Electric motor 75 kW 2970 rpm

Eco-Air AM 280SC2

Condition: like new (used), Manufacturer: Flender Type: K2S-2,5 Backstop: Yes Power: 78 kW Ndodog Stz Ajpfx Aiyea Ratio: 44,16:1 RPM in/out: 1.400 / 31,7 Shaft ø in: 65 mm Shaft ø out: 140 mm

Year of construction: 2009, condition: used, Mepac heavy duty vertical bagging machine for bulk productions. Nedpoxt Ib Hjfx Aiyoda

Condition: good (used), Year of construction: 1998, High-performance shredder with 1.2 m rotor width Large rotor diameter of 368 mm with 64 blades 37 kW motor Engine and gearbox replaced 6 years ago Ndedpfjxwwvuex Aiyja

Condition: like new (used), Year of construction: 2019, operating hours: 180 h, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 1,300 mm, type of input current: AC, input voltage: 400 V, power: 10 kW (13.60 HP), SOEST Universal Surface Line for oiling, staining, lye treatment, patination, etc. Primarily intended for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two pad holders, and an additional two brushes, for distributing, working in, or patinating surface media in the pores and/or also for removing, distributing, and working in depending on the desired surface effects. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four replacement brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface finishing line is built for professional industrial use and is configured with a full set of equipment. A considerable amount of accessories for the system, such as extra rollers and cleaning machines, is also included (see photos!). Very robust construction, all motors frequency-controlled (Siemens). Speeds are steplessly adjustable for both forward and reverse operation. Maximum workpiece width is approx. 410 mm. The system is in very good condition, with little use—only approx. 180 operating hours—so it can be described as as-new. This surface processing line was only used as a backup line in parquet production and only for specific surface techniques, which explains the low operating hours (used sporadically from 2019 to 2022). In 2023, our company downsized and the system has been stored ever since or is immediately available, and therefore remains in nearly brand-new condition! This system is no longer used in our facility and is therefore being sold. The new price for this line was approx. €87,000 in 2019; the current selling price is negotiable! Inspection of this surface line is possible by appointment. Nodpfx Aijyaiafjysda If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video serves only as an example video of a similar system configuration!)

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, helical gearmotor -Type: R97/II2GD EDRN160L4/3GD/TZF/AL i18.24 -Speed: 1474/81 rpm at 50 Hz, see photo type plates -Power: 15 kW -Shaft: Ø 60 x 120 mm Nedpfx Aiet Drkysysda -Protection class: IP54 -Dimensions: 970/400/H370 mm -Weight: 231 kg

Condition: good (used), Year of construction: 2008, Universal machining center Machine type: DMG DMU 60 monoblock Control: Heidenhain iTNC 530 Year: 2008 Available after: sofort / now SPECIFICATIONS Travel X-Axis: 730 mm Y-Axis: 560 mm Z-Axis: 560 mm B-Axes: ° C-Axis: 0,001° Amount of controlled axes: 5 Spindle speeds: 12.000 rpm Tool: SK 40 Toolchanger Tool capacity: 60 NC rotary table: Ø 600 Table size: 1.000 x 600 mm Max. Table Load: 500 kg Equipment Chip conveyor Internal cooling: bar paper band filter Caliper: Heidenhain TS 649 Roto Clear Tool measurement Ndodpfxjziy Iqo Aiyja Chip rinsing pistol Oil mist separator Working mode: 4

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Model -WL6S Ndedpfx Aijivpttoyoa Main motor -22kw

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume. Njdpfx Aijqmi Irsyoda

Year of construction: 2002, condition: reconditioned (used), Fully automatic tenon and mortise system: Double-Pack type with automatic feeding with multiple cross-cutting saw with stacking system Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with 10 mm tenon size: hardwood 120 cm² softwood 150 cm² Tenon design: vertical and horizontal Adhesive type: PVAC white glue, two-sided adhesive application Electrical power: Connection voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tenon length / optional wood cross-section and adhesive type can still be adjusted. Performance: 6 milling stations/min Working height: 960 mm Table width: 600 mm Adhesive application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (on both sides of the Ndedpfx Aeg D Ugkeiyea

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Ndodpfxjyy A Iqe Aiysa Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...