Other

Doppstadt Inventhor Typer 6 Shredder

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: Lhedpfx Absv Rgzwsyeh 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: excellent (used), Year of construction: 2022, operating hours: 208 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system Lhjdpexd T Hcofx Abyoh - Paintwork: RAL2011 deep orange Optional equipment: - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides - 7 m rear discharge conveyor - Neodymium overband magnet - 7 m frame for overband magnet Delivery date to be agreed upon

Year of construction: 2014, condition: excellent (used), Mineral Spiral Concentrator to treat pulp streams with a heavy mineral content Lodpfogak Hljx Abyehh Type K8LM5/2 Make: SWMS - South West Metallurgical Services UK Year: 2014 Condition: good, little hours 2 Units available complete documenation available

Condition: used, Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m Lhedpfx Absxx N Dgoyjh - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Year of construction: 2016, operating hours: 6,100 h, condition: ready for operation (used), functionality: fully functional, Terex Pegson Premiertrak 400 2016 year 6100 hours Inlet 1100x700 mmTerex Pegson Metrotrak 900x600 2016 year 6100 hours Lhodpfx Abjxvcdueyjh Inlet 1100x700 mm Engine Scania DC09 CSS range from 0-65 to 0-150 mm Capacity 150-250 tons per hour depend on material Weight 45 tons Fitted with side conveyor Fitted with overband magnet Fitted with belt scale Machine in great working condition, ready for work like NEW

Condition: new, functionality: fully functional, Year of construction: 2010, BRAND NEW SAND WASHING MACHINE. CAPACITY: 100 T/H Ledpfjwr El Asx Abyshh Price as of July 30

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. General Introduction The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: Lhedpfx Aboq Nia Ioyjh - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Keywords Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.

