Used Bent component manufacturing for sale
Catalog No. : 4564
Bu3rym8ni
Type: 208
Producer: ROBOMAC
Made in: 2006
Characteristic:
Control system: Numalliance
Number of hours: 25955
Wire diameter: 6 mm
Weight: 3000 kg
7
Steel grade - 700N/mm2
Wire Diameter - singl strand 6 - 16 mm
Speed - max. 120m/min.
Bending Speed - ma. 1730*/sec.
Bending agle - 0 - 180 *
Bktjql98
Weight - 3500 kg
Operation Voltage - 3x400V/50Hz
Connected Load - 24 Kw
Avarage Power Consumption - 5-7 Kw
Hand Fuse - 63 Amp
Air Pressure - Max. 8 bar
Tolerances - Side Lengths +/-1mm/m
Angles +/- 1*
Bars +/- 1mm /m
7
equipped with:
1 slide feeding system right hand side
1 eccentricpress 250 kN
4 standard slide units
1 narrow slide unit
1 cam shaft
working range:
wire diameter range: 0,5 - 5,0 mm
stripmetal width: max. 40 mm
B3mo3aggq0
feeding length: up to 320 mm
outout: up to 132/min
1
wire diameter 0,5 - 3,0 mm
width of band 40 mm
number of slides 4
Gmay7nm
10
Wire from 1,5 to 6 mm . Wire feeding - hydraulic 500 mm . machine can work vertically and horizontally
Bk3wshbc7d
15
Make:Macsoft
Type:F413
Year:1999
Specifications
B9gshwulhz
Metric US Standard
There are no specifications for this machine (yet).
Dimensions (Estimate)
Height
2500 mm
Width
2500 mm
Length
6000 mm
Weight
4500 kg
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual term...
7
Drive 4kW, Capacity + Stroke: Cam 8to + 15mm / Eccentric 10to + 14mm / knuckle-joint 20to + 8mm / twin-point 25to + 16mm (option 22mm), cutting length 400mm, mid-ram stroke 52mm, bending capacity + stroke standrad/slim-slide 8to + 95mm/4to + 70mm, tonge-retraction up to 320 x 40mm (option: 440 - 520 x 70mm), roll retraction: max. 1.000mm, cross retraction: max 40 x 100mm, winding device: max 6 winds, with peripheral equipment, de-coiler and full enclosure, LxWxH, ca. 5,5x2x2m, weight, ca. 5to. L...
4
Bihler Mach05 multislide punching and forming machine. Equipped with 4x forming slides and a tooling to produce hanger hook. Max width of strip 40 mm. Max wire diameter 5 mm. Standard feed length 200 mm. Max operating speed 450/min.
Fn2wmdp
4
Main drive motor: 400 V, 055 kW, 2800/min
Thread dimameter range: M 1- M 6
Spindle stroke: max: 15 mm
Bdatiqrnpx
Roduction rate: max. 120/min
1
wire diameter range 0,5 -5,0 mm
2rrlqe
width of band max 70 mm
feeding length max 320 mm
output pieces/min max 132
number of slides 5
7
immediately ready for work
G8wilrapy
12
Make:Macsoft
Cynuo8lw
Type:F412
Year:1995
Specifications
Metric US Standard
There are no specifications for this machine (yet).
Dimensions (Estimate)
Height
2000 mm
Width
2500 mm
Length
6200 mm
Weight
4000 kg
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms...
6
Used automatic stirrup bender, excellent condition
Bnrwnhkkxm
3
Bihler Mach05 multislide punching and forming machine. Equipped with 3x forming slides and an eccentric press. Max width of strip 40 mm. Max wire diameter 5 mm. Standard feed length 200 mm. Max operating speed 450/min. Ready to work condition.
Fh382s2
7
Wire diameter range: 2,0 - 6,0 mm
Kf0pvj8j
Wire feeding length: unlimited
Wire feeding speed: max. 80 mtr./min
Bend back clearnace: max: 1.000 mm
Weight: 4.000 Kg.
