Band saw

EVERISING H-260 HB NCIII

Condition: like new (used), Year of construction: 2008, YEAR : 2008 Year MAXIMUM PRESSURE OF THE RAM : Ton. 2.000 Ram capacity SLIDE STROKE : mm. 1500 Slide strok TABLE DIMENSIONS : mm. 5000 x 2380 Table size PRESSION OF THE BLANKHOLDER UPPER : Ton.300 Blankholder STROKE OF THE BLANKHOLDER SLIDE : mm. 200 Cushion stroke ram RAPID SPEED : mm/sec 220 Fast stroke PRESSION OF THE BLANKHOLDER CAPACITY : Ton. 600 Cushion capacity STROKE OF THE BLANKHOLDER SLIDE : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 9,145 Ground up to floor FRONT LIGHT: 5000 mm Nedpfjvm Eixex Aflocw Distance btw uprights TOTAL WEIGHT: KG. n.d

Condition: good (used), Year of construction: 2001, Cutting 90°: 330 Cutting flat 90°: 330 x 330mm Cutting speed Vario:12 - 120 Circle blade size: 6830 x 41 x 1,3mm Ncedju R R