Condition: used, functionality: fully functional, Year of construction: 2016, 🚀 GEDA 500 Z/ZP – OKOMITA DIZALICA / TRANSPORTNA PLATFORMA Rabljena, 2016. godina – potpuno servisirana u GEDA Njemačka - puno novih djelova! Jamstvo: ORIGINAL TVORNIČKO - 12 mjeseci 🏗️ ZA PRIJEVOZ LJUDI I MATERIJALA – PROFESIONALNO RJEŠENJE ZA GRADILIŠTA GEDA 500 Z/ZP je dvostruko rješenje: može se koristiti kao dizalica za materijale ili kao transportna platforma za prijevoz osoba i tereta. Zahvaljujući dvostrukom upravljačkom sustavu, nudi maksimalnu fleksibilnost, sigurnost i brzinu rada. Brzina dizanja do 24 m/min u načinu za materijale i 12 m/min u načinu za prijevoz osoba omogućuje učinkovit i siguran rad i na najzahtjevnijim projektima. Kompaktna konstrukcija, prostrana platforma i mogućnost prilagodbe čine ovaj model idealan za montažu skela i rad na višekatnim objektima. ⚙️ TEHNIČKE SPECIFIKACIJE Ljdpjxvyi Usfx Abyjhh Proizvođač: GEDA (Njemačka) Model: 500 Z/ZP Godina proizvodnje: 2016. Jamstvo: 12 mjeseci (potpuno obnovljena i servisirana u GEDA Njemačka) Puno novih djelova Pogon: 3,0 / 6,1 kW / 400 V Visina dizanja (max): 100 m Nosivost: 850 kg (materijal) / 500 kg (osobe) Brzina dizanja: 24 m/min (materijal) / 12 m/min (osobe Dimenzije platforme: D 1,6 m × Š 1,4 m × V 1,1 m Mast sistem: GEDA UNI-X-MAST Stanje: tehnički i optički – ODLIČNO 🧰 PRIBOR ZA VISINU DIZANJA DO 25 m Pribor za veće visine na upit. Čelični stupovi 1,5 m – 17 kom Sidra za učvršćenje stupa – 6 kom Vodilice za kabel – 6 kom Kabel za visinu dizanja do 50m Sve dizalice su servisirane i obnovljene u Njemačkoj, spremne za rad i isporuku. +++UZ GEDA 500 Z/ZP IDE ORIGINAL TVORNIČKI KONTROLNI LIST ZA ISPRAVNOST DIZALICE+++ 💡 DODATNE INFORMACIJE ✅ Jamstvo 12 mjeseci od dana kupnje ✅ GEDA certifikat kvalitete i sigurnosti ✅ Upute dostupne na hrvatskom, njemačkom i engleskom jeziku ✅ Platforma zakretna 90° – lakši utovar i istovar ✅ Minimalni zahtjevi za prostor i brza montaža ✅ Različite verzije platforme – s vratima i preklopnim mehanizmima za prilagodbu svakom gradilištu 🆕 NUDIMO I NOVE GEDA DIZALICE I KOMPLETNU OPREMU Uz rabljene modele s jamstvom, u ponudi imamo i nove GEDA dizalice, transportne platforme i dodatke: Dizalice za materijal i osobe Okomite i kose građevinske liftove GEDA-STANDARD 200KG, COMFORT 250KG I FIXLIFT 250KG-2BRZINE DIZANJA Sve nove i rabljene obnovljenne GEDA dizalice dolaze s punim jamstvom proizvođača, dostupne za trenutnu isporuku uz podršku i servis u Hrvatskoj. PRVA RUKA – GENERALNI ZASTUPNIK GEDA DIZALICA ZA HRVATSKU VEĆ VIŠE OD 30 GODINA. Specijalizirani za prodaju, najam, servis i obnovu GEDA liftova, dizalica i kompletne opreme.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,550 mm, total length: 13,600 mm, total width: 2,540 mm, total height: 1,550 mm, suspension: air, tire size: 275 / 70 R22.5 – Good Year, color: red, Year of construction: 2024, Color: Red Load capacity: 60,800 kg Extendable Main Features Manufacturer: Faymonville Type: F-S44-1BBY Triple Extendable Flat Bed Chassis number: YAFSR4009S0036724 Year: NEW / Unused Weights/Loading Capacity King-pin load: 28,000 kg Axle load: 12,000 kg Total axle load: 48,000 kg GVW: 76,000 kg Empty weight: 15,200 kg Loading capacity: 60,800 kg Axles Brand Axles: BPW Air suspension All axles with hydraulic steering WABCO braking system with EBS Tires: 275 / 70 R22.5 – Good Year Load index 148/145M Dimensions Length: 13,600 mm Extensions: 7,200mm + 7,400mm + 7,600mm Max extended length: 35,800 mm Loading floor width: 2,540 mm Height: 1,550 mm (+/- 100 mm) Additional Information High resistance metallization of steel construction NATO plug Lashing rings Stake pockets Ledpfov I Dqqex Abyehh Wooden loading floor Mechanical landing gear Electro-hydraulic pump for trailer functions Spare wheel Rear bumper with lights King-pin 2.0” + 3.5″ Central lubrication with 2 BEKAMAX pumps = Further Information = General Information Year of manufacture: 2024 Axle Configuration Tire size: 275 / 70 R22.5 – Good Year Axle brand: BPW Suspension: Air suspension Rear axle 1: Dual tires; Max. axle load: 12,000 kg; Steerable; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Rear axle 2: Dual tires; Max. axle load: 12,000 kg; Steerable; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Rear axle 3: Dual tires; Max. axle load: 12,000 kg; Steerable; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Rear axle 4: Dual tires; Max. axle load: 12,000 kg; Steerable; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Weights Empty weight: 15,200 kg Load capacity: 60,800 kg GVW: 76,000 kg Functional Loading platform height: 155 cm Extendable superstructure: Yes Condition Technical condition: very good Optical condition: very good

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,999 h, Mobile concrete batching plant operating daily SIMI BSA 60, 6 month warranty 4 × 10 m³ aggregate bins Simi mixer 1 m³ / batch of concrete, with two horizontal shafts Lsdpsxl Ea Defx Abyjhh 2 admixture tanks without cement silo The plant can be inspected in Drâmbar, Alba Iulia, Romania.