Injection molding machine

ENGEL Schneckenzylinder 4550/5550

Condition: excellent (used), Year of construction: 2016, WEISHAUPT WM-G30 gas burner - 3800 kW, with gas train Power: 400-3800 kW Model: ZM-LN Dlsdpfswg Hdijx Addea Year of manufacture: 2016

Condition: good (used), Year of construction: 2003, Manufacturer: KUKA Type: KR 210 L 180 Year of manufacture: 2003 Maximum load capacity: 150 kg Dlsdpfx Aoh Dw Dqjddsa

Year of construction: 1978, condition: used, pressure 100 t throat 380 mm stroke 400 mm power capacity 22 kW dayligth 600 mm ram surface 600x500 mm table surface area 720x600 mm Dljdpfx Aslp U Dpeddja weight of the machine ca. 9 t

Condition: excellent (used), Year of construction: 2000, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, column diameter: 180 mm, displacement volume: 5,430 cm³, Equipment: documentation/manual, The machine is ready to load. 900 ton clamping force, equipped with take out robot, hopper dryer, hopper loader. Dodpfx Asickd Hoddsla First and only owner since produced. The price is loaded on truck.

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm throat 380 mm dayligth 950 mm table surface area 800 x 700 mm table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s Dledpfx Ajvuk Ezjddsa feed up 375 mm/s working feed 0 - 16 mm/s oil volume 350 l power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1993, pressure 100 t distance between columns 1900 mm stroke 500 mm Distance table/ram, stroke up 800 mm table surface area 1850 x 1000 mm Hole in the table 160 mm table height over floor 850 mm ram surface 1850 x 800 mm Side window 540 mm speed down 400 mm/s speed up 400 mm/s working speed 20 - 70 m/min oil volume 900 l Power capacity 34,0 kW Weight 13,0 t Dimensions (WxDxH) 2,7 x 2,2 x 4,0 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary Dsdpfx Aovuui Doddjla can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2350 mm distance table/ram, max. stroke up, adjustment up 1200 mm distance between cutting impact cushioning 1600 mm Distance table/ram, stroke up 1200 mm stroke 800 mm table surface area 2060 x 1260 mm table height over floor 750 mm Die cushion pressure in table 100 t Die cushion stroke in table 400 mm die cushion area 1250 x 1000 mm side window 780 mm ram surface 2200 x 1500 mm Capacity of ejector in ram 63 t speed down 500 mm/s speed up 310 / 410 mm/s working speed 20 - 73 mm/s Dlsdpevuugvjfx Addsa quantity of oil 3900 l power requirement 80,0 + 45,0 kW weight 55,0 t Dimensions (WxDxH) 4,6 x 2,7 x 7,2 m Height above floor 6,0 m Height below floor 1,2 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, hydraulic ram interlocking can be offered without putting into operation (partly dismantled, in need of overhaul) or alternatively with overhaul and new control Siemens S 7-1500 F

Condition: like new (used), functionality: fully functional, machine/vehicle number: MV-300E/NC, total height: 3,500 mm, total width: 1,800 mm, total length: 2,300 mm, pressing force: 300 t, table width: 1,250 mm, table length: 1,250 mm, overall weight: 18,000 kg, pressure: 320 bar, Equipment: documentation/manual, safety light barrier, The MV-300E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for deep drawing, punching, and deburring tasks. Power tn 300 Motor Power kW 18 Piston Stroke mm 750 Approach Speed mm/s 110 Variable Working Speed mm/s 5-15 Return Speed mm/s 130 Guide Diameter mm 150 Maximum Pressure Bar 320 Table Usable Area mm 1.250 x 1.250 Between Columns mm 1.250 x 940 Vertical Clearance mm 1.000 Total Frontal mm 2.300 Total Lateral mm 1.800 Total Height mm 3.500 Weight kg 18.000 STRUCTURE AND TABLES Consists of three electrowelded blocks made exclusively of S355JR steel. Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed using finite element software. The bottom table has a 50 Tn hydraulic cushion with a useful surface of 950 x 750 mm and three front consoles to support the die outside the press.Incorporates a SIEMENS KP-700 COMFORT NC for the regulation of the top table stroke, speed changes, and cushion regulation. CYLINDER AND HYDRAULIC GROUP 2 single-acting cylinders with lapped sleeves, chromed pistons, and maintenance-free anti-wear guides. 2 auxiliary double-acting cylinders for fast approach and return speeds. Variable speed motorized hydraulic group. Includes cylinder decompression valve. Silent hydraulic pump. All hydraulic presses of the M series include a pressure switch located on the side, allowing the most suitable pressure setting for each type of work to be regulated. Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY Incorporates a Siemens SIMATIC S7 1200 safety PLC and a 7” KTP-700 COMFORT touch screen located on the electrical panel. Allows programming of semi-automatic and automatic modes, power, stroke, and dwell time of the top cylinder and cushion. It has a storage capacity of 300 recipes, each recipe can program all the above values. Prepared for Industry 4.0. The electrical panel includes a selector that allows choosing the type of work to be performed in manual, semi-automatic, or automatic mode and a selector to choose operation in fast or slow speed. Electrical and hydraulic maneuvers are redundant and self-controlled. They incorporate an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of correct operation and safety distance for photocells. Operation is carried out by low voltage electric pedal. For safety, they incorporate category IV photoelectric barriers located in the front working area, two fixed side guards, and a practicable guard with a magnetic disconnection detector located at the rear. Dlodjwphhnspfx Addea

