Surface grinders ELB SWBDE 12 SA 1998

ELB-Schliff

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 52.362, input voltage: 400 V, Increased Sales Pressure – therefore, no minimum price & guaranteed sale to the highest bidder! TECHNICAL DETAILS Grinding length X-axis: 1,000 mm Grinding width Z-axis: 600 mm Grinding height Y-axis on worktable: 500 mm Grinding height Y-axis on magnetic chuck: 410 mm Table load capacity on worktable: 1,000 kg Table load capacity on magnetic chuck: 620 kg X-Axis Guide system: Linear guideways Lubrication: Grease, automatic Drive element: Ball screw Drive motor: AC servo motor, variable speed Cgjdpfxey A Ipfe Aa Not Measuring system: Absolute, rotary encoder Resolution: 0.001 mm Travel: 1,190 mm Feed rate: 0.01 - 30 m/min Y-Axis Guide system: Linear guideways Lubrication: Grease, automatic Drive element: Ball screw Drive motor: AC servo motor, variable speed Measuring system: Absolute, rotary encoder Resolution: 0.001 mm Distance table top to spindle center: min. 150 mm Distance table top to spindle center: max. 700 mm Feed rate: max. 1,600 mm/min Grinding column material: Micro granite Z-Axis Guide system: Linear guideways Lubrication: Grease, automatic Drive element: Ball screw Drive motor: AC servo motor, variable speed Measuring system: Absolute, rotary encoder Resolution: 0.001 mm Travel: 600 mm Feed rate: max. 2,000 mm/min Max. grinding wheel diameter: 400 mm Max. grinding wheel width: 100 mm MACHINE DETAILS Dimensions & weight Dimensions (D x W x H): 2,685 x 3,840 x 2,755 mm Machine weight: 8,000 kg Type of input current: Alternating current (AC) Input voltage: 400 V Operating voltage: 400 V AC Frequency: 50 Hz Total connected load: 50 A Max. feed current: 22 A

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm centre height 520 mm turning length 4810 mm workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Equipment/accessories: -2 x face plates -3 jaw chucks Csdpfx Asygxy Uea Nsgt -2 x steady rests -Multifix holder -Turning tools -Various tips -Technical documentation

Condition: used, Year of construction: 1991, Technical details: grinding length: 600 mm grinding width: 375 mm workpiece height: 375 mm max. table load: 300 kg grinding range: 350 - 600 mm Table dimensions: 900 - 350 mm magnetic plate size: 600 x 350 mm dimensions of grinding wheel: 300 x 50 x76,2 mm mm Csdpjxu D Huefx Aa Nogt total power requirement: 12 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,3 x 2,6 x 2,4 m dimension coolant device LxWxH: 0,8 x 0,8 x 0,8 m -Longitudinal table stroke = 700mm -transverse travel of table = 800mm Coolant pump *

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 4,800 kg, ELB Perfekt 8 SPS, year of manufacture 1998, grinding area 800 x 400 mm, grinding wheel 300 x 50 mm, 4.3 kW spindle power, SPS control for automatic grinding cycle (roughing, finishing, sparking out, lifting), dresser mounted on spindle head with compensation. The machine is currently being overhauled by us: the grinding spindle is being newly fitted with bearings, the guideways are being hand-scraped. After the overhaul, the machine will meet the geometry of a new machine and is thus immediately ready for operation. Accessories: electro-permanent magnetic chuck 800 x 400 mm, water tank with automatic paper filter, partial enclosure. All functions are tested, and the machine can be demonstrated under power at our facility. We are also happy to handle installation and on-site training. Financing/leasing is no problem; we’d be happy to provide an offer! Codpfxorpz Evs Aa Njgt

Condition: good (used), Year of construction: 2003, X 1740mm, Y 766mm, Z 660mm 10000 rpm Parts shown by hand not come. Cgodpfewyblzsx Aa Net

Condition: good (used), Year of construction: 2003, ELB Rotary 40 NC-K rotary table surface grinding machine, table diameter 400 mm, grinding height 300 mm, year of manufacture 2003, ELN NC-K control, spindle power 4 kW, grinding wheel 300 x 50 x 76.2 mm, rotary table with magnetic chuck diameter 400 mm, full enclosure, coolant system with paper band filter, can be inspected under power, we are happy to take care of installation / training and subsequent on-site service! Financing/leasing is no problem, we are happy to provide an offer! Cgsdpfx Aaouiafue Net

