Used Säulendrehkräne Mit Vakum Sauger Slewing Crane for sale (11,546)

Condition: used, • Load capacity: 350 kg • 6 suction cups, 250 mm diameter, adjustable • Vacuum suction cups can rotate 90° and tilt 90° Crjdpfx Aioxnvq Es Seh • Suction cups with guide tube and electric traversing carriage • 2 units available, new and unused • Immediately available IV: + Design standards 1. The design of the system strictly complies with the European CE standard EN 13155: 2016, the American ASME (Mechanical Engineering Association) B30-20-2006 standard, and the German UVV I8 standard, with the most important design parameters exceeding the aforementioned standards. 2. Safety factor: The main structure has a safety factor of 4.0, the safety vacuum level is 65%, and the standard is 85%, which is 20% above the safety standard. V+ Equipment testing and standards 1. General matters Check whether all the materials are complete, whether the exterior of the equipment is painted or scratched, whether the suction cups are damaged, and whether the tube is damaged. 2. Points checked before leaving the factory © Suction test of the equipment © Pressure retention test of the equipment © Alarm test © Various control components • Special price: €4,900

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. Cedpeyq Rdyjfx Ai Sorh The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Cjdpjz Ipdvefx Ai Sjrh Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Credpjz Ehfasfx Ai Seh Feed rate: max. 15 m/min Water-cooled guides Drive – Gearbox The system has demonstrably only been in operation for 10 years.

Condition: excellent (used), Year of construction: 2022, Column-slewing crane, Vetter, 1.500 kg, 6 m jib, 6 m high – unused: Price ex works: now only €9,950 instead of €13,950 (net)! Manufacturer: Vetter Type: Meister M Year of manufacture: 2022 Load capacity P: 1500 kg M15-6.0 Column-slewing crane designed according to the EC Machinery Directive, the applicable standards of EN 13001, and the VDE regulations, for outdoor use at 4 Beaufort (20 – 28 km/h; moderate breeze). Identification No.: 50010400 EN 13001 HC2 S3 HD2 Slewing range SB: 360° ∞ Max. permissible lifting device weight Gk 180 kg Max. permissible lifting device speed VH 16 m/min Outreach A 6000 mm Lower edge of jib UK 6000 mm Overall height B 6470 mm Bolt circle diameter DL 630 mm Flange outer diameter DF 710 mm Girder flange width F 180 mm Approach dimension Aa 250 mm Approach dimension Ai 915 mm Support strut length B1 1540 mm Max. vertical force Vk max. 32 kN Max. moment Mk max. 11575 kNcm Weight 1756 kg Operating voltage 400 V Credpfx Asyhxk Hoi Seh Frequency 50 Hz Control voltage 24 V Paint finish: Tube column for outdoor use (corrosivity category based on C3), steel grit-blasted and coated with a paint finish in daffodil yellow RAL 1007, target layer thickness 120 μm. VETTER-AnchorFix system, consisting of anchor bolts, nuts, washers, lock nuts, and steel template. Bolt circle (DL) ø 630 mm. Foundation edge length (G) 2400 mm × 2400 mm, foundation depth (Gt) 1000 mm. Flat cable with cable trolley, C-rail, and tension arms for attachment to the girder. Short weather protection canopy, size 2, can be attached to the crane jib to shelter the lifting device in the rest position. Made of a sturdy, hot-dip galvanized steel tube construction with weather-resistant, plastic-coated tarpaulin covering, color rapeseed yellow RAL 1021. Absolutely necessary for outdoor operation. Can be used up to wind force 7. Dimensions (length x width x height): 1320 x 1520 x 1042 mm. Electric chain hoist, manufacturer VETTER, type electrolift® SiXX Designation SiXX8F Drive group FEM 9.511 2m Drive group ISO M5 Number of load strands 2 Load capacity 1500 kg Lifting height 5351 mm Overall height 649 mm Lifting speeds 4 / 1 m/min Lifting motor 1.45 / 0.36 kW Duty cycle 40/20% Weight 65 kg Protection class IP55 Electric travel unit, type SiXX-EF-22-200 Travel speed 24/6 m/min Travel motor 0.2/0.05 kW Duty cycle 40/20% Weight 19 kg Flange width 180 mm Detailed specifications and technical drawings are available upon request as a PDF. Former new price: €18,436 (net) Condition: very good (this crane is new and unused – a classic mispurchase) Available: immediately Location: 30419 Hannover

