Victory 1350/220 Tech

ENGEL

Condition: excellent (used), Year of construction: 2016, Engel duo 1800/500 eco drive Clamping force: 500 t Screw diameter: 70 mm Injection volume: 1139 cm3 Pjdpfxow Hbyle Afhopl Injection pressure: 1735 bar Distance between tie bars V: 830 mm Distance between tie bars H: 910 mm Type: Horizontal Drive: Hydraulic CC300 controll Hours: 38.000 Euromap 67 2 core pullers Ecodrive 2 pumps Quick clamp system

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Podewc U Izspfx Afhspl Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: ready for operation (used), Year of construction: 2004, operating hours: 96,194 h, clamping force: 2,000 kN, screw diameter: 40 mm, injection weight: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. Ppsdpfxeyfrb No Afhel • Configuration: 2K (two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Mold installation height (min): 500 mm • Opening stroke: 750 mm • Max. daylight (platen distance): 1150 mm • Max. mold weight: 3000 kg (1500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1946 bar • Shot volume (swept): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2089 bar • Shot volume (swept): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1000 mm • Z-axis stroke: 1600 mm • Hot runner control: 16-zone

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Screw diameter: 90 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Pedpfx Afsyfh I Ejhjpl Shot volume: 2740 cm3 Type: Horizontal Drive: Hydraulic VIPER 40 Linear robot available The machine has approximately 61,600 operating hours. 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Condition: used, Year of construction: 1999, material width 360 mm coil weight 3,0 t Ppedevut R Hopfx Afhel coil internal diameter 380 - 520 mm coil external diameter 1500 mm weight 1,4 t dimensions (WxDxH) 1,8 x 1,8 x 1,7 m with infinitely variable drive, hydraulic centralized expansion, coil loop control via contact plate can be inspected in running condition in our warehouse

Condition: like new (used), Year of construction: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year 2017) Year of manufacture: 2017 Control unit: CC300 Operating hours: 565 h Availability: Immediate Podpexvingjfx Afhjpl Clamping Unit: Clamping force: 500 tons Opening stroke: 1100 mm Distance between tie bars: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Maximum daylight (open distance): 1600 mm Injection Unit: Screw diameter: 120 mm Screw length (L/D): 22 D Injection volume: 5430 cm³ Maximum injection pressure: 1600 bar General Data: Motor power: 98 kW Heating power: 30 kW Clamping unit weight: 31 tons Injection unit weight: 15 tons Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core pullers: 3 Robot interface: No Bi-metallic screw/barrel: Yes Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and belongs to the modern ENGEL Victory tie-bar-less series, ideal for large moulds and high-precision production.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,437 h, clamping force: 1,600 kN, screw diameter: 45 mm, total height: 2,095 mm, overall weight: 8,700 kg, product length (max.): 5,155 mm, This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. It's equipped with a robot, ensuring efficient automation. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 650/160 tech machine we have for sale. Contact us for more information about this machine. • Operating hours: 73,437 h • Condition: Excellent • Status: In production • Maximum injection volume: 318 cm³ • Minimum mould height: 292 mm • Maximum mould height: 900 mm • Platen opening stroke: 609 mm • Platen dimensions: 750 × 750 mm • Tie-bar distance: Tie-bar-less design • Motor power: 22 kW • Heater power: 13.35 kW • Number of electrical connection pins: 16 • Injection nozzle radius (tip): R35 • Centering ring diameter: 125 mm • Number of cores: 0 • Number of heating zones: 0 Ppsdpfox Nr Huex Afhol Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 21953, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 405 mm, injection pressure: 1,300 bar, injection weight: 239 g, ejector stroke: 100 mm, installation height: 430 mm, total length: 3,910 mm, total width: 1,380 mm, total height: 2,050 mm, overall weight: 4,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, The machine is in good condition and has been maintained during operation with short maintenance intervals. The machine is connected and fully functional. An inspection with test run is possible. All machine documentation is available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Ppjdpfx Afexcw T Rehol Basic data: - No: 21953 - Year of manufacture: 1991 - Weight: 4000 kg - Clamping force: 800 kN - Dimensions: 3910 mm x 1380 mm x 2050 mm (LxWxH) - Control system: CC100 Technical details: - Operating voltage: 400V 3~ 50Hz - Screw diameter: 45 mm - Screw geometry: 3-zone - Max. dosing stroke: 160 mm - Nozzle thread: M28x1.5 - Max. injection pressure: 1300 bar - Shot weight PS: 239 g - Tie bar spacing, horizontal: 405 mm - Tie bar spacing, vertical: 345 mm - Max. opening stroke: 430 mm - Min. installation height: 150 mm - Max. installation height: 430 mm - Centering diameter: 125 mm - Cooling circuits: 6 - Core pulls: 1 - Max. ejector stroke: 100 mm - Excl.: Piovan dosing unit, conveyor belt

