Engel VC320/80 fast track (2021)

Engel VC320/80 fast track

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW medium: oil up to 350°C Maximum external volume: 66 ltr at 350°C max. flow rate: up to 150 l/min  max. delivery pressure: up to 8,0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Regulation and control unit Smart Controller (7" Touch-Displ) -Heating control via solid-state relay -Control box IP54 -Cooling controlled via solenoid valve -Flow measurement using the differential pressure principle -Bypass between flow and return with reduced cross-section -Level monitoring by means of magnetic float switch -flow monitoring by recording the heating rod surface temperature and the flow rate -dirt filter in the cooling water supply and in the return of the circulation system -monitoring of the flow temperature by electronic safety temperature limiter -external oil filler neck -Dilo fittings on internal piping connections (except pump connections) -at 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanketing with pressure gauge and safety valve 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. *Unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be stated in quotations or order confirmations. Caedpog Ey Rfefx Addoa

Condition: ready for operation (used), Year of construction: 2021, Travel X/Y/Z: 630mm/530mm/465mm, tool holder: SK40, speed: 12000rpm, tool positions: 32, table dimensions X/Y/Z: 920mm/540mm, machine dimensions X/Y/Z: 2600mm/2350mm/2750mm, weight: approx. 6500kg. Documentation available. On-site inspection is possible. Cjdpfxowm Nphe Addsaa

Condition: ready for operation (used), Year of construction: 2019, Travel X/Y/Z: 1530mm/530mm/465mm, spindle speed: 12000rpm, spindle power: 22kW, spindle torque: 120Nm, tool holder: SK40, tool positions: 54, rotary table diameter: 630mm, max. table load: 500kg, rapid traverse: 30m/min. Documentation available. On-site inspection is possible. Caedpowm Npnsfx Addja

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Clamping force: 100 tons Caedorthkuspfx Addsa Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm3 Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€)

Condition: excellent (used), Year of construction: 2019, ENGEL Victory 120 Injection Moulding Machine – Tie-Bar Less Machine parameters Model: ENGEL VC 500/120 Clamping Force: 120 tons Control System: ENGEL CC300 Technology: Tie-bar-less design (VC – Victory series) Screw Type: S8 Screw Diameter: 40 mm L/D Ratio: 20 Drive System: Hydraulic with ECODRIVE SHV1 Additional Equipment: Plate Platen size HxV: 740x680mm Min Mould height: 300 mm Maximum distance between platens: 800mm Working hour: 12187 Key Features: Cedpfxswq Sple Addeaa 1. Modern tie-bar-less concept for flexible mould area access 2. High energy efficiency due to ECODRIVE technology 3. Precise control with ENGEL CC300 system 4. Robust hydraulic unit designed for demanding cycles Applications: 1. Plastic injection moulding for small to medium-size parts 2. Suitable for various materials depending on configuration

Condition: like new (used), Year of construction: 2021, Fabric cutting machine Lectra VIRGA.FA.CUT.MOTIF-E, year 11/2021, useful width 1.70 cm. Single cut, specific machine for cutting lines, squares and panels. Hours worked 86. Connected machine available for any tests. Cedpfevva Uuex Addeaa

Condition: ready for operation (used), Travel X/Y/Z: 1000mm/800mm/500mm, speed: 15000rpm, tool holder: SK40, tool positions: 30, spindle power: 15kW, table dimensions X/Y: 1250mm/800mm, max. table load: 1200kg. Machine dimensions X/Y: approx. 5000mm/3000mm, weight: approx. 12000kg. The machine has a damaged spindle. Documentation available. On-site inspection is possible. Csdeup Egxopfx Addeaa

Condition: like new (used), Year of construction: 2008, operating hours: 56,000 h, functionality: fully functional, machine/vehicle number: 170722, screw diameter: 25 mm, Technical data Manufacturer Engel Type e-max 310/100 Serial number 170722 Year of construction 2008 Operating hours approx. 56034 and approx. 58,000 Dimensions L/W/H 4.7 x 1.2 x 1.9 mtr. Weight 4400 kg Fully functional Condition very well maintained Special Control unit cc 200 Auger ⌀ 25 mm Injection weight 55 gr. Injection pressure 2400 Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm Mold mounting height 150 - 450 mm Opening stroke 350 mm Ejector stroke/force 100 mm /24 kN Hydraulic clamping unit Motor power 16 kW Heating capacity 9.2 KW /4 zones Total output 25.2 KW The machine is available from September in our warehouse in Hanover/Germany and has been tested. Extras core pull full-electric drive Tool heating 12 ejector plate safety device German and English screen language Caodpfx Adst U Agmjdoa incl. complete documentation guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover/Germany

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 191523, clamping force: 490 kN, screw diameter: 30 mm, -KOM 3086- Offered here is a used injection molding machine. Technical specifications: Casdpfx Adev Tb U Dedea Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2013 Machine number: 191523 Screw diameter: 30 mm Tiebar spacing: Tiebarless Centering diameter: 125 mm

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1240 mm Measurements depth 4530 mm Measurements height 1910 mm Machine weight 3500 kg Injection Unit Screw diameter 36 mm Stroke volume 153 cm³ Injection pressure 173 MPa Screw speed 98 g/s Clamping Unit Clamping force 900 kN Opening stroke 320 mm Max open daylight 700 mm Ejector stroke 100 mm Ejector force for / back 33 kN Media Oil tank 190 L General Data Measurements width 1240 mm Measurements depth 4530 mm Measurements height 1910 mm Machine weight 3500 kg Injection Unit Screw diameter 36 mm Stroke volume 153 cm³ Injection pressure 173 MPa Screw speed 98 g/s Clamping Unit Clamping force 900 kN Opening stroke 320 mm Max open daylight 700 mm Ejector stroke 100 mm Ejector force for / back 33 kN Media Oil tank 190 L Cedpfx Ajwvwchoddsaa This HAITIAN MA900 II eco was manufactured in 2016. It is a hydraulic injection moulding machine with a clamping force of 900kN and a shot volume of 153 cm3. Consider the opportunity to buy this HAITIAN MA900 II eco hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding