CNC lathe

Doosan PUMA 3100LY

Condition: used, Year of construction: 2022, turning diameter 420 mm turning length 1350 mm spindle passage 101 mm control Siemens SL 828D ShopTurn number of controlled axis 4 turning speed range 3000 U/min power requirement 22/18,5 kW rapid speed 30 m/min number of tapers in turret head 12/24 BMT 65 number of driven tools in turret 12 BMT 65 Spindel speed of driven tools 5000 U/min Spindelpower on driven tool 7,5/5,5 kW y-axis +/- 65 mm tail stock MT-5 weight 8,0 t dimensions 5,7 x 2,3 x 2,32 m Heavy CNC- lathe with driven tools and Y- Axis in very good condition. First instalation: 03/2023 Appr. 5400 h Power on. Dsdpfx Adozfqf Sjrock - 2x 3-jaw chuck Ø 325 + 400 mm - some fixed tool holders - Tool pre- setter - chip conveyor - 4x driven tool holders - 2 + 2 driven toolholders with Capto C4 - oildust collector - band filter system with appr. 1000 ltr. - hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm) - 3 colour signal lamp - coolant gun - some jaws - external programming system MCS40501/2 - build in spindle

Condition: used, Year of construction: 2011, turning diameter over bed 640 mm turning length 2.000 mm control 840D incl. Weiler SL1 Siemens centre height 320 mm swing diameter over face slide 405 mm Djdpfx Ajzhcfvjdrock radial face slide travel 380 mm travel upper slide 130 mm bed width 380 mm turning tool - shaft cross cut 32 x 25 mm turning speed range - main spindle 0 - 2.500 min/-1 transmission ratio 2 transmission ratio 1 0 - 800 min/-1 transmission ratio 2 0 - 2.500 min/-1 power capacity - main spindel 20,5 / 17 kW max. Torque 1.400 Nm spindle head Gr. 8 DIN 55027 spindle diameter in front bearing 120 mm spindle bore 83 mm taper bore 90 metrisch power feed longitudinal 10.000 N power feed coss 9.000 N feed range 0 - 20 mm/-1 rapid traverse 10/7 | 5/3,5 m/min metric 0,1 - 400 mm inch 1/4 - 56 G/1" module mm . II dia. of quill 100 mm quill stroke 200 mm capture MK 5 total power requirement 30 kVA weight of the machine ca. 5,7 t dimensions of the machine ca. 5,0 x 3,5 x 2,0 m Lathe cycle controled WEILER - E 60 / 2000

Condition: excellent (used), grinding diameter 155 mm grinding length 400 mm centre height 80 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : STUDER (CH) Universal Precision Cylindrical Grinding Machine Model S 20-12 Year Height of centers / Grinding Ø 80 / 160 mm Center distance / Grinding length Z-axis 400 / 420 mm Internal Grinding Ø mm Workpiece weight flying / between centers max. 5 / 20 kg Table speeds 0,1 – 3,5 m/min Table way automatic, min. 1 mm Table swivable max. 30 ° Universal Grinding Head cross way max 170 mm Rapid infeed way 30 mm Infeed way 1,9 mm Feeds 0,001 – 0,04 mm/Ø Swivable 10 / 30 ° Grinding wheel dimension : bore x width x Æ 127 x 30 x 300 mm Internal Grinding device separately mounted mm Dcsdpfxozbczxs Adrjk Workhead Fitting taper/conus MK 2 Speeds 60 – 1.200 rpm Spindle drive 2,2 kW Total electric load approx.. 5 kW - 400 V – 50 Hz Weight approx. 1.000 kg Accessories / Special Features: • Electrohydraulic conventional control with PHILIPS Digital Readout for the infeed (x-axis) • Preinstalled automatic cycles for plunge-in grinding, traverse grinding, internal grinding with roughing, finishing, fine-finishing, spark-out • Separately mounted Internal Grinding Device with belt-driven internal grinding spindle • Workhead with Quck-release collet chuck, swivable 90° • (right now the machine is not equipped with a tailstock, an original STUDER tailstock; used can be supplied for approx.. EUR 5.000,--) • Wet grinding equipment with coolant filtration unit, separate electric cabinet, manuals Condition : Very good ! Universal machine for all sorts of grinding tasks ! Video : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, before loading

