CNC lathe

Doosan DN Solutions Puma GT 2600 LM

Condition: like new (used), Year of construction: 2021, Like-new Hermle C400U Only 3,000 operating hours Immediately available! Control: Heidenhain TNC640 Travel: X-850 mm, Y-700 mm, Z-500 mm A-axis: C-axis: 360 Spindle speed: 20 - 15,000 RPM Spindle drive power : 10/20 kW tool holder: Sk40 tool magazine: 38 NC swivel rotary table: Diameter 650 mm max. table load: 600 kg Internal coolant supply (IKZ) and chip removal package: 40 bar electric handwheel: Yes probe: M&H Hedpfo Agp Uzjx Airjw suction: Yes Air through spindle center: Yes

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle motor power: 26 W, spindle speed (min.): 20 rpm, spindle speed (max.): 2,800 rpm, spindle bore: 102 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, total height: 2,110 mm, total length: 4,636 mm, total width: 2,035 mm, spindle nose: ASA 11, overall weight: 6,900 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​2-axis CNC lathe "DOOSAN model PUMA GT3100L" complete with chip conveyor. Hsdpfx Aex N R E Aoirjw

Condition: used, Year of construction: 2015, x-travel 1140 mm Hodpoxx A Ewsfx Airow y-travel 710 mm z-travel 610 mm CNC-control Heidenhain TNC640 table-size 1300 x 700 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 10.000 U/min feed stepless max. 10.000 mm/min rapid traverse 24/24/24 m/min tool change unit 30 Pos. coolant IKZ 40 bar drive capacity - spindle motor 7,5 / 11 kW voltage 400 V total power requirement 25 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 3,25 x 3,08 x 3,00 m chip conveyor 4,30 x 0,80 x 1,60 m band filter unit 2,00 x 1,00 x 1,30 m coolant tank 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor - X- and Z-Axis with 6 roller supports for each axis!

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: Hermle C 50 U dynamic Control: Heidenhain iTNC 530 Year: 2007 SPECIFICATIONS X-Axis: 1.000 mm Y-Axis: 1.100 mm Z-Axis: 750 mm Rapid motion: (X/Y/Z): 60 / 60 / 55 m/min. B-Axes: ° Max. revolution: 10.000 rpm Spindle power: 12 / 23 kW Torque: 157 / 298 Nm Tool: HSK A 63 Tool capacity: 60 Table size: 1.150 mm SRT1150 mit V&B 20-fach 20 x Vischer & Bolli Flanschkassette 10kN, Art. Nr.: 750 160L Stichmaß 200 nach Freigabezeichnung. Absoluttoleranz über alle Flanschkassetten: +/- 0,01 mm Equipment Chip conveyor Internal cooling: 80 bar Electronical handwheel Tool measurement: Blum Hodpfx Aij Afxlqsrew Oil mist separator: vorbereitet Chip rinsing pistol Caliper: Heidenhain TS 642 Genauigkeitspaket

Condition: used, Year of construction: 2023, turning diameter 120 mm Hsdpey Nfdmofx Airew turning length 640 mm control Fanuc 32iT total power requirement 45 kW weight of the machine ca. 8,5 t

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, total height: 2,755 mm, total width: 3,565 mm, table load: 300 kg, overall weight: 4,650 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 32,000 W, number of slots in tool magazine: 60, product length (max.): 3,765 mm, number of axes: 5, This 5-axis DMG MORI DMU 50 3rd gen was manufactured in 2017. It features impressive axis travels of 650 x 520 x 475 mm and a maximum spindle speed of 15,000 rpm. The machine includes a tool magazine capacity of 60 positions and a robust table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 50 3rd gen vertical machining centre we have for sale. Contact us for further details. • B-axis travel: -35° / +110° • C-axis travel: ±360° • Table diameter: 630 mm • Machine working footprint: approx. 7.0 x 5.75 x 2.76 m Hedpfx Ajz Du Dyoirjw • Transport dimensions (L x W x H) – Machine: 3.765 x 3.565 x 2.755 m • Operating hours: 42,253 hours (under power) / 21,241 hours (spindle cutting time) Additional equipment • Heidenhain TS 649 tool probe • Blum laser tool measurement system • Vises • Chip conveyor (transport dimensions: 3.2 x 1.396 x 1.29 m) • Internal cooling system/unit (transport dimensions: 1.525 x 1.205 x 1.6 m) Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2022, operating hours: 1,400 h, functionality: fully functional, turning length: 1,350 mm, turning diameter: 550 mm, spindle motor power: 48 W, spindle speed (max.): 3,000 rpm, spindle bore: 95 mm, travel distance X-axis: 380 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 1,350 mm, spindle nose: A2-11, 12-tool turret Spindle speed: 12,000 rpm Tool presetter arm Chip conveyor High-pressure pump: 15 bar Hsdpfx Aozzb Ameirjw Autoblok SLU3.1 steady rest Chuck: Ø315 Bar feeder interface Tool holder set

Condition: ready for operation (used), Year of construction: 2021, A Fanuc CNC drilling and machining center is available. Travels X/Y/Z: 700mm/400mm/330mm, spindle-to-table distance: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, spindle speed: 24000rpm, spindle power: 5.5kW, torque: 7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool positions: 21, tool interface: BT30, positioning accuracy: 0.006mm, repeatability: 0.004mm. Machine dimensions X/Y/Z: approx. 2200mm/1950mm/2200mm, weight: approx. 2500kg, control: Fanuc 31i-B5, power-on hours: 6534h, operating hours: 473h. Documentation available. An on-site inspection is possible. Hsdezlt Shepfx Airsw

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m Hodpfswwl I Iox Airew The guides have been outdated 10 years ago

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-40 mm/Ø 0-40 mm/Ø ±6,5 ° longitudinal feed of the table 1530 mm table speeds 0,02-6 m/min 130 kg cross travel max. 270 mm 130 inkl. Spannung kg 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of machine already delivered with special options -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original Hedpfxeuxftre Airjw original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control