Condition: used, Year of construction: 1991, pressure 125 t distance between columns 2100 mm stroke 1000 mm dayligth 1300 mm table surface area 2230 x 1300 mm Dodpsvut D Tefx Addsla die cushion capacity 63 t die cushion stroke 60 mm die cushion area 1000 x 900 mm table height over floor 1050 mm ram surface 2100 x 1000 mm feed down 50 mm/sec feed up 50 mm/sec working feed 10 mm/sec oil volume 410 l power requirement 22,0 kW weight 31,0 t required space 3,1 x 1,7 x 5,95 m hydraulic try-out press permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table and ram, hydraulic ejector in table, ram interlocking, two-hand operation No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: new, Year of construction: 2025, This is a state-of-the-art CNC machine dedicated to the industrial sector, used for cutting sheets and profiles, using a plasma torch. The machine is characterised, among other things, by a robust structure made of the highest quality steel and aluminium, a large cutting range, the possibility of cutting workpieces of any shape and low process costs. The high-end solutions used in production ensure reliable and safe operation. The cutting of the material is carried out in a short time, while maintaining the precision of the workpiece. In order to obtain the desired shape, it is only necessary to import the file into the software, so operation of this cutting machine is easy and intuitive. Our plasma cutting machines are primarily designed to process materials such as: Dodpfx Adeur R Ersdjla - Black steel, - Stainless steel, CONSTRUCTION The frame of the plasma cutting machine is designed and manufactured from scratch in our factory. The high quality steel used for the machines is cut, then welded and machined. The entire frame, gantry and gantry arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES Servo AC motors with high resolution and power have been used to drive our cutters, ensuring adequate acceleration and speed in each direction. These are highly dynamic and precise motors with feedback, guaranteeing zero defect by continuously controlling the operating parameters. The X and Y axes use classic and well-proven helical bars, which ensure long life and precision. FUEL Our plasma machines use components from the leading manufacturer PGCNC. The technologies used in the torch significantly increase productivity and cutting speed. HD technology provides better hole quality, increased piercing capacity and bevelling capabilities. This ensures high quality, repeatable cuts and maximises productivity with minimal running costs and reliability. KNIFE TABLE The knife table is made with technology that is resistant to working at elevated temperatures. This allows us to work continuously without worrying about the occurrence of burn-outs that prevent the material from being evenly positioned on the work table. The positioning of the scissors can be easily changed according to the size of the workpieces to be burnt. The knife table is an excellent solution for cutting thicker materials. SOFTWARE The machine is equipped with Starfire 2D CAD/CAM software. Various functions are available to the user, including the ability to import finished designs in vector formats: .dxf, .plt, .ai, .eps. The programme ensures fast and precise development of cutting paths. PLASMA SOURCE The basic plasma equipment includes the 120A cutting system, which is characterized by high productivity and cutting quality and speed. AUTOMATIC LUBRICATION SYSTEM Plasma cutting machine equipment also includes an automatic lubrication system that minimizes machine maintenance. The central lubrication system is a simple and functional device used to supply grease to the places where machine and equipment components come into contact. - POWER 400V 50Hz - MAX SPEED 45 m/min - DOOR SHAPE 200-600 mm - TYPE OF WORKING TABLE Knife table - WORKING TABLE WEIGHT 500 kg/m2