Condition: good (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, CNC control Heidenhain iTNC530 24-fold automatic tool changer electronical handwheel chip conveyor coolant through spindle device Technische Daten / technical details: X-Weg / X-travel 860 mm Y-Weg / Y-travel 560 mm Z-Weg / Z-travel 600 mm Dcjdpey Hqmhjfx Adrjk Spindelaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed 0-10000 UpM /rpm Eilgang X,Y,Z / rapid feed X,Y,Z 24,24,20 m/min Tischaufspannfläche / table clamping area 1000x560 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebleistung Spindel 40%ED / drive capacity spindle 40%ED 18,5 kW Gewicht ca. / weight 6.500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling Dcedpfew S Efzsx Adrsk The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Dcsdpfxer Nfvms Adrjk Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: good (used), Year of construction: 2018, functionality: fully functional, measuring range X-axis: 1,500 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 700 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Reference XI 15.9.7 Year of manufacture: 2018 Manufacturer: Hexagon Measuring range: 1500 x 900 x 700 mm Accessories: Probe head mount: HP-SX-5 probe head Probe head: +2 change discs Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0, Controller B5 Dcjdpfxoyg I Hdo Adrsk As specialists, we are pleased to offer you tailored advice to find the right machine for your measurement requirements. We offer worldwide delivery upon request!

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Dcedpfx Ajxq R Evsdrsk Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, CMS AURA automatic vertical dry seaming machine Max. working height: 2.700 mm Glas-Thickness: 4-22 mm Max. Glaslänge: 3.100 / 4.500 mm Djdpfx Adowd Ihqsrsck Stand-Alone or integrated into the ISO Line Very easy operation with nearly no maintainance.

Condition: used, Year of construction: 2000, grinding diameter 360 mm grinding length 1600 mm centre height 180 mm internal diameter 0 mm grinding depth 0 mm swing diameter 0 mm total power requirement 40 kW weight of the machine ca. 10000 kg dimensions of the machine ca. m Dcsdpst Hw Rdofx Adrsk K A R S T E N S (Germany) Universal “CNC” - Cylindrical Internal and Face Grinding Machine also for grinding excentric and cam profiles and polygons and even suitable for Threadgrinding Model K 51 – 1500 Year 2000 Serial No. 99 093 Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mm Cylindrical Grinding: Grinding Ø, approx. 5 - 360 mm Grinding wheel: Ø x width x bore 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rpm Drives of cyl./int/face spindle units 7.5/4,0/7,5 kW Grinding Wheelhead: 3 Positions = B-Axis Head swivels in 3 positions = 240 ° / 17,5 degree X-axis adjustment in total 360 mm Increments for infeed 0,001 – 125 mm Workpiece wheelhead = C-Axis Spindle speeds steplessly adjustable 10 – 1.000 rpm Spindle taper / Spindle bore MK 4 / 24 mm Table speeds 0,01 – 10.000 mm/min Total electrical load 40 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: * Very versatile CNC Grinding Machine for almost all grinding purposes like External/Internal and Face grinding as well as for Excentric- / Cam- / Polygone Grinding and even for Thread Grinding * Free programmable CNC System make BWO Model 900 C with many grinding cycles and for easy input of the work-parameters. Graphic support, any many more features. * 3 position wheelhead with 3 Grinding spindles as B-Axis, one with measuring feeler (Z - Position) * MOVOMATIC Measuring Device Model ES 400 for diameter control, Probe head CR 60, to be mounted on table. * MPM Automatic Grinding wheel balancing Device, Dressing devices with diamantflees mounted on table surface and also motorized Diamantroll Profile dresser on table (for thread profiles, etc.) * Workhead and tailstock can be easily moved on table by air cushion. Hydraulic quill on tailstock. * No Coolant Device available ! Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.