CNC machining center

Emmegi Phantomatic T3 A

Condition: used, Year of construction: 2009, 3-axis CNC machining centre - Emmegi Phantomatic T3, Year 2009 Working hours: only 15,681 hours and approximately 36 minutes (photo no. 8) for machining operations on bars or workpieces made of: Aluminium PVC Rsdpoy Ry Trjfx Aguocb Light alloys Steel up to 3 mm Equipped with a traversing work table that facilitates loading/unloading operations and considerably increases the machinable section. Main features: Electro-spindle: 5.5 kW (optional 7.5 kW) Maximum speed: 20,000 rpm Tool holder: HSK 63F Manual quick-change tool magazine Blade capacity: Ø 180 mm Standard number of vices: 4 Maximum number of vices: 6 Manual vice positioning Axis travels: X axis: 4300 mm Y axis: 270 mm Z axis: 300 mm Machining capacities: -Top face machining: 1 -Side and end machining with angle head: 2 + 2 -Tapping capacity on aluminium: --Standard: M8 --Optional: M10 Equipment: 15” touchscreen operator interface USB connections Barcode reader predisposition Automatic pneumatic stops Software-programmable lubrication system

Condition: excellent (used), functionality: limited functionality, Year of construction: 2000, For sale: High-quality Liebherr concrete mixing plant in excellent condition – including BIBKO wastewater treatment system A used, excellently maintained concrete mixing plant from the renowned manufacturer Liebherr is for sale. The plant impresses with its low operating hours, complete technical documentation, and original delivery condition – all components come from the manufacturer itself. Important addition Also included in the offer is a wastewater treatment system from BIBKO Umwelttechnik & Beratung GmbH. This allows for environmentally friendly and economical reuse of residual and wash water, which not only reduces operating costs but also meets the ecological requirements of modern production processes. Main technical data Type: Ringtellermischer R 1.0 Practical mixing capacity: 1.0 m³ solid concrete per batch Efficient filling: A 6m³ truck mixer is filled in only 6 batches Theoretical mixing capacity: 50 m³/h Practical mixing capacity: 40 m³/h Aggregate storage Star storage: 1,200 m³ total capacity Active storage: 65 m³ Number of aggregate components: 5 Rodpfjwlwruox Aguecb Cement silos 2× cement silo at 40 t each with overfill protection 1× two-piece cement silo at 80 t with overfill protection Condition of the plant Commissioning: 2000 Out of operation: since 2006 Operating hours: approx. 3,500 (estimated) Condition: Very good – minimal use, excellently maintained Previous owner: First owner Originality: All components original from Liebherr Documentation: Fully available (electrical diagrams, foundation plans, structural analysis, etc.) The solid and well-thought-out construction of the plant enables easy disassembly and reassembly thanks to the predominantly bolted design. The control cabinets are connected to each other via plug connections – for details, please refer to the attached PDF documents. Additional service upon request: We are happy to support you in realizing your project with experienced partner companies for: Dismantling and reassembly Electrical commissioning (industrial electronics technician) Organization of transport with reliable forwarding agents This way, your new plant can be quickly and professionally put into operation at a new location. Interested? We look forward to your inquiry and are always available to answer any questions you may have!

Condition: excellent (used), functionality: fully functional, X axis travel (longitudinal axis): 4300 mm Y axis travel (transversal axis): 270 mm Z axis travel (vertical axis): 300 mm Rcedpfxjy Drzho Agusb Electrospindle 1 HSD – max 18,000 rpm – power 5.5 kW Tool magazine capacity: 4 Angular head for lateral operations Number of clamps: 4 Automatic clamp positioning Weight: 1950 kg

Year of construction: 2008, condition: used, functionality: fully functional, Three-axis interpolated CNC machining center with angular head accessory (enabling 4-axis machining), model Phantomatic T3 A. Specifically designed for comprehensive processing of aluminum, PVC, and light alloy profiles. Renowned for its historical reliability, precision, and sturdiness, this machine is ideally suited for window and door fabrication workshops as well as light metal carpentry applications. Structure and Configuration • Monoblock, fully enclosed frame with extensive perimeter protections • Completely enclosed working area with safety panels • Extended worktable with multiple pneumatic clamps for secure profile holding • Heavy-duty linear guides and kinematics, engineered for continuous operation • Prepared for machining of longer profiles Machining Unit • High-performance vertical spindle suitable for: o Milling o Drilling o Tapping o Slotting and contoured machining • Tool holding stations in view, including: o Milling head attachments o Drilling tools o Saw blade group (as shown in photos) • Manual tool change with current tool set included Controls and Commands • Emmegi operator console featuring: o Integrated monitor o Physical control keypad o Safety selectors o Emergency stop button • Ergonomic operator station with work surface • User-friendly, proven control system—suitable even for less experienced operators Included Equipment (as pictured) • Tool and toolholder set • Accessory case with: o Service wrenches o Clamping devices o Support equipment • Full set of guards and safety covers • Integrated electrical system on board the machine Applications • Aluminum and PVC windows and doors • Lightweight façades • Industrial profiles • Light metal fabrication • Precision machining of extruded profiles Machine Condition • Used machine Rcsdoygumdepfx Aguob • Overall condition: good • Source: production workshop • Dismantled / ready for loading (see photos) • Normal wear consistent with age