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. Credpfx Aozt Ai Eji Seh 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya10, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Cjdpfx Aiez Ipunj Ssrh Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: like new (used), Year of construction: 2009, Double-jib slewing crane, like new, very little used. Hardly any operating hours recorded in the documentation, as the company ceased assembly after a short period. Comes with inspection and UVV certification documentation. Credez Dup Ajpfx Ai Seh

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2645 /4434, Technical specifications: 1 Schmalz column-mounted swing jib crane, model NL 50KG, year of manufacture 2018 Crane is available in quantities of 2!!! Load capacity at full extension: 50 kg Schmalz vacuum unit with Jumboflex 50 kg suction lifter (quick-change system for additional workshop tools) Overall height: approx. 2.52 m, outreach: approx. 1.8 + 1.25 m, lower boom: approx. 2.35 / 2.5 m Base plate: 30 x 30 cm Total weight approx. 300 kg including vacuum unit Connection to 400V 16A, swivel range 270 + 90° Crsdpfx Aozvrn Aei Seh Crane is disassembled and packed on a pallet Item location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold Very good condition - almost new. See pictures Shipping via freight forwarder or collection by appointment.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer Csdpfxewcgr Eo Ai Ssrh In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: good (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 12 28 895, total height: 2,500 mm, total length: 3,000 mm, total width: 1,000 mm, load capacity: 400 kg, main lifting speed: 8,000 mm/min, fine lifting speed: 33 mm/s, throat depth: 2,800 mm, working height: 2,500 mm, Technical specifications Manufacturer: STAHL Fördertechnik GmbH Type: T202 Load capacity: 400 kg Year of manufacture: 1995 Supply voltage: 380 V / 3-phase / 50 Hz Lifting speed: 8 / 2 m/min Motor power: 1.3 / 1.1 kW With pendant control, chain and hook Complete with column-mounted swivel arm Credpjzkam Asfx Ai Ssh STAHL lifting equipment is reliable and durable, even in industrial environments. The T202 model, a 400 kg chain hoist, is known for its lifting speed of 8/2 m/min. Condition Used, industrial equipment in good condition. Sold in the complete condition as shown in the pictures. Price: 1,000 EUR STAHL 400 kg Electric Jib Crane with Electric Chain Hoist – 1,000 EUR Description For sale is a STAHL electric jib crane complete with an electric chain hoist, pendant control and lifting chain. The unit is in good used condition and is ready for operation. STAHL is a well-known German manufacturer of high-quality industrial lifting equipment, recognized for its reliability and long service life. Technical Specifications Manufacturer: STAHL Fördertechnik GmbH Model: T202 Load Capacity: 400 kg Year of Manufacture: 1995 Power Supply: 380 V / 3 Phase / 50 Hz Lifting Speed: 8 / 2 m/min Motor Power: 1.3 / 1.1 kW Electric Chain Hoist Pendant Control Included Lifting Chain and Hook Included Complete Jib Crane Assembly Condition Good working condition Complete unit Ready for installation Industrial quality German equipment Included Electric chain hoist Jib crane Pendant control Lifting chain Hook Price: €1,000 Location: Hungary Seller: Variflux Kft.

