Slewing crane
Drehkräne mit Vakum Sauger

Name: Drehkräne mit Vakum Sauger
Brand: Drehkräne
Availability: InStock

Condition

Used

Location

Pleystein

Slewing crane Drehkräne mit Vakum Sauger

Show map

Machine data

Machine type:: Slewing crane

Manufacturer:: Drehkräne

Model:: mit Vakum Sauger

Condition:: used

Price & Location

Location:: Berglerschleife 8, 92714 Pleystein, Deutschland

Call

Details about the offer

Listing ID:: A20301240

Update:: 15.10.2025

Description

• Load capacity 350 kg
• 6 vacuum suction cups, 250 mm diameter, adjustable
• Vacuum lifter can rotate 90° and tilt 90°
• Suction cups with guide tube and electric trolley
• 4 units available, brand new and unused
• Immediately available

IV: + Design Standards
1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards.
2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement.
Giodexnvq Ejpfx Ah Hel

V+ Equipment Inspection and Standards
1. General
Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes.
2. Pre-shipment Inspection
© Equipment suction test
© Equipment pressure holding test
© Alarm system test
© Various control components

• Price on request

The listing was translated automatically. Translation errors are possible.

Documents

20301240-01.pdf

Seller

Last online: Today

Registered since: 2012

50 listings online

Call

Send inquiry

Telephone & Fax

+49 9654 ... show

Fax:

These listings may also fit your interest.

Listing

Vertical flat glass washing machine NEPTUN LV TOP 1600

Diest

7,140 km

Vertical flat glass washing machine
NEPTUNLV TOP 1600

Call

Listing

New 15 kW screw compressor dryer KAESER SK 25 T

Germany

6,672 km

New 15 kW screw compressor dryer
KAESERSK 25 T

€12,950

EXW ONO plus VAT

Call

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Gjdpfx Ajdrc Txsh Hoil Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Visit our store. We always have a large selection of new and used compressors in stock!

See details

Listing

Insulating Glass Production Line Forel 2000

Germany

6,760 km

Insulating Glass Production Line
Forel2000

Call

Year of construction: 1996, condition: ready for operation (used), A Forel multi-pane insulating glass production plant with fixed spacer and Swiggel is available. Glass production options: 2-pane/3-pane, layering: coated/uncoated, insulating glass pane dimensions X/Y min./max.: 400mm x 200mm/2500mm x 2000mm, pane thickness range: 12mm-50mm, total system length: 30200mm. System components: 1) Inlet to the washing machine, 2) Washing machine, 3) Outlet from the washing machine, 4) Place spacer on inlet, 5) Place spacer on outlet, 6) Place spacer on outlet, 7) Inlet assembly station, 8) Assembly station, 9) Outlet assembly station, 10) Inlet roller press (no gas filling press), 11) Outlet roller press, 12) Roller tilting table for removal. Documentation available. On-site inspection is possible. Giedjugv R Ijpfx Ah Hol

See details

Listing

Scerne

6,455 km

Mobile warehouse
Coprikompatt

Call

Condition: new, Mobile sheds are intended to increase the logistical and production capacity of any company, create new covered spaces to be used for logistical solutions such as permanent or temporary storage of goods, creation of new production or service areas, covering loading/unloading areas, vehicle and machinery storage, in all areas of business application. Gsdpfx Ahst Ef T De Hjil

See details

Listing

Częstochowa

6,149 km

Press brake
AMADAITPS III

€5,900

fixed price plus VAT

Call

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Gsdjwq Dpqjpfx Ah Hjil Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

See details

Listing

Glass grinding machine Glasschleifmaschine ZXM mit 9 Spindel

Pleystein

6,611 km

Glass grinding machine
Glasschleifmaschine ZXMmit 9 Spindel

Call

Condition: good (used), Completely overhauled by us Glass grinding machine with 9 spindles for grinding and polishing • Year of manufacture: 2014 • Very good condition • Glass thickness: 3 – 25 mm • Minimum glass size: 80 x 80 mm • Machine length: 6470 mm • Machine height: 2610 mm Gedpfx Aeu Sm H Hsh Hoil • Machine depth: 1110 mm • Weight: approx. 2800 kg • Price on request

See details

Listing

Band sawing Forward Metallkraft BMBS 230 x 280 H-DG

Feucht

6,695 km

Band sawing Forward
MetallkraftBMBS 230 x 280 H-DG

Call

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: - horizontal vice - length stop (600 mm) Gedpfx Ajcuntzsh Heil - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions

See details

Listing

Glas Edging Machine Schiatti Angelo BFP12

Barbing

6,621 km

Glas Edging Machine
Schiatti AngeloBFP12

Call

Condition: new, Year of construction: 2025, Schiatti Angelo BFP12 Double Edger Max. working width: 1.300 - 4.500 mm Processing station with different processing options: 5 / 6 / 8 / 9 / 10 / 11 Spindle - Glasthickness 3-35 mm - min. working width 160 mm - Max. weight: 480 KG - Automatic thickness adjustment via SPS - Tanks for waste water collection Gsdpfjwd Hbijx Ah Hjil - Inkl. turning station

See details

Listing

UniControl 12 WEINIG UniControl 12 - UniTec + UniVar

Trondheim

6,910 km

UniControl 12
WEINIGUniControl 12 - UniTec + UniVar

€25,000

EXW fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 Giodpfxsmgc I Nj Ah Hel - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

See details

Listing

Robot welding cell with rotary table KUKA + Dalex + HS KR 150 R2700 extra +

Ennepetal

6,978 km

Robot welding cell with rotary table
KUKA + Dalex + HSKR 150 R2700 extra +

Call

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Gsdpfx Aenr E Eneh Hsil Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Plant can still be visited in operation.

See details

Advertise here