Engel ER-USP 5

ENGEL

Condition: good (used), Year of construction: 2015, clamping force: 2,200 kN, Equipment: documentation/manual, Controll : CC300 Clamping force: 220 t Injection unit Screw diameter: 45 mm (S8 Screw Geometrie G1, LD20) 30% GF Shot volume: 318 cm3 Type: Horizontal Drive: Hydraulic Clamping unit Min mould height: 300 mm max opening : 758 mm Equipment: Euromap 67 Mould heating controll 8 zones 2x Pneumatic valve 4x hydraulic valves Njdpox H Awlefx Adwecl 4x Core pullers Hours: ca 37000 Wittmann W818-4597 available Complete machine data on request.

Year of construction: 2022, condition: new, For sale is a NS 2 conveyor belt from Mass International. You can buy the belt both with and without separating roller. Separator roller costs an additional € 332 Feed : 600 mm ascending belt : 1300 mm Nsdpfx Asf E E Iqsdwscl GB: 405 mm NB: 350 mm Belt speed constant: 3m /min

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Screw diameter: 30 mm Weight: 3,200 kg Available immediately from stock Njdpsvygh Nefx Adwscl

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Clamping force: 25 tons Opening stroke: 350 mm Weight: 2,900 kg Immediately available from stock Ncedpfx Ajvxh Iuedwjl

Year of construction: 2022, condition: new, Additional cost with corrugated edge : 374 € *Wavy edge is considered as optional equipment!* - mobile on steerable stop rollers - angle adjustable - incl. 3 collecting trays Njdpfxsf U Evgj Adwocl - task length : 600mm - ascending belt length : 1800 mm - belt speed : 3m/min - cleat height : 30 mm - spring assisted height adjustment

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Ncedpfxoyc Ewxe Adwjl Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: excellent (used), Year of construction: 2013, clamping force: 4,000 kN, Equipment: documentation/manual, Control: CC200 Year: 2013 Clamping force: 400 t Max daylight: 1450 mm Mould height min max: 450-1000mm Ejector stroke: 250 mm Screw diameter: 70 mm (S8 screw G1) Nsdpfx Adoyctyzowscl Shot volume: 1501 cm3 Injection rate: 319cm3/sec Specific injection pressure: 2252 bar Max screw speed: 160 rpm Type: Horizontal Drive: Hydraulic 2 core pullers 16 mould heating zones 12 waterflow Euromap 67 ECODRIVE AIR VALVES

Condition: like new (used), Year of construction: 2023, operating hours: 40 h, functionality: fully functional, machine/vehicle number: S/N:01130421-2.24, type of input current: three-phase, total height: 1,150 mm, total width: 1,200 mm, total length: 1,030 mm, input voltage: 400 V, overall weight: 610 kg, feed length X-axis: 340 mm, feed length Y-axis: 320 mm, feed length Z-axis: 420 mm, type of cooling: water, input current: 16 A, protection type (IP code): IP20, laser power: 600 W, input frequency: 100 Hz, laser wavelength: 1,070 nm, Equipment: documentation/manual, type plate available, Offered is a virtually new laser welding machine from Alpha Laser including accessories (water cooler, welding fume extraction, lifting table, and much more). Average. Power 600 W - peak pulse power CW: 9kW The ALFlak systems consist of (basic equipment): - Laser with processing head and Leica observation optics - UV glare protection - Multifunctional foot switch - Lighting - WIN Laser software "BKS" - Joystick Laser: pulse and CW mode, pilot laser Motorized movement system Machine axes: 3 or 4 Travel range (X, Y, Z) approx. 320 x 330 x 370 mm Arm deflection/working distance: approx. 1400 mm Incl. standard beam deflection unit (600-0365A) Incl. 12.1" touchscreen new version (300-1171C) Ncjdevu Tdgopfx Adwjl With door acknowledgement on the display holder Incl. magnetic beam protection plate (701-0687A) If you are interested, I will be happy to provide you with a detailed offer.