Condition: good (used), functionality: fully functional, Year of construction: 2001, total length: 8,000 mm, total width: 5,000 mm, load capacity: 1,000 kg, -WR 144- Codjz E D U Rjpfx Ai Sjrh For sale is a slewing crane system from the manufacturer Spiess, equipped with a Demag chain hoist. The slewing crane system can be inspected on-site (42781 Haan). Technical data of the slewing crane system: Manufacturer: Spiess Maximum load capacity: 1000 kg Length of the supporting beam at the end face: approx. 8000 mm Length of the double supporting beam, parallel: approx. 5000 mm each Year of manufacture: 2001 Technical data of the chain hoist: Manufacturer: Demag Maximum load capacity: 1000 kg Speed settings: 2 Hook travel: approx. 3200 mm Control switch type: DSK 3 DP2

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN4462 / 4520, 1 Schmalz – Column-swiveling crane with extension + Vacumaster Comfort Window Crsdpfjzvrcajx Ai Seh The crane is available in 2 identical units!!! Load capacity at full extension: 200 kg Schmalz swiveling crane SK-KZG-CON (extending crane) load capacity 200 kg with suction lifter VM-Comfort-H-CON Suction cup diameter: 37 cm! Load capacity: 150 kg Year of manufacture: 2018 Overall height: approx. 3.35 m, reach: approx. 3.1 m + 1 m extension = 4.1 m Distance from the base to the upper boom: approx. 2.63 m Distance from the base to the upper boom: approx. 2.42 m Hook height, chain hoist: approx. 2 m Maximum height of suction lifter in the center: 1.7 m Base plate: 50 x 50 cm Total weight: approx. 400 kg Connection: 400 V, 16 A, swiveling range: 270° The crane is disassembled and packed on a pallet. The item is located in 75053 Gondelsheim. Only the crane system shown in the pictures is being sold. Very good condition, almost like new. See pictures. Shipping by freight forwarder or collection by appointment.

Condition: used, functionality: fully functional, Year of construction: 1976, machine/vehicle number: ROD109, 1 Demag KBK I wall-mounted slewing crane, 500 kg load capacity / lifting capacity Codpfx Aioxmuuyo Sorh Jib length 2 m, 500 kg load capacity with Demag DC chain hoist, load capacity 500 kg (year of manufacture 2007) Weight incl. wall bracket approx. 150 kg Complete with chain hoist, cable trolley, travel carriage, and small parts Slewing range 270° Item location: 75053 Gondelsheim The system is fully dismantled and immediately available Shipping by freight carrier or collection Please enquire about shipping costs according to postal code

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: CR2313, 1 HOVA SSK Column Swivel Crane NL 120 KG Load capacity at full extension: 120 KG / 0.12 tons Height: approx. 5.15m, upper arm length: approx. 4.45m Reach: approx. 6m, hook height: approx. 4.1m Base plate: 75x75cm Total weight: approx. 400 Kg With 500Kg Hadef chain hoist (2 lifting speeds) Connection: 400V 16A, swivel range: 270° The crane is disassembled and available immediately Item location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold Very good condition - almost new, see pictures Shipping via freight forwarder or collection by arrangement Csdpszgbf Sjfx Ai Sjrh

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: AGH634, 1x Mobile column-mounted slewing crane, mobile gantry crane Type WK1 - Year of manufacture 2014 Load capacity at full reach: 250 kg / 0.25 tonnes Overall height: approx. 3.7 m, Reach: approx. 3 m Hook height: approx. 3.2 m, Lower edge of boom: 3.5 m Base size: approx. 110 x 110 cm Column with counterweight incl. ABUS 250 kg chain hoist, cable carrier and accessories Total weight: approx. 3350 kg Connection to 400 V, Slewing range: 270° Very good condition, fully functional Item location is 75053 Gondelsheim Only the crane system shown in the pictures is being sold. See pictures Crodpezy D D Rofx Ai Soh Shipping via freight forwarder or collection

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, Coulmn-mounted slewing crane | Brand: Konecranes | Type: M50-7,0 Year of manufacture: 04/2007 The crane can be inspected at the factory by prior appointment. Condition: Barely used (used for 1–2 years solely for light assembly work). Before disassembly, an acceptance inspection will, of course, be carried out / an inspection report drawn up. TECHNICAL SPECIFICATIONS: - Capacitiy: 5 tons - Jib length: 7.000 mm Credpfx Aoz Ertuoi Sjh - Height: 7.360 mm - Swivel range: limited - Permissible weight of hoist (with counterweight): 0,6 tons - Max. hoisting speed: 16 m/min - Foundation with anchor bolts - Operation voltage: 400 V, 50 Hz - Control voltage: 48 V - Electronic carriage - Documentation - CE marking No guarantee is given as to the completeness or accuracy of the technical specifications and specifications. – Subject to prior sale –

