CNC turning and milling center

EMCO HyperTurn 45 SM2Y

Condition: ready for operation (used), Year of construction: 2015, A vertical high-performance milling and thread machining center DMG Mori is available. Travel X/Y/Z: 700mm/420mm/380mm, max. workpiece dimensions X/Y: 880mm/550mm, table dimensions X/Y: 840mm/420mm, max. table load: 400kg, spindle speed: 10000rpm, spindle power: 25kW, torque: 45Nm, tool positions: 15, tool holder: BT30, rapid traverse: 60m/min, feed force: 5kN. Machine dimensions X/Y/Z: approx. 1650mm/2350mm/2500mm, weight: approx. 4000kg, control: Siemens Sinumerik 840D Solutionline, machine hours: 28892h, spindle hours: 12674h. Documentation available. An on-site inspection is possible. Bdsdpfx Abjynlu Uoteg

Condition: used, Year of construction: 2007, 4-in-1 Combination Hammer C3-31 in good condition Year of manufacture: 2007 Bedpfezq Ddljx Abtedg 3 kW 3 blades approx. 500 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For a description, please refer to the attached data sheet. Bjdjzqcvyepfx Abtodg

Condition: new, Horizontal bending machine Fastech FP 40 Description • Pressing force: 40t • Stroke: 285mm • Max. tool height: 250mm • Flat bar over the top edge: 200 x 24mm • Working speed: 10.0mm/sec • Return speed: 10.0mm/sec • Working height: 930mm • Table: 660 x 1250mm • Total power consumption: 4.0kW • Motor: 400 Volt 50Hz • Weight: 1100kg • Dimensions L-W-H: 1250 x 650 x 1250mm • Oil capacity: 40.0l Features: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel • Machine made of hardened and ground forged steel • Digital display for stroke adjustment • 1 x tool set Bedpfx Abefg Eu Retodg • Double foot switch

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis Bodsyz Stlspfx Abtedg MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Control: Mazatrol Matrix Nexus Year: 2008 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information about this machine. • 2 x 16 fold Sauter star VID 30 • Siemens 840 D • Excentric turning and milling operation • TC alternating speed • Counter spindle • Glass scales Y1, Z1, Z2, Z3, X1, X2, X3 Additional equipment • 980 liter coolant with 8 bar/20 L and 20 bar/40 L programmed by M function • Pater band filter Bdsdox D Nd Depfx Abtjg • Chuck rinsing device for main outside • Chuck rinsing device for counter outside • Coolant spray gun • Hinge type conveyor • Bar machine package • Window cleaning with compressed air • SK package for alu machining • Tool breakage Artis CTM

Condition: used, Year of construction: 2016, x-travel 800 mm y-travel 1020 mm z-travel 1020 mm Control SIN840D sl B - axis 360 x 0,001 ° A - axis -185 / +45 x 0,001 ° feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206 / 159 Nm spindle diameter in front bearing 70 mm tool taper HSK-A63 tool magazin: 272 tool length - max. 400 / 465 mm tool diameter 68 mm tool diameter with 2 vacant positions 160 mm tool total weight 8,00 kg Chip to chip time 4,2 sec. size of pallet 630x630 mm workpiece weight 700 kg interference diameter 900 mm total power requirement 50,00 kW weight of the machine ca. 32,00 t dimensions of the machine ca. 10,00 x 6,00 x H3,50 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, integrated KNOLL coolant, coolant through the spindle, chip conveyor, RENISHAW measuring probe, BLUM-Laser, GROB Spindle-diagnosis (GSD) Bodozrpnfepfx Abtjdg Additional Tool-Magazine TM218, Pallett-Storage PSS630-R13-12

Condition: good (used), Year of construction: 2003, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 4,000 kg, number of slots in tool magazine: 120, controller manufacturer: Heidenhain, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, overall weight: 12,000 kg, table length: 630 mm, table width: 500 mm, controller model: iTNC530, nominal power (apparent): 61 kVA, rapid traverse Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, table load: 4,000 kg, operating hours of spindle: 19,500 h, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned operation, geometrically within new-machine tolerance. Bdsdpfx Absrxrkletog The machine can be inspected and measured on site by arrangement. Machine Data: Machine description: Machining centre with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: good Equipment: - Direct linear measurement in X/Y/Z (glass scales) - Chip conveyor - High-pressure coolant system 40 bar (IKZ) - Extraction unit - NC rotary table - Tool magazine, 120 positions - Heidenhain measuring probe - Rotating viewing window - High-pressure coolant 40 bar - Signal lamp - Chip flushing - Operating mode 4 Technical Data: Number of axes: 5-axis Control: Heidenhain iTNC 530 NC rotary table clamping surface: 500 mm x 630 mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travels and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Feed rates and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor spindle: Max. speed: 18,000 rpm Spindle taper: HSK A63 Tool changer: Automatic tool changer: Yes Number of magazine positions: 120 Pallet changer: 5 pallets

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling system and accessories. For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully functional workshop device and features state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. hose set • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 is carried out directly via the back of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for demanding applications in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ Bjdpfjyxvwiex Abtsdg The device is in a ready-to-use condition. Inspection and test run can be arranged.

Condition: like new (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT FB-450 MC with Sinumerik 828D Contouring control with “manual Machine” Universal Milling- and Drilling-Machine with Sinumerik 828D Contouring control and hydraulic tool clamping working area X450/Y350/Z400mm 7/10kW power Spindle speeds from 10-5000 U/min feeds from 10-5000 mm/min rapid traverse up to 5000 mm/min toolmaker accuracy DIN8615 tool clamping acc. DIN 69871 SK40 including:  linear guides  ball screws  vertical milling head +/-90° swivelling with 80mm sleeve stroke  swivel device for vertical milling head  hydraulic tool clamping  coolant equipment  LED-machine lamp  automatic central lubrication  rigid angle table 800x400mm  chip box  operating tools  dokumentation  executing with open work area protection (mode3)  controlled and manual version in one mashine  Sinumerik 828D Contouring control incl. Control unit in 3-Axis with ballsrews and servodrives, Bodpfx Aboxapdcjtodg Conversational cycles entry with grapfic support: Drilling cycles for drilling, pecking, reaming and tapping on linear and circular hole patterns, Milling of rectangular and circular pockets and studs, Slot milling cycle, Face milling cycle, ... USB Interface,