magazine: 20 magazine positions Table design: Hfjdpez Iyp Aefx Akren Fixed table 1200 x 560 mm - Chip conveyor - Internal cooling lubricant system (IKZ) 20 bar

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Please see the pictures for further details; we are of course happy to answer any questions you may have. Hsdpfovx N Shox Akrefn The system can be viewed with power on. The buyer must organize collection with a suitable truck. The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500).

Condition: used, Year of construction: 2014, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, controller model: Sinumerik, table width: 560 mm, table length: 1,200 mm, rotational speed (max.): 8,000 rpm, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, spindle nose: SK40, We offer this used DMG MORI DMC 1035V ecoline vertical machining center, manufactured in 2014. Factory number: 1539000738A Year of manufacture: 2014 X/Y/Z 1035 × 560 × 510 mm Table: 1200 × 560 mm Maximum spindle speed: 8000 rpm SK40 Sinumerik Spindle overhauled in June 2026 First owner Weight: 4500 kg Hedpfxez Iyv Aj Akrsfn If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2012, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm CNC-control HEIDENHAIN TNC620 table-size 1200 x 560 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 10.000 U/min drive capacity - spindle motor 13 kW feed stepless 20.000 mm/min rapid traverse 25 m/min tool change unit 20 Pos. coolant IKZ 20 bar voltage 400 V total power requirement 17 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 2,55 x 2,30 x 2,25 m chip conveyor 3,90 x 0,95 x 1,60 m - Serial No.: 1539000377A Hjdpfx Ajw A Spvekrjfn - Machine ON: 21.689 h - Program Run: 9.021 h - CNC-Control: Heidenhain TNC620 - elektronic hand wheel - chip conveyor - coolant through spindle 20 bar

Condition: excellent (used), Year of construction: 2009, Hwacheon Cutex 160, Year 2009 CNC Control Fanuc OT i 12-station turret LNS bar feeder (max. bar diameter 42 mm) Tool package (including driven tool holders) Chip conveyor Tailstock Technical data: Swing diameter over bed: 550 mm Max. turning diameter: 300 mm Max. turning length: 300 mm X-axis travel: 170 mm Z-axis travel: 335 mm C-axis Hfedpfxsyc Nrye Akron Max. bar capacity: 45 mm Spindle speed: 6000 rpm Turret: 12 stations Rapid traverse X: 36 m/min Rapid traverse Z: 36 m/min Drive power: 20 kW Machine weight approx.: 3200 kg

Condition: good (used), Year of construction: 2008, MACHINE SPECIFICATIONS X travel: 1035mm Y travel: 560mm Z travel: 510mm Rapid traverse X/Y/Z: 25m/min Feed: 20m/min Table dimensions X: 1200mm Table dimensions Y: 560mm Maximum table load: 1000kg Spindle speed: 9000rpm Power: 13kW, torque: 83Nm Tool holder: SK40 Hfsdpfx Asxq Hbtokren Tool positions: 20 Maximum tool diameter: 80mm/130mm Maximum tool length: 300mm Maximum tool weight: 6kg Machine dimensions X: approx. 4000mm Machine dimensions Y: approx. 4000mm Machine dimensions Z: approx. 2500mm Weight: approx. 4100kg Control: FANUC 32 Operating hours: 23918h Processing hours: 11991h Including chip conveyor DMG EcoLine UNO 115 tool presetter Probe tool

Condition: good (used), Year of construction: 2008, Working hours: - Power on: 44113 - Spindle hours: 13284 Equipped with: * CNC control SIEMENS 810 D powerline * 20-station ATC * Coolant equipment * Chip conveyor Hfodpfx Akszquqiersn x-travel 1035 mm y-travel 560 mm z-travel 510 mm table surface area 1200 x 560 mm table load 1000 kg tool taper SK 40 spindle turning speed - stepless 20 - 8000 rpm feeds longditudinal/cross/vertical - 20000 mm/min rapid traverse 25 m/min spindle drive motor 13 kW dimensions of machine 2,6 x 2,6 x 2,7 m weight of the machine approx. 4,1 t

Condition: excellent (used), Working travels 860 x 560 x 600 mm Hfodpezbrrtofx Akrsn Table size 1000 x 560 mm Spindle taper SK40 Spindle speeds -10'000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 Coolant through spindle 3D measuring tracer Tool lenght measuring device Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2010, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Siemens 810D / ShopMill, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,035 mm Hfjdpfxozqfv Ao Akren Travel range, Y-axis: 560 mm Travel range, Z-axis: 510 mm Spindle speed, max.: 10,000 rpm Table width: 560 mm Table length: 1,200 mm Number of tool magazine positions: 20 MACHINE DETAILS Control system model: Siemens 810D / ShopMill Control cabinet cooling: Rittal SK 33023.100 Spindle operating hours: 11,000 h Total operating hours: 33,600 h EQUIPMENT Internal coolant supply (ICS) Chip conveyor

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : ISO40 - Spindle power : 13 [kW] - Spindle speeds : 8000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 1035/560/510 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 20 TABLE - Table dimensions : 1200x560 [mm] - Maximum weight upon table : 1000 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 17 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2850x3250 [mm] - Machine height : 2700 [mm] - Machine weight : 4300 [kg] Hsdszrh S Njpfx Akrsfn MACHINE HOURS - Number of hours under power : 31240 [h] - Number of working hours : 3770 [h] EQUIPMENT - CNC : FANUC 0i-MC - Type of divisor : Par fonction M * manufacturer : NIKKEN - Coolant tank - Chips conveyor - Electric transformer

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: EC1606, grinding length: 1,200 mm, grinding width: 500 mm, grinding wheel diameter: 400 mm, distance table to spindle center: 700 mm, grinding wheel width: 50 mm, overall weight: 6,100 kg, grinding spindle speed: 1,500 rpm, space requirement height: 2,600 mm, space requirement length: 4,600 mm, space requirement width: 2,200 mm, Like-new, lightly used surface grinder. In very good condition. Hfedpfxoy Rxuho Akren Includes digital display on the Y-axis (SINO SDS6).

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 1539000208A, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Heidenhain TNC 620, rotational speed (max.): 10,000 rpm, Note: The seller can offer disassembly and loading for an additional charge. TECHNICAL DETAILS Hfedoztb Imopfx Akrjn Travel range, X-axis: 1,035 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 510 mm Rapid traverse rate: 25 m/min Table size: 1,200 × 560 mm Motor spindle speed: 10,000 rpm AC main drive power: 13/9 kW at 40/100 % duty cycle Tool positions: 20 Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain TNC 620 Connected load: 17 kVA Rated current: max. 28 A Fuse rating: 35 A Supply voltage: 400 V Supply frequency: 50 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,100 kg EQUIPMENT Electronic handwheel Chip conveyor with extended coolant tank Coolant air blast switchover Coolant spray gun Heidenhain TS 649 touch probe