Year of construction: 2012, condition: ready for operation (used), screw diameter: 55 mm, This Engel victory 750/160 Spex was manufactured in 2012. It is a hydraulic injection moulding machine featuring core pull, an ejector plate safety device, a 1/2" air valve, and a 10-way water distributor. Consider the opportunity to buy this Engel victory 750/160 Spex hydraulic injection moulding machine. Contact us for more information. • 2 units available • Machine 1: 29,462 hours • Machine 2: 28,713 hours • Core pull • Ejector plate safety device • Air valve 1/2" Additional equipment Pjdpfx Asx D I Egjfhjpl • 10-way water distributor

Year of construction: 2010, condition: ready for operation (used), screw diameter: 55 mm, This Engel 750/160 Spex was manufactured in 2010. It is a hydraulic injection moulding machine featuring a 55mm screw diameter, core pull, ejector plate safety device, and a 6-way water distributor. If you are looking to get high-quality moulding capabilities, consider the Engel 750/160 Spex machine we have for sale. Contact us for more information. • Units available: 2 • Machine 1 hours: 35,066 h • Machine 2 hours: 38,769 h • Core pull • Ejector plate safety device Psdpjx D I Eaefx Afhopl • Air valve 1/2" • Water distributor: 6-way

Year of construction: 2023, condition: used, sheet width 300 mm coil weight 1 t Pedpslp U Tbsfx Afhspl coil internal dia. 375-550 mm coil outside dia. 1600 mm weight of the machine ca. 0,5 t dimensions of the machine ca. 1500x1500x1900 m

Condition: ready for operation (used), Year of construction: 2013, clamping force: 800 kN, screw diameter: 25 mm, This Engel Insert 200V/60 rotary was manufactured in 2013. A vertical injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Engel Insert 200V/60 rotary vertical injection moulding machine. Contact us for more information. Pedpfx Aox D H Awsfhjpl Screw diameter 25 mm.1.) Clamping forceClamping force: 600 kNOpening stroke: 338 mmEjector stroke: 105 mmEjector force: 20.1 kN2.) DrivePump drive power: 15 kW3.) Injection unit 1Screw diameter22 mm25 mm30 mm35 mmMax. swept volume53 cm³69 cm³99 cm³135 cm³Max. screw speed480 rpm (for all diameters)Current screw speed480 rpm (for all diameters)Injection rate80 cm³/s (22 mm)104 cm³/s (25 mm)149 cm³/s (30 mm)203 cm³/s (35 mm)Injection rate increased53 cm³/s (22 mm)68 cm³/s (25 mm)98 cm³/s (30 mm)134 cm³/s (35 mm)Specific injection pressure2221 bar (22 mm)2090 bar (25 mm)1451 bar (30 mm)1066 bar (35 mm)Specific injection pressure increased2402 bar (22 mm)2404 bar (25 mm)2205 bar (30 mm)1620 bar (35 mm)Nozzle stroke530 mmNozzle contact pressure28.3 kN

Condition: good (used), Year of construction: 2015, clamping force: 2,200 kN, Equipment: documentation/manual, Controll : CC300 Clamping force: 220 t Injection unit Screw diameter: 45 mm (S8 Screw Geometrie G1, LD20) 30% GF Shot volume: 318 cm3 Psdpfxex H Awls Afhspl Type: Horizontal Drive: Hydraulic Clamping unit Min mould height: 300 mm max opening : 758 mm Equipment: Euromap 67 Mould heating controll 8 zones 2x Pneumatic valve 4x hydraulic valves 4x Core pullers Hours: ca 37000 Wittmann W818-4597 available Complete machine data on request.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, TECHNICAL CHARACTERISTICS: Press Model: T130R CE Serial number: 11911 Year of construction: 2004 Nominal force: 1300 kN Nominal stroke: 7.5 mm Adjustable stroke: 16÷200 mm Stop position: TDC Ram adjustment: 100 mm Stop time: 190 ms Strokes per minute min./max.: 10/55 Maximum mould surface: 600 x 1100 mm Maximum closed mould height: 452 mm Min. closed mould height: 260 mm Upper mould mass: 140 kg Flywheel revolutions per 1°: 411 Max. insertions at 1°: 28 Installed power: KW 11 Voltage: V400 Auxiliary voltage: V24 Operating air pressure: BAR 5.5÷6 Mass: Kg. 10,000 Motorized hammer adjustment Hydraulic overload safety Pedpfx Asv Iktlefhepl Inverter Complete with user manual and CE conformity and 6 months warranty. • Work surface revived on CNC machine; NEW COMPONENTS INSTALLED: • Safety guards complete with safety keys; • Clutch plates; • Motor; • Motor pulley; • Motor belts; • Clutch pins and brite; • Swivel joint bearings; • Motorized hammer adjustment worm screw bearings; • Flywheel bearings; • Electric panel with touch screen; • Pedal board; • Air pressure gauges; • Hammer overtravel sensor; • Balancer cylinder gaskets.

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Screw diameter: 30 mm Weight: 3,200 kg Available immediately from stock Pjdpfxovygh Ne Afhopl