CNC lathe

DOOSAN LYNX 300

Condition: good (used), Year of construction: 2012, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, 712mm max turned length, Lhedpfxoz D Ayvj Akmon 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, FANUC Oi control, 3 jaw chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor.

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2024 Control : Siemens 840 Dsl - Operate Speed : 15000 rpm Movement X/Y/Z : 800/800/550 mm Tool holder : HSK 63 In General: Year of manufacture:2024 Control system:Siemens 840 Dsl - Operate Travel ranges X/Y/Z:800/800/550 mm Rotational speed:15,000 rpm Tool holder:HSK 63 Spindle: RPM:15,000 Max. power:31 kW Max. torque:194 Nm Tool holder:HSK 63 Fluid supply:Blast air + coolant NC swivel table: A-axis:+/- 130° Drive:Tandem drive C-axis:360° Drive:Direct drive (torque motor) Clamping surface:800 x 630 mm Max. table load:1,400 kg Tool magazin: Magazine I:Standard Number of stations:42 Magazine II:ZM 88 Number of stations:88 Tool changer:Pick-Up Max. tool diameter:80 (125) mm Max. tool length:350 mm Lhsdpfe Aa Hmxjx Akmon Equipment: Position Sensors:Direct scales on all axes (glass scales) Chip Removal:Chip conveyor Coolant Supply:Internal coolant system, 80 bar Workpiece measurement:Touch probe Tool measurement:Laser Kinematics measurement:Automatic, Kinematics Opt Emulsion mist separator:Mechanical Machine accuracy I:Package I Increased accuracy in A and C axes:Yes Turning function:Interpolation turning S840

Condition: as good as new (ex-display), Year of construction: 2022, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, UK Delivery Only Global S Green 07.07.05 Shop Floor - additional bellows on the X & axis HH-AS8-T5 Automatic Indexing Probe Head (5° increments) HP-THDe High Definition Touch Trigger Probe Lhjdpfszimrvex Akmsn Year of Manufacture: 2022 ISO 10360-2:2009: MPE(E0/E150)1) [18-22°C] 1.5+ L/333 MPE(E0/E150)1) [15-30°C] 1.5+ L/263

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 550 mm, turning diameter: 350 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 580 mm, spindle motor power: 18,500 W, total height: 1,755 mm, total length: 3,130 mm, total width: 1,643 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 30 m/min, type of input current: AC, overall weight: 4,800 kg, swing diameter over bed slide: 550 mm, chuck outer diameter: 203 mm, center width: 668 mm, center height over cross slide: 315 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller manufacturer: Fanuc, controller model: Fanuc 21i-TB, Doosan Puma 240C (2012 Model) Heavy-Duty Boxway CNC Lathe Short Overview Available for sale is a production-ready 2012 Doosan Puma 240C CNC Lathe. This machine is a highly reliable shop workhorse featuring a solid, single-piece cast iron bed with traditional box guideways for heavy-duty cutting and superior vibration dampening. Equipped with the factory "C" Big-Bore package, this lathe pairs a large 8-inch chuck capability with a 3-inch through-hole bar capacity, making it an ideal choice for high-mix job shops and mid-sized turning applications. Key Selling Points for Buyers Lhsdpezluq Eofx Akmon Compact Footprint: Delivers heavy-duty boxway rigidity without taking up excessive floor space. Big-Bore Throughput: Handles up to 3-inch bar stock, matching the material capacities of much larger machine classes. Box Guideway Precision: Offers exceptional tool life and dampening for aggressive roughing cuts on tough alloys.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 42, number of axes: 5, This 5-axis HERMLE C42 U universal machining centre was manufactured in 2011. It features a travel of 800 x 800 x 550 mm and a spindle speed of 18,000 rpm. The machine includes a NC swiveling rotary table and a tool magazine with 42 positions. If you are looking to get high-quality machining capabilities, consider the HERMLE C42 U machine we have for sale. Contact us for further details. - Table / Rotary System: NC swiveling rotary table PW 800 with torque drive in C-axis and helical tandem drive in A-axis- Pallet Changing System: Included- Pallets Included: 3x Palette 630/STM320 Sternnut- Automatic Cabinet Doors: Included- Hydraulic & Pneumatic Expansion: Included- High Pressure Coolant (IKZ): Internal coolant supply 80 bar- Chip Conveyor: Scraper belt conveyor / Standard chip conveyor- Filtration: Paper band filter- Coolant System: Vario pressure limiting valve, standard coolant unit, sealing air for scales, bed flushing- Air Blow Devices: Air blow device, air blast through spindle center- Chip Flushing Gun: Included- Mist Extraction: Oil mist extraction- Enclosure Top: Automatic mechanical cabinet roof- Safety Glass: Laminated safety glass window- Compensation: Electrical thermal compensation iTNC- Handheld Control: Electrical hand control module iTNC- Measuring Probes: Heidenhain measuring probe incl. preparation, BLUM tool breakage/measurement A2- Tele-Service: Remote maintenance- Supply Voltage: 400 V / 3~- Mains Frequency: 50 Hz- Control Voltage: 24 V-- Nominal Current: 60 A- Power Consumption / Load: 37 kVA Technical Specification Taper Size HSK 63 Lhedpez Nf N Ejfx Akmjn