Condition: like new (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: EM109, 1x Mobile, pivoting column slewing crane, traveling crane Credpfx Aiszlqbmj Soh Type Kaltenbach WK-SL - Year of manufacture 2019 Load capacity at full outreach: 600 kg / 0.6 tons Overall height: approx. 4.4 m, Outreach: approx. 3.1 m Hook height: approx. 3.4 m, Lower edge of boom: 3.85 m Base dimensions: approx. 110 x 110 cm Column with counterweight incl. ABUS 600 kg GM chain hoist, cable carrier, and accessories Total weight: approx. 5000 kg (counterweight: approx. 3300 kg) Connection via CEE plug to 400 V, slewing range 270° Very good condition, almost new, fully functional. Item location is 75053 Gondelsheim Only the crane system shown in the pictures is being sold. See pictures. Shipping via freight forwarder or collection.

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: GP55/179, 1 Vetter wall-mounted slewing crane, 500 kg load capacity / lifting capacity Crane available 2x!!! Type PW2.5-5.5 Jib length approx. 5.5 m, load capacity 500 kg - 0.5 t With chain hoist, load capacity 500 kg (2 lifting speeds) Total weight approx. 500 kg Year of manufacture: 2001 Codpfx Aey D D Hcoi Sorh Complete with wall bracket, jib arm, chain hoist, cable trolley, end carriage, and small parts Slewing range approx. 180° Item location: 75053 Gondelsheim Unit is fully dismantled and immediately available Fully functional condition See pictures Shipping by freight carrier or collection Please inquire about shipping costs according to postal code.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 152-026710, overall weight: 3,000 kg, total height: 5,593 mm, total width: 1,340 mm, load capacity: 5,000 kg, power: 4.63 kW (6.30 HP), main lifting speed: 4,000 mm/min, fine lifting speed: 12 mm/s, throat depth: 4,000 mm, working height: 4,500 mm, operating hours: 20 h, Equipment: documentation/manual, 5 t pillar-mounted slewing crane with electric hoist and electric slewing drive Manufacturer: ABUS Kransysteme GmbH Type: VS 660 pillar-mounted slewing crane with electric chain hoist / wire rope hoist GM 1000.5000 H-162.41.6000.6.E130.20 Year of manufacture: 2023 Serial No.: Crane: 152-026710 Trolley: 250-123870 For sale is a like-new pillar-mounted slewing crane with a lifting capacity of 5,000 kg and a reach of 4,000 mm. The system was put into operation at the end of 2023 and has only been used very little. According to the available remaining useful life calculation, only 20 operating hours have been recorded up to April 2025, resulting in a remaining reserve of approximately 1,598 hours or a projected remaining useful life of over 30 years. The crane features an electric slewing drive, an electric trolley, and a two-stage hoist. Operation is conveniently performed via a pendant control. The system is equipped with a load indicator system (LIS-SV), upper and lower hoist limit switches, and the associated inspection and conformity documents. Scope of supply: * Complete pillar-mounted slewing crane * Electric slewing drive * ABUS trolley * ABUS wire rope hoist * Load hook 5 t * Crane inspection book * Declaration of Conformity * Remaining useful life calculation * Existing technical documentation Condition: Used, very good condition, low operating hours, regular inspection records available. System is visually and technically well-maintained. Photo of the assembled system is available. Location: Dresden Crodpfxozd Sqao Ai Ssh Loading: Loading onto a suitable transport vehicle is included in the purchase price. Inspection: An inspection of the system is expressly desired and possible by appointment. Technical documents and further images can be provided upon request. Subject to prior sale and errors. * Lifting capacity: 5,000 kg * Reach: 4,000 mm * Crane type: VS 660 * Pillar diameter: 660 mm * Underside of boom: 4,983 mm * Hook travel: 6,000 mm * Crane classification: H2 / B3 * Hoist motor group: 2m / M5 * Operating mode: Indoor operation * Slewing drive: electric, two-stage * Slewing speed: 0.15 / 0.60 rpm * Hoisting speed: 0.7 / 4 m/min * Trolley travel speed: 5 / 20 m/min * Operating voltage: 400 V / 230 V, 50 Hz * Total connected load: 4.63 kW * Total current consumption: 12.07 A * Load indicator system: LIS-SV * Hook: Single hook DIN 15401, 5 t * Weight of boom: approx. 869 kg * Weight of pillar: approx. 872 kg * Weight of trolley: approx. 356 kg * Total weight of system: approx. 2,100 kg