Condition: used, Year of construction: 2006, Control system: Mazatrol 640 T Nexus Working area: - Max. swing diameter: 675 mm - Max. swing diameter over slide: 276 mm - Max. turning diameter: 380 mm - Max. turning length: 538 mm - Max. bar capacity: Ø 65 mm Main spindle: - Max. speed: 35–5,000 rpm - Main drive power, integrated spindle motor: 26 kW / 22 kW - Max. torque: 350 Nm - Spindle nose: A2-6" - Spindle bore: Ø 76 mm - Chuck diameter: Ø 210 mm - Indexing, C-axis: 0.001° Tool turret: - Number of tool stations: 12 Travel: - X-axis: 230 mm - Y-axis: 100 mm - Z-axis: 575 mm Rodjy Sxkljpfx Aguecb Coolant: - Tank capacity: 160 l Travel speeds: - Rapid traverse X-axis: 30 m/min - Rapid traverse Y-axis: 21 m/min - Rapid traverse Z-axis: 33 m/min Tailstock: - Mounting: MK 5 - Tailstock travel: 550 mm Scope of delivery: - Existing manuals as shown in the pictures - 8 driven tool holders - 13 static tool holders - LNS Quickload Servo III bar feeder - Coolant system - Chip conveyor Dimensions & Weight - Approx. footprint L x W x H: 6015 x 2000 x 1900 mm - Approx. weight: 5600 kg Control system: Mazatrol 640 T Nexus * Max. swing diameter: 675 mm * Max. turning diameter: 380 mm * Spindle nose: A2-6" * Max. turning length: 538 mm * Max. bar capacity: Ø 65 mm * Max. speed: 35–5,000 rpm * Max. torque: 350 Nm * Spindle bore: Ø 76 mm * Indexing, C-axis: 0.001° * X-axis: 230 mm * Y-axis: 100 mm * Z-axis: 575 mm * Tank capacity: 160 l * Rapid traverse X-axis: 30 m/min * Rapid traverse Y-axis: 21 m/min * Rapid traverse Z-axis: 33 m/min * Mounting: MK 5 * Tailstock travel: 550 mm * Approx. weight: 5600 kg

Year of construction: 2011, condition: reconditioned (used), functionality: fully functional, X-axis travel (longitudinal axis) 4300 mm Y-axis travel (transverse axis) 270 mm Z-axis travel (vertical axis) 300 mm Electrospindle 1 HSD - max 18000 rpm - power 5.5 kW Rcsdpfxevi N H To Agusb Tool magazine capacity 8 Bevel gearbox for lateral machining Number of vices 4 Vices positioning: automatic Weight 1950 kg

Condition: excellent (used), functionality: fully functional, Durkopp Adler 204-374 (heaviest in its class) Single-needle flatbed sewing machine - triple compound feed (walking foot) - large capacity hook ("duck" type) - pneumatic presser foot lift - needle positioner - 380V power supply + compressed air required The machine is in very good technical condition. Redpey Rraqefx Agujcb Delivery to the customer via Raben courier is possible. For more information: +48 662 448 730

Condition: used, Year of construction: 1995, machine/vehicle number: 2500, SECOND-HAND ROUND END TENONER BACCI MOD. TSG2T - CE RULES - Kw 3.75 Rodpfowrm N Njx Aguecb - Volt. 380/50 - Year 1995

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 05/2027, type of input current: AC, Apple Processing Machine Feuma ASETM Rsdpfxsy H Utrs Aguecb Peeling, Coring, Segmenting for fruit diameter approx. 30-85 mm Output approx. 70 - 100 kg/h Only with us DGUV V3 safety tested Connection: 230V, 580 Watt Dimensions approx.: 320 x 780 x 400 mm (W x D x H) Used machine Visit our large machinery warehouse!

Condition: used, functionality: fully functional, input voltage: 380 V, SECOND-HAND ORBITAL SANDER CAMAM MOD. LEC200/AV Rcodpfx Aox Rn Taoguob - With feeding units - Min/max diam. 10/100mm - Motor 5.5hp - Volt. 380v/50hz