Condition: used, Year of construction: 2006, Measurement range width/length/height: 1600/1800/1000 mm Dimensions width/length/height: 2450/2940/3800 mm Maximum workpiece weight: 3500 kg Measurement machine weight: 8500 kg Creep feed: 0 - 5 mm/s Setup operation: 0 - 70 mm/s Series measurement operation Axis: max. 300 mm/s Vector: max. 425 mm/s Software version: Calybso 2023/ Service Pack 2 – Version 7.6.08 Various measuring probes Measuring head Lsdpfx Aszn Iucjkmjhn

Condition: excellent (used), Year of construction: 2019, operating hours: 31,800 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, feed rate X-axis: 42,000 m/min, feed rate Y-axis: 42,000 m/min, feed rate Z-axis: 42,000 m/min, controller manufacturer: Siemens, controller model: 840d, total height: 2,750 mm, total length: 2,850 mm, total width: 2,350 mm, rotational speed (max.): 20,000 rpm, overall weight: 7,500 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 13,300 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, For sale: a DMU 50 3rd generation. The machine was on display in the DMG showroom from 2019 to October 2021. Lsdpfxj Aaz Nne Akmohn The following features are included: CELOS with Siemens 840D sl Operate Tool magazine with 30 positions, HSK-A63 Direct path measuring system IKZ/chip conveyor package, IKZ 40 bar, 600 liter belt filter system Coolant/air blow-off switchover Work area flushing Double-layer filter, 25 µm Rotating viewing window Spindle speed: 20,000 rpm Flushing gun for chip removal Oil and emulsion separator Measuring probe, infrared TS649 Laser tool measurement 3D Quick SET MPC Machine Protection Control Signal light, 4-color Cooling unit for control cabinet DXF Reader Operating mode 4 Electronic handwheel DMG Mori Netservice IoT Connector Service Agent (Celeos) Messenger (Celos)

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 995 mm, turning diameter: 660 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, rotational speed (max.): 12,000 rpm, bar passage: 65 mm, total height: 2,597 mm, total length: 3,820 mm, total width: 2,348 mm, spindle nose: A2-6, overall weight: 9,570 kg, We are pleased to offer this well-maintained CNC turning and milling machine. It is a Mazak Integrex 200-IV S, manufactured in 2010, fitted with the Mazatrol Matrix control system. Technical specifications: Turning diameter: 660 mm Max. turning length: 995 mm Bar capacity: 65 mm Travel on X-axis: 580 mm Travel on Y-axis: 150 mm Travel on Z-axis: 1,045 mm Travel on W-axis: 1,490 mm B-axis travel: –30 to 210° Main and counter spindles: 5,000 rpm C-axis indexing of both spindles: 0.001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 40 tool positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally! Ledpfx Ajz Ndu Eekmshn

Condition: good (used), Year of construction: 2005, Mazak Integrex 300 - III turning/milling center, year of manufacture 2005, CNC control 640 MT, travel X/Y/Z 630/230/1,585 mm, B axis NC swiveling head -30°/+195°, Lhsdpfx Aoyzfr Iekmon tool magazine with 80 positions Capto, main spindle 26 kW, C axis 0.001°, tailstock MK 5, high-pressure coolant system 70 bar with filtration unit, Tooleye, 5-axis simultaneous machining package, Mazak Monitoring System, chip conveyor,

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle power : 18,5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 366 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 280 x 785 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6000 [rpm] * Live tools power : 5,5 [kW] TAILSTOCK - Tailstock type : Numérique Lhjdpfxoyxr U Rs Akmon - Type of cone : CM5 - Distance between centers : 705 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 39 [kVA] MACHINE HOURS - Number of working hours : 7261 [h] WEIGHT & DIMENSIONS - Machine floor space : 3800 x 2143 [mm] - Machine height : 2232 [mm] - Machine weight : 6100 [kg] EQUIPMENT - CNC : MORI MSX-850 III (Mitsubishi 720BM) - Tool probe - 3 colors status lamp - Coolant tank - Chips conveyor - Chuck 3 jaws : hydraulique - Number of turning tool holders : 3