Elumatec 150 profile machining center

Elumatec SBZ 150

Year of construction: 1999, condition: used, 5-axis working center Usefull lenght 12 m (or 2x 6m) 20 pneumatic clamps automatic toolchange Credpfx Ajxhdnfsbcsh angular tool

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1500050285, travel distance X-axis: 7,800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, workpiece length (max.): 7,300 mm, rotational speed (min.): 24,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 14, tool diameter: 100 mm, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, SBZ 150 | 5-axis Profile Machining Centre 7.800 mm Crsdpexdnh Ujfx Abcoh 5-axis profile machining centre ● Designed for economical and efficient machining of aluminium and thin-walled steel profiles ● All operations, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the profile bar is stationary to protect the profile surfaces 6-sided machining ● Operator software with graphic display of workpieces ● The magazine can be equipped with nine standard tools, five special tools and one saw blade ● Ten clamps ● Two separate working zones enable machining in shuttle operation ● 5-axis controller for 3D machining ● 15" colour display, Diskette port ● DOS operating system

Condition: used, Year of construction: 2004, Technical details: travel -x axis: 9000 mm travel -y axis: 1000 mm travel -z axis: 630 mm Credpfxoxazt Nj Abcsh speeds of the milling spindle: 100-22.000 U/min diameter of hob: 100 mm tool taper: HSK-F 63 total power requirement: 15 kW weight: 9 t

Year of construction: 2001, condition: used, Pictures to follow - machine is being overhauled Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm Credpot Ea Tfefx Abcoh - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder - 2-layer machining

Condition: excellent (used), Year of construction: 2015, operating hours: 20,223 h, functionality: fully functional, machine/vehicle number: 1500050376, travel distance X-axis: 7,520 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 300 mm, controller model: eluCam, spindle speed (max.): 24,000 rpm, operating hours of spindle: 3,040 h, spindle motor power: 15,000 W, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, SBZ 150 Profile Machining Center 7.3 m 5-Axis CNC eluCam Year of manufacture: 2015 8 clamping devices Automatic length measurement on both sides Indexing unit with clamping carriage, software version Complete tool set (HSK-63F) including two saw blades D=400 mm + D=180 mm Machine is in excellent condition and immediately ready for operation Machine is ready for collection in a 40' HiCube sea container and can be inspected at any time by appointment Crjdpjw Rcdlsfx Abcoh

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Csdpfx Ajw A Rv Ijbcorh Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Year of construction: 2004, condition: ready for operation (used), Main Drive Spindle speed range 34000 Spindle motor power 15 kW Number of axis 5 Movement X-Axis Movement 9500 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 1000 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 40 m/min Tools Type of tool holder HSK-63F Media Chip conveyor Yes Additional Equipment 2-zone pendulum operation Angle milling head for bottom-side machining (optional) Automatic length measurement Barcode scanner Label printer Cycle time monitoring Tool holders, collets, saw blades, tools included eluCad (office software package for production optimization) This 5-axis Elumatec SBZ 150 was manufactured in 2004. It features a CNC profile machining center with a maximum machining length of 9,220 mm and a spindle speed of 34,000 rpm. The machine includes a tool magazine with standard and special tools, and supports 6-sided machining with optional angle head. It's dismantled and ready for delivery. If you are looking to get high-quality milling capabilities consider the Elumatec SBZ 150 machine we have for sale. Contact us for more information. Cedpfxewtiw Ee Abcorh Application Types Other Machine Tools