Condition: used, functionality: fully functional, Year of construction: 1986, machine/vehicle number: LS20, 1 ABUS LW wall-mounted slewing crane 250 kg load capacity / lifting capacity Jib length 3m + 0.6m extension (removable), 250kg load capacity Crsdpfx Asywfhusi Soh With Abus Hitachi chain hoist, load capacity 250kg Weight incl. wall bracket approx. 150 kg Complete with chain hoist, cable drag, trolley, and small parts Slewing range 270° Item location: 75053 Gondelsheim System is completely dismantled and immediately available Shipping by freight forwarder or pickup Please inquire about shipping costs by postal code

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: NOHxx+, 1 Vetter / Demag Wall-Mounted Slewing Crane 500 KG Load Capacity Type PW5-5.0 Outreach approx. 5m, 500KG (0.5t) payload with Demag chain hoist, 500KG capacity (2 lifting speeds) 10 cranes available!!! Cjdsxmfayepfx Ai Sjrh Total weight approx. 350 kg Year of manufacture 2004, with inspection book Complete with wall brackets, jib, chain hoist, cable trolley, carriage, and small parts Slewing range approx. 180° Item location: 75053 Gondelsheim System is completely dismantled and immediately available See pictures Shipping via freight forwarder or pickup Please inquire about shipping costs by postal code

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TD2002/0297, 1 Demag KBK II wall-mounted slewing crane, 250 kg load capacity / lifting capacity Outreach 5m, 250 kg load capacity with Demag DC chain hoist, 250 kg load capacity Weight incl. wall bracket approx. 300 kg Complete with chain hoist, cable track, trolley and small parts Slewing range 270° Item location is 75053 Gondelsheim Crodpfx Aiezv H T Te Soh System is completely disassembled and immediately available Shipping via freight forwarder or pickup Please inquire about shipping costs, specifying the postal code.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: HZ379, 1 Vetter US1.25-4.9 Column-swivel crane, NL 125 KG Load capacity at full extension: 125 KG / 0.125 tons Height: approx. 4.4 m, upper carriage boom: approx. 3.62 m Reach: approx. 4.9 m, hook height: approx. 3.2 m Cjdpfx Aoy Udp Eei Serh Base plate: 55 cm Total weight: approx. 400 kg Including 125 kg Demag DC chain hoist (2 lifting speeds) Connection to 400V 16A, swivel range: 360° Crane is disassembled and immediately available Item location is 75053 Gondelsheim Only the crane system shown in the pictures is being sold Very good condition - almost like new, see pictures Shipping via freight forwarder or collection by appointment

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: NOH388/45, 1 Vetter / Demag wall-mounted swivel crane, 250 kg payload / lifting capacity Type AW2.5-7.0 Reach approx. 7m, 250 kg / 0.25 t payload with Demag DC chain hoist, 250 kg payload (2 lifting speeds) Crane available in quantity 2!!! Total weight approx. 450 kg Year of manufacture 2004, with inspection certificate Complete with wall brackets, jib, chain hoist, cable carrier, undercarriage and small parts Swivel range approx. 180° Item location: 75053 Gondelsheim System is completely disassembled and immediately available See pictures Csdpfexmd Rdsx Ai Serh Shipping by freight forwarder or collection Please inquire about shipping costs based on your postal code.