Engel ES650H/200W-200HL-2F

Engel ES650H/200W-200HL-2F

Condition: ready for operation (used), Year of construction: 2000, operating hours: 63,929 h, clamping force: 2,000 kN, controller manufacturer: ENGEL, controller model: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information. • Condition: Well-maintained and serviced • Clamping unit: • Mold weight: 1500 kg • Total weight: 3000 kg • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Return force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • No. of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle orifice: 15 mm • Pump installed: 30 / 12.3 kW • Injection unit 2 (200W): Dsdpfxoyf Htyo Aa Necg • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump installed: ~6.8 kW • Controls and functions: • SPC (Statistical Process Control): Yes • Pressure interface: Yes • 2nd injection barrel: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Take-out device (robot): ERC 23/1-E • Travels: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • WZ sensor system: p–z–t–σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm Dcedpfxez N Ame Aa Nsg cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 96,194 h, clamping force: 2,000 kN, screw diameter: 40 mm, injection weight: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. • Configuration: 2K (two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Mold installation height (min): 500 mm • Opening stroke: 750 mm • Max. daylight (platen distance): 1150 mm • Max. mold weight: 3000 kg (1500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1946 bar • Shot volume (swept): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): Dcjdeyfrb Nopfx Aa Nsg • Screw diameter: 25 mm • Injection pressure: 2089 bar • Shot volume (swept): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1000 mm • Z-axis stroke: 1600 mm • Hot runner control: 16-zone

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: ES650H/200W-200HL-2F Baujahr: 2004 Schließkraft: 200 Tonnen Holmabstand Holmlos Einbauhöhe min.: 500 mm Öffnungsweg: 750 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Steuerung: CC100 Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E Dsdpfx Aajyak A Ij Nocg -4 Stück Kernzüge -Drehtischsteuerung

Condition: good (used), Injection molding machine Engel Victory 310-60 Electric CC200 Year of manufacture: 2006 Clamping unit type: Fully hydraulic Clamping type: Columnless Clamping force: 600 kN Plate dimensions (table dimensions): 720 mm Distance between columns: 450 mm Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Moving plate centering (D): 125 mm Fixed plate centering (D): 4,70 m Threaded holes on plates: 5700 kg Maximum mold weight: 1,40 m Dimensions (W x H): 2,70 m Machine weight: 5700 KG Heating channels: 9 Nozzle clamping force: 160 mm Nozzle stroke: 360 1/min Pump drive power: 13 kW Heating capacity: 9 kW Standard voltage: 400 V 50 Hz Oil capacity: 185 l Auger diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2400 bar Screw pitch: 24 mm Screw speed: 155 cm³/sec. Plasticization capacity: 40.6 Air injection speed: 290 Additional equipment: Monitor text in German CEE 16A plug socket Dcoderg Hh Nopfx Aa Neg CEE 16A plug socket Hydraulic core 2x Air fan 1x Water-cooled machine battery Machine without material tank Leveling elements Standard interface/Euromap 12 Schuko 10A plug socket Schuko 10A plug socket

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm Dcedpep Audqjfx Aa Njg MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: used, Year of construction: 2013, The original build year of this machine was 1999. It was overhauled at the end of 2013 by Walter and converted from HMC500 to Fanuc control. In 2014 it was returned to operation. Maintenance was carried out and the associated parts were replaced up until 2024. Protocols/logs are available. Suitable for regrinding and remanufacturing of wood and metal working tools of all kinds. Accessories: FANUC i15 Control Pallet loader cylindrical, Toolstudio Software Standard & Advanced Version 2.1 Toolstudio Software Drills Toolstudio Software Step Tools Toolstudio Software Boost Toolstudio Calibration Probe Software package 1 (cylindrical mills) Software package 2 (tapered-spiral end mills) Software package 3 (drill bit and step drill) Software package 4 (step tools) Software package 6 (woodworking tools) Software package 8 (taps) Software package 16 (warming-up program) Software package 32 (contours) Measuring probe Electrostatic mist extractor Oil collection tray Automatic fire extinguishing system Pneumatic workpiece clamping Machine light X – axis longitudinal movement: 350 mm Y-axis vertical movement: 200 mm X-axis cross movement: 470 mm C-axis rotary table swing range: + / - 200° Centre height (with / without over-table): 130 / 160 mm Workpiece holder: ISO 50 Max. Workpiece diameter: 100 mm Workpiece length: 270 mm Grinding spindle speed stepless variable: 0 – 9500 U / min Workpiece length face grinding: 150 mm Grinding wheel diameter: max. 150 mm Drive power grinding spindle: 9 kW Connected load: 400 V / 50 Hz / 25 kW Weight: approx. 3600 kg Dcsdpsyrra Ssfx Aa Nsg Dimensions W x D x H: 2869 x 2716 x 1933 mm colour: grey RAL 7035 / 7043.

Condition: new, Year of construction: 2021, functionality: fully functional, Edgebanding machine Hebrock K36 featuring PLC control, a maintenance-free and coated quick-heating glue pot, including pre-setup for rapid glue pot changeover. - 10" touchscreen interface - Maximum edge thickness: 3 mm - Minimum workpiece length: 200 mm - Minimum workpiece width: 80 mm - Feed speed: 10 m/min - Ready for operation in approx. 5 min - Maximum power consumption: 14 kW - Electrical requirements: 400V / 3-phase / 50 Hz - Machine dimensions (LxWxH): 5250 x 1230 x 1430 mm - Approximate weight: 1700 kg Additional Equipment/Options: • Whispercut pre-milling cutter, 60 mm workpiece height • Heatable infeed fence Djdpfx Aswyu E Usa Necg • Radius unit for corner rounding, R = 2 mm • Quick-change device for corner rounding motor • Multi-radius scraper (R2/R1) • Corner rounding for 60 mm workpiece height • Release agent spray unit • Cleaning agent spray unit • Edge protection spray system • Nesting package • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Interior LED lighting • Equipment for short parts processing • Preparation for return system (barbaric) • Axis package: motorized adjustment of height, edging, and pre-milling units • Additional workpiece infeed and outfeed supports (each 450 mm)

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Dcjdpjpdr Aisfx Aa Nsg Year 1998 Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate 660x560 Mould height min 200 mm

Condition: ready for operation (used), Year of construction: 1997, MODEL U.M. TG20/2500 CNC SIEMENS 840 C TURNING DIAMETER: 2500 mm TABLE DIAMETER: 2000 mm TURNING HEIGHT: 2000 mm MAX. WORKPIECE WEIGHT ON TABLE: 20000 kg MAX. TABLE SPEED: 2-250 rpm TOOL CHANGER: 10 pcs TABLE MOTOR: 60-100 kW C-AXIS RAM SECTION: 250x250 mm RAPID TRAVERSE: 10000 mm/min MILLING SPEED: 0-4000 rpm DRIVEN tools WEIGHT: 46000 Dsdpfexwp D Djx Aa Njcg