Used Generator for sale (9,477)

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Hfsdpfx Acoxfrv Eobsg Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: ready for operation (used), Boiler plant for production of steam. Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Working pressure : From 5 bar to 20 bar Hfjdpfoy Av Rdsx Acbog Steam temp 215 degrees C Designed for solid fuel like, wood chips, sawdust, bark

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Hfedpfx Acov Uag Iebsg

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Hjdpfx Aow U N Daecbjfg

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Hjdsyl Nntjpfx Acbsfg

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Hfodpfxsx U Tgmo Acbeg Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period.

Condition: good (used), max. wheel diameter 1600 mm gear width 250 mm max. module 30 min. module 8 range of tooth size 58 mm tooth width 250 mm weight of the machine ca. 42,3 t dimensions of the machine ca. 4,45 x 6,00 m - Cone spacing in mm. for spiral angle 30° minimum: 150 maximum: 800 - Taper angle, in degrees minimum: 5 maximum: 85 - Tooth angle minimum: 0° Hfsdpfx Acju Dbucebjg maximum: 45° - Number of teeth to be cut minimum: 10 maximum: 150 The machine is complete, fully functional and in good condition. Equipment / accessories: - complete set of change wheels - 4 pcs. cutter heads - various milling cutters - Operating instructions in English

Condition: new, functionality: fully functional, fuel type: gas, power: 1,521 kW (2,067.98 HP), output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, 10 pcs in stock =Scope of supply= Genset mtu 12V4000L64FNER, 400 V for operation with Natural Gas. gas train of 116-250 mbar inlet pressure with 1m flexible rubber-metal connecting hose. set of sylomer stripes for genset foundation installation. set of flexible connection for engine coolant circuit with flange connection set of flexible connection for mixture coolant circuit with flange connection Hfodpfx Acey Hcvbsbsg set of exhaust bellows with flange connection and companion flange set Maintenance-free starter batteries, mounted on base frame. MIP (MTU Interface Panel) incl. Black Start option and ECU Remote Control interface =Technical specifications= Time for delivery - in stock Engine type - mtu 12V4000L64FNER Electrical power - 1521 kW Engine speed - 1500 rpm Electrical efficiency - 43.9 % Total efficiency - 88.6 % Alternator type - Leroy Somer LSA 53.2 VL6 Voltage - 400 V Frequency - 50 HZ < 500mg NOx at 5% O2 =Other information= Production country - Germany

Condition: used, Year of construction: 1988, functionality: limited functionality, gear diameter: 320 mm, workpiece weight (max.): 10,000 kg, total height: 2,000 mm, total length: 2,900 mm, total width: 2,000 mm, workpiece diameter (max.): 320 mm, Straight bevel gear machines type 5C267P, made Stanko in 1988 year, completed, need starting works for electric and hydraulic part. Slightly used, mechanical part in good condition. Available for sale two pieces. Price is 35000 Euro for 1 machine. Hjdpfx Asykmdiocbefg

Condition: refurbished (used), functionality: fully functional, Universal Processing System: FESSMANN systems are typically designed for multiple processes, which may include: Drying,Smoking (Hot or Cold),Cooking (Boiling or Steaming),Reddening / Maturing, Roasting / Baking Smoke Generator: The "RZ" model designation often points to a smoke generator unit, which is an essential component of a larger smokehouse or universal system, providing the smoke for the chamber. However, given the full stainless steel structure, it might be a compact, integrated unit. Technical Data: Model: RZ 7 108 Voltage (Main) 380V 3Ph 50Hz (Three-phase) Control Voltage 230V∼ (Alternating current) Motor Power 0.3kWHeating Power 1.1kW Hfjdpfx Asxv Smrocbeg Smoking ClassZH1 216 1.1

Condition: good (used), functionality: fully functional, The VEMAG Smoke Gen Model: 501/E is a dedicated smoke generation unit manufactured by VEMAG ANLAGENBAU. It is designed for industrial use, providing consistent smoke output for commercial smoking and cooking houses. Performance & Control Manufacturer Quality: Produced by VEMAG ANLAGENBAU, a highly regarded name in food processing equipment. High Generation Rate: Capable of a Generation Rate of Up to 250m3, making it suitable for large-volume smokehouses. Reliable Power: Operates using an industrial Operating volt of 400 V / 50 Hz, ensuring stable power delivery for continuous operation. Controlled Power Consumption: Has a Total power of 26 A and a Fuse of 35 A. Operational Benefits Hsdpfsxv Srhjx Acbefg Industrial Connection: Features a Tube Connect of DN125 for robust and secure integration with the smokehouse ductwork. Durable Construction: Built with stainless steel, ensuring longevity, resistance to the smoking process, and simplified cleaning. Excellent Condition: This unit is ready to be connected and put into service, offering reliable smoke generation performance.

