Engel Victory 200H200V/90 Combi (2009)

Engel Victory 200H200V/90 Combi

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,000 h, clamping force: 5,000 kN, screw diameter: 90 mm, total height: 2,355 mm, overall weight: 14,000 kg, product length (max.): 7,800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mold height: 350 mm • Maximum mold height: 900 mm • Platen opening stroke: 1,300 mm • Platen dimensions (W x L): 1,270 x 1,260 mm • Tie-bar distance (H x V): 910 x 830 mm Iiodpfx Anjx Nr Uxj Dsa • Motor power: 83 kW • Heater power: 61.2 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Status: In production Additional equipment • Robot (equipped)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,797 h, clamping force: 800 kN, screw diameter: 40 mm, total width: 2,042 mm, total height: 1,711 mm, overall weight: 8,200 kg, product length (max.): 4,545 mm, This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Additional information inclusive Wittmann Primus 16T robotTravel ranges: Z: 1250 mm, Y: 800 mm, X: 590 mm5 kg payloadControl system: Wittmann CNC8, Primus R8.3 softwareR8 Teachbox TouchVacuum circuit with additional 5/2-way valve • Injection Unit: 270 Powermaster with injection speed of up to 450 mm/s • Screw Diameter: 40 mm, type B, 3-zone screw • Nozzle Type: Pneumatically controlled needle valve nozzle with additional heating zone • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Clamping Force: 800 kN • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Hydraulic Unit: Fully integrated hydraulic unit 9 kW with 140 bar operating pressure • Pneumatics: 1 Air valve to 890 Liter, 1 additional Air valve to 890 Liter • Safety Cover Execution: Locked doors, top Isdpex D Rlpofx An Dsia • Operator Identification: User recognition via PIN • EUROMAP 67: Standard + dynamic retractionInterfaces: Colour feeder, Freely Configurable DIO: 4x Output/2x Input • Tool Monitoring: Available on DFP • Voltage Fluctuation Compensation: UPS presentExtrasSocket box 1:X2510, Cekon, 16A /400V, 3P-N-PE via HSX2511, Cekon, 16A /400V, 3P-N-PE via HSX2512, Cekon, 16A /400V, 3P-N-PE via HSX2513, Cekon, 16A /400V, 3P-N-PE via socket contactor(Function 0060)Sockets for colour dispenser:1X2507 / 1W7145, Schuko 10A / 230V, 1P-N-PE, via HSplus 1X9507 / 1W9507, Schuko 10A / 230V, 1P-N-PE, via HSMount sockets and base housings on bracket 110.180.6902(Function 0060)1X3123, Zone 12 HAN 4A screw-in, power only1X9123, Zone 12 HAN 4A screw-in, sensor only(Function 0110)Pneumatics 1, 1x3/2WV 890L, mounted on DAP, W2008(Function 0470)Pneumatics 9, 1x3/2WV 890L, mounted on BAP, W2016(Function 0470)Cooling water 1:X4051 W9088 Flow measurement B1135 - B1138 (return),Pressure measurement B1211 (flow)X4060 W9260 HAN16E Temperature measurementB0801 (flow), B0832 (return)(Function 0490)Cooling water 2:X4050 W9086 Flow measurement B1147 - B1150 (return),Pressure measurement B1212 (flow)X4059 W9259 HAN16E Temperature measurementB08813 (Flow), B0814 (Return)(Function 0490)Dosing 1C:1x suction conveyor and 1x paint dosing1X2018/1W7146, HAN 4A for paint dosing1X9191/1W9946, HAN 3A for suction conveyormount sockets and base housings on holder 110.180.6902(Function 0550)

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit Ijdsy Apdqspfx An Djia \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: good (used), Year of construction: 2001, Injection Molding Machine NETSTAL S 6000-5500E Basic Information Manufacturer: Netstal Model: S 6000-5500E Year of Manufacture: 2001 Operating hours: 88,933 h Clamping Unit Clamping force: 6,000 kN Mounting plate dimensions (H × W): 1,620 × 1,550 mm Tie-bar spacing (H × W): 1,020 × 1,020 mm Minimum mold height: 500 mm Maximum mold height: 1,000 mm Maximum mold opening: 1,950 mm Centering ring diameter: 160 mm Maximum ejector stroke: 280 mm Iijdpfx Ansyugcgs Dsa Injection Unit Screw diameter: 90 mm L/D ratio: 27 Injection volume: 2,290 cm³ Shot weight (PS): 2,196 g Maximum injection pressure: 2,410 bar Maximum injection speed: 4,453 cm³/s Machine Dimensions and Weight Clamping unit dimensions: 7.21 × 2.40 × 2.50 m Injection unit dimensions: 4.60 × 2.61 × 2.50 m Total machine weight: 62,000 kg (62 t) Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system that enhances the energy efficiency of hydraulic injection molding machines. The system controls the operation of the hydraulic pump motor using a frequency inverter, which adjusts the motor speed to the actual requirements of the production cycle. As a result, electrical energy is only consumed when the machine actually requires it. Benefits of the ESS System - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduced energy losses during idle operation - Lower heating of the hydraulic system - Extended service life of hydraulic components - Can be retrofitted to existing hydraulic injection molding machines The ESS system allows for significant reduction of machine operating costs while maintaining full production parameters.

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 with the Wittmann W721 robot Year of construction: 2004 Injection unit: Screw diameter: 30 mm Injection weight: 89 g Injection pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Original mold crane Iodpfx Ajy Dqbyjn Deia Robot Wittmann W721 Year of manufacture: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Travel in axes: X-550, Y-1200, Z-1250 Touch control panel Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request