Thread rolling machine

E.W.Menn GW63

Condition: used, Year of construction: 1979, functionality: fully functional, thread length: 77 mm, overall weight: 2,268 kg, workpiece diameter (max.): 8 mm, type of input current: AC, Vibratory Bowl Variable Speed Pulley Used #10 Dies Hsdpfxoztr Nus Airjw

Condition: new, Year of construction: 2024, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, total length: 7,600 mm, total height: 3,000 mm, total width: 2,650 mm, overall weight: 14,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, DYAS 3 BDC CNC Beam Profile Machining Center Hodsgbdpkepfx Airow Operating Range for Section Min. 200 x 80 mm / Max. 1200 x 500 m Operating Range for Length Min. 2000 mm / Max. 12000 mm (Gross: 12500 mm ) Drilling Head (Spindle) 3 Spindle Speed 50-4000 (stepless) rpm Spindle Power 22 Kw Spindle Torque 280 Nm Tool Changer 6 for each spindle , total 18 Tapping Capacity M10-M30 Bandsaw (Optional) Cutting Speed 20-100 m/min / Mitering Angle +60°/-45°

Condition: new, Year of construction: 2024, shaft length under head: 80 mm, thread length: 55 mm, travel speed (max.): 480 mm/min, THREADING MACHINE E.W. MENN GW63 Refurbished as new acc. to CE Stand. Completely overhauled. Hjdst Uucaepfx Airow New Guides, vibrator, new vibrating evacuation. New electrical system with Inverter and PLC M8x80/55 mm. 480 ppm. Thread diameters (min./max.): 3 - 8 mm. Dies length: 115/130 mm. To be viewed and tested at HBR srl - Calolziocorte (LC)

Year of construction: 2003, condition: ready for operation (used), A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026. Hedpfx Aijygw Sverew

Condition: used, functionality: fully functional, Wohlenberg 44 FS 50 automatic three-knife trimmer. Complete with accessories. Hjdpfxjxdm Dbe Airjw

Condition: good (used), 50-position filler with crown cap closure. Hedpfsvq Suiox Airew Used in a winery for filling wine into 1L glass bottles

Year of construction: 1988, condition: good (used), Carlo Salvi 1 die 2 blow Model 780/SV Maximum Cutoff dia.mm: 6,35 Hsdpfx Aehrdmxoirow Max. Cutoff length mm: 97 Max. K.O. length (die side) mm: 80 Max. Speed, pcs, per minute: 360

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe Hedpfx Ajyuqacsirsw YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Hjdpfx Aouz If Noirsw Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: PP120/40, Hot Wall Pulsed Plasma Nitriding Furnace (tandem with 2 bases) Control system was refurbished in 2018 Furnace Model : Plateg PP120/40 Loading Dimensions Diameter : 1000 mm Height : 1250 mm Max. Load Weight : 1000 kg (gross) Hodpfx Aiewmfyvjrow Plasma Power : 40 kVA Heaters Power : 3x13,5 kW, (3 zones) Electrical Connection : 400V 3 phase 50 Hz