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Hsdexlngajpfx Acbofg Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: used, Year of construction: 2003, functionality: unexamined, machine/vehicle number: PAM8025B, This membrane Nitrogen Generator was removed by a factory 3 years ago and by that time it was fully functional. Hedpfx Aey R Sixscbsfg After this is stored.

Condition: ready for operation (used), Year of construction: 1980, Gleason Hypoid cutter Sharpener 13A -1 pcs Milling diameter 89-500 mm Grinding wheel dimensions 305x19x102 mm Feed 0,05-0,18 mm Grinding wheel drive motor - 1800 rpm (60 Hz) - 1500 rpm (50 Hz) Floor space 1240x2310 mm Height 1422 mm Machine weight 4083 kg Hodpfx Ajr Elpvecbjfg Gleason 19 revacicle cutter checking machine - 1 pcs

Condition: used, Year of construction: 2020, machine/vehicle number: T57F0019080055255, fuel type: diesel, power: 65 kW (88.38 HP), motor manufacturer: -, Field of application: Construction Hfedpotr Ivwjfx Acbog Empty weight: 83 kg Generator capacity: 8 kVA Transport dimensions (LxWxH): 0.68x0.55x0.55 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2022, operating hours: 2,017 h, machine/vehicle number: D 22389, fuel type: diesel, power: 791 kW (1,075.46 HP), motor manufacturer: Iveco, Field of application: Construction Empty weight: 1.390 kg Generator capacity: 100 kVA Hfjdpfxetr Iwfe Acbog Dimensions of cargo space: 267 x 113 x 170 cm Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2021, operating hours: 6,670 h, machine/vehicle number: 241431, fuel type: diesel, power: 129 kW (175.39 HP), motor manufacturer: Iveco, Field of application: Construction Hsdpfx Acetr Iw Hjbofg Empty weight: 2.150 kg Generator capacity: 143 kVA Transport dimensions (LxWxH): 2.99x1.1x1.5 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 9,482 h, machine/vehicle number: ESF372661, fuel type: diesel, power: 32 kW (43.51 HP), motor manufacturer: Kubota, Field of application: Construction Empty weight: 1.039 kg Generator capacity: 40 kVA Hfsdpfx Acetr Ix Dsbeg Transport dimensions (LxWxH): 2.45x1.1x1.48 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 3,210 h, machine/vehicle number: ESF407191, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Generator capacity: 105 kVA Transport dimensions (LxWxH): 2.9x1.15x1.71 Hfedpfx Aetr Ixcocbeg Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, machine/vehicle number: K24I440352, fuel type: diesel, motor manufacturer: Cummins, Field of application: Construction Hfjdpfjwfmnxex Acbeg Transport dimensions (LxWxH): 0x0x0 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 340230019, fuel type: diesel, power: 19 kW (25.83 HP), motor manufacturer: Yanmar, Field of application: Construction Hfsdpfxexwitfo Acbeg Empty weight: 700 kg Generator capacity: 20 kVA Transport dimensions (LxWxH): 1.85x0.96x1.52 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, machine/vehicle number: K24I158166, fuel type: diesel, power: 35 kW (47.59 HP), motor manufacturer: Cummins, Field of application: Construction Empty weight: 842 kg Hsdpfx Acsv Uhquebofg Generator capacity: 38 kVA Transport dimensions (LxWxH): 1.96x0.82x1.28 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, machine/vehicle number: J24I439847, fuel type: diesel, power: 101 kW (137.32 HP), motor manufacturer: Cummins, Field of application: Construction Empty weight: 1.890 kg Generator capacity: 110 kVA Transport dimensions (LxWxH): 3.1x1.18x1.95 Please contact PFEIFER GROUP for more information Hedpev Uvq Aofx Acbefg

Condition: used, Year of construction: 2023, operating hours: 1,354 h, machine/vehicle number: ESF407086, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Hfodpfx Aey N I U Iecbsg Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 7,563 h, machine/vehicle number: ESF407077, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Hfodpfx Acsy N Narobog Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Please contact PFEIFER GROUP for more information