Condition: ready for operation (used), Year of construction: 2004, clamping force: 1,100 kN, screw diameter: 135 mm, This Engel Duo 11050/1100 WP was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of 1100 Kn. Consider the opportunity to buy this Engel Duo 11050/1100 WP hydraulic injection moulding machine. Contact us for more information. Nodpfx Adsx D Hd Iowscl Clamping Unit • Clamping force: 11,000 kN • Opening force (with pressure pads): 760 kN • Opening force: 615 kN • Opening stroke: 2,350 mm • Mold installation height, min.: 700 mm • Mold installation height, max.: 1,280 mm • Maximum platen distance: 3,050 mm • Mounting platen size (horizontal × vertical): 2,340 × 2,040 mm • Tie-bar spacing (horizontal × vertical): 1,575 × 1,320 mm • Tie-bar diameter: 230 mm • Maximum mold weight: 30,000 kg • Ejector stroke: 300 mm • Ejector force: 230 kN • Dry cycle (Euromap 6) – time: 5.2 s • Dry cycle (Euromap 6) – stroke: 1,100 mmInjection Unit 1 • Screw diameter: 135 mm • Metering stroke: 570 mm • Maximum shot volume: 8,159 cm³ • Maximum screw speed: 120 rpm • Screw L/D ratio (3-zone): 20 • Plasticizing rate (3-zone): 166 g/s • Screw L/D ratio (barrier): 22 • Plasticizing rate (barrier): 256 g/s • Injection rate: 1,255 cm³/s • Injection rate at increased injection pressure: 915 cm³/s • Specific injection pressure: 1,170 bar • Specific injection pressure (increased): 1,600 bar • Nozzle stroke: 950 mm • Nozzle contact force: 150 kN • Heating capacity (standard): 93 kW • Number of heating zones incl. nozzle: 6 • Pump drive power: 130 kW • Oil filling volume: 1,600 lWeight • Net weight (clamping unit / injection unit): 62 t / 18 t

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of construction: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable Air valve x 6 Hydraulic core puller x 2 Control unit with hot runners x 12 Infrared safety curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized Engel service in Germany Dimensions Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW Price: On request Ncsdpfx Adjyctm Ujwol

Year of construction: 2022, condition: new, - Task length : 600mm - Climbing belt length : 1800 mm - working width 450 mm / total width 505 mm - mobile on steerable stop rollers - angle adjustable Nsdpfxelkdbys Adwjcl - incl. 3 collecting plates - belt speed : 3m/min - cleat height : 30 mm - spring assisted height adjustment

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/110 Tech / production line with robot Engel ER-HLI 41 and conveyor belt / machine in very good technical condition Year of manufacture: 2004 Injection unit: Screw diameter: 40 mm injection weight: 190 g Njdpfoyctmzex Adwjcl Injection pressure: 1670 bar Metering volume: 201 ccm Clamping unit: clamping force: 110 t tie bar distance: 0x0 mm size of clamping platens: 790x680 mm ejector: hydraulic clamping unit: hydraulic Control system: CC 100 Additional equipment: Production line with integrated robot Engel ER-HLI 41 and conveyor belt. Tie-bar-less machine Hydraulic core puller x 1 Injection unit hardened - bimetal Machine serviced by authorized service Engel Machine with original protective housing to the robot and conveyor belt Dimensions: Weight: 7400 kg Length/width/height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating power: 9,2 kW Total power: 27,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2017, Engel Victory 500/110 Tech Ecodrive with the Sepro S5.15 robot / Hybrid machine / Operating hours: approx. in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 40 mm Shot weight: approx. 225 g Injection pressure: 2029 bar Metering volume: 251 cm³ Clamping unit: Clamping force: 110 t Tie bar distance: 0x0 mm Size of the platen: 740x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in very good technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 6 Control with hot runners x 8 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - Energy saving Robot Sepro S5.15 Year of manufacture: 2016 5-axis robot: 3 axes driven by servo motors (electric); Axes A and C - pneumatic Touch control panel Robot with adapter and protective housing Purchase of the robot at extra cost Dimensions: Weight: 6800 kg Length/Width/Height: 4.90x1.50x2.00 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Ncedpfx Aeyctmuedwsl Price: On request

Condition: excellent (used), Year of construction: 2010, Weight 52 kg Nedpfx Adsu A Ticjwjcl Picker from IMM Engel Victory 80/50 Spex

Condition: excellent (used), Year of construction: 2018, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 8,000 h in automatic mode Year of construction: 2018 Ncjdpfx Adsyctmbjwsl Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition, the machine worked in a so-called clean room Operating hours: approx. 8,000 in automatic mode Total number of operating hours: 12,005 h Euromap 67 Robot interface Air valve x 6 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm In both injection units there is an option to replace the screw diameter with a smaller or larger one Robot Sepro Multi Inject 20 Year of construction: 2018 4-axis robot: 4 axes are driven by servomotors (electric): X, Y, Z, B (rotation) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request