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Perfekt 6, year of manufacture 2002, grinding area 600 x 400 mm, grinding wheel 300 x 50 mm, 4 kW spindle power, automatic grinding cycle, roughing, finishing, spark-out, lifting, dresser mounted on spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry of a new machine. The grinding spindle has new bearings. Accessories: electro-permanent magnetic clamping plate 600 x 400 mm, water tank with paper filter unit. All functions have been tested and the machine can be demonstrated under power at our facility. We are also happy to handle on-site installation and training, as well as future servicing. Financing/leasing is available; we will be pleased to provide an offer! Cgedexdalfopfx Aa Net

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Cgsdeuyk N Iopfx Aa Njt

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, grinding length: 500 mm, grinding width: 400 mm, ELB Smart Line S 5 STC, year of manufacture 2008, grinding area X/Y/Z: 500mm/400mm/475mm, grinding wheel dimensions: 300mm/50mm/76.2mm, table speed up to: 30m/min, max. table load: 400kg, spindle taper: 36mm, control: Siemens STC, magnetic chuck 500 x 250 mm (can be enlarged), incl. coolant tank with paper filter system, grinding spindle with new bearings, all functions checked, in very good condition. The machine can be inspected under power at our facility; test grinding is also possible. We are happy to handle installation/training at your site as well as ongoing service in the future. Cedper D R I Sofx Aa Negt

Condition: good (used), Year of construction: 1990, functionality: fully functional, grinding length: 600 mm, grinding width: 375 mm, total height: 375 mm, Surface grinding machine (226600) ELB SWN 6 NC-K; SN: 196900887, Magnetic clamping table, 350 x 600 mm, travel X/Y/Z 600 x 375 x 375 mm, Maximum table load 300 kg, grinding wheel Ø 300/76.2 mm, recess on both sides, dressing device, Lach diamond, missing grain, dresser, type MK0, maximum speed range 3,000 rpm, power 3.7/4.5 kW, machine weight 3,500 kg, footprint L/W/H 2,750 x 2,250 x 2,400 mm, out of service Cgedpfxjy H Hhne Aa Njt

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates Cgsdpfx Aajylw Ste Nst • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 1986, grinding length 800 mm grinding width 375 mm workpiece height 375 mm magnetic clamping plate, electical 900 x 300 mm spindle turning speed range 1500 - 3000 U/min table surface area 1550 x 370 mm table longitudinal travel 100 - 1000 mm max. workpiece weight 350 kg Cgodpfxount Iue Aa Net dimensions of grinding wheel 300 x 50 mm total power requirement 9 kW weight of the machine ca. 4,6 t dimensions of the machine ca. 4,0 x 2,3 x 2,6 m

Condition: used, ELB SW4 surface grinder Grinding length 400 mm Grinding width 200 mm Workpiece height 300 mm Cgsdpfxeyzgdxs Aa Njt Dimensions of grinding wheel 275 - 315 mm Magnetic plate size 400 x 200 mm Max. table load 200 kg Weight of the machine ca. 1,6 t Dimension machine approx. 1,55 x 1,45 x 2,20 m Complete with the coolant tank and documentations.

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT50 - Spindle power : 45 [kW] - Spindle speeds : 12000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 1700/1400/1240 [mm] - Rapid traverses rates (X/Y/Z) : 48 [m/min] - Cutting feed rates (X/Y/Z) : 20 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 - Tool exchange time : 6 [sec] PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 1250/1250 [mm] - Pallets number : 2 - Maximum weight upon pallet : 3000 [kg] - Distance table center / spindle nose (min./max.) : 70-1470 [mm] Cgedsw D Hwwspfx Aa Not - Maximum workpiece diameter : 1970 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine weight : 32500 [kg] MACHINE HOURS - Number of hours under power : 34422 [h] EQUIPMENT - CNC : Fanuc 31i-model B5 Interface : Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 70 [bars] * Coolant through spindle * with paper filtering unit * with cooling unit for coolant * With cabin washing - Chips conveyor - Tool probe - Workpiece probe : Renishaw RMP60 - Electric transformer

Condition: used, Year of construction: 1996, grinding length 1.000 mm grinding width 550 mm workpiece height 400 mm table surface area 1.580 x 550 mm table load capacity 950 kg magnetic clamping plate 1.000 x 550 mm x-Travel 1.200 mm table feed 1 - 30 m/min vertical feeds: 1 - 300 mm/min z-axis 470 mm cross feed 1 - 2.000 mm/min dimensions of grinding wheel 400 x 100 x 127 mm grinding wheel speeds 1.500 - 3.500 U/min grinding spindle drive 11,00 kW total power requirement 23,00 kW weight of the machine ca. 7,50 t Cgsdpfoxx A Dmsx Aa Not dimensions of the machine ca. 4,50 x 3,20 x H2,90 m Coolant system with coolant pump integrated in the hydraulic tank, exhauster.