*complete with Wire pay-off WAFIOS AHL 41*
wire diameter range 0,5 -5,0 mm
width of band max 70 mm
Ehekozn
feeding length max 320 mm
output pieces/min max 132
number of slides 4
4
equipped with:
1 Right hand feeding system
1 Eccentricpress 250 kN
Bd3znn28s2
4 Standard slide unit
1 Narrow slide unit
working range:
wire diameter range: up to 6,0 mm
stripmetal width: up to 80 mm
feeding length: up to 520 mm
output: 10 - 250/min
3D - CNC
wire diameter 5-12 mm
feeding length unlimited
Puc9fm
8
equipped with:
1 pce. Eccentricpress 70 kN
4 pcs. Standard slide units
1 pcs. Narrow slide unit
3l38cp0n
working range:
wire diameter range: 0,5 - 3,5 mm
strip metal width: up to 32 mm
feeding length: up to 170 mm
output: up to 250/min.
dia. range 0,5-2,5 mm
width of band 50 mm
feeding length 170 mm
number of slides 5
Bexokwn9ey
punching power 5 to
output - pieces/min 225
3
Feeding system for welding nuts
M 4 - M 16
Pesej
1
dia. range 5 mm
width of band 40 mm
feeding length 500 mm
stokes per minute 200 1/min
Gwclok
5
wire diameter range: 1,8 - 5,0 mm
ring diameter range: 80 - 600 mm
3sbutv8b
wire feeding length: 0 - 10.000 mm
output: max. 30 rings/min
welding capacity: 10 kVA
1
dia. range 1-4 mm
width of band 20 mm
output pieces/min 80-150
feeding length 240 mm
Bexoljqkm0
2
welding capacity: max. 70 kVA
Bdath7pchv
1
wire diameter 4-10mm
E299nsl
feeding length oo
speed - meter/min 35-72
4
wire diameter range: 2,5 - 6,0 mm
wire feeding length: unlimited
8cnqjbl9j
wire feeding speed: up to 36 mtr./min
angle of bending: 0 - 340°
1
for rings
Bhhczzddma
dia. range 1,0-5,0 mm
ring diameter 100 - 600
feeding length 2.000 mm
output pieces/min 10 - 120
6
wire diameter range: 1,0 - 5,0 mm
ring diameter range: 80 - 600 mm
wire feeding length: max. 10.000 mm
output: 12 - 30 rings/min
welding capacity: max. 10 kVA
Haqht7j
*with annealing unit*
3
wire diameter range: 1,0 - 5,0 mm
Lktj9
ring diameter range: 100 - 600 mm
wire feeding length: max. 2.000 mm
output: 10 - 120 pcs./min.
2
wire diameter range: up to 4,5 mm
stripmetal width: up to 35 mm
Bhn9ttynu7
feeding length: up to 250 mm
output: up to 160/min
8
equiiped with:Equippment:
1 Slide feeding system right hand side
1 Eccentricpress 250 kN
4 Standard slide units
1 Narrow slide units
Working range:
wire diameter range: 0,5 - 5,0 mm
strip metal width: up to 70 mm
feeding length: up to 320 mm
Bafqfls8
output: up to 132/min.
4
equipped with:
1 pce. Feeding system right hand side
1 pce. Cam press 25 kN
4 pcs. Slide units
Working range:
wire diameter range: 0,5 - 2,5 mm
stripmetal width: max. 32 mm
feeding length: max. 170 mm
Danrcitfk
output: max. 225/min.
5
wire diameter range: 2,0 - 6,0 mm
Ee7eh3d2e
wire feeding length: unlimited
wire feeding speed: max. 70 mtr./min
bend-back clearance: max: 600 mm
9
equipped with:
1 Feeding system right hand side
3 press units of 180 kN/each = total press capacity 540 kN
working range:
wire diameter range: up to 10 mm
stripmetal width: up to 100 mm
Ptu9r
feeding length: up to 250 mm
output: up to 135/min
Used Bent component manufacturing
Search Machineseeker now with more than 2,00,000 used machines:This may be of interest to you
Morlock Motors official partner of Machineseeker and Truckscout24
Olympic Games: Machineseeker sponsors Team Germany
How to receive 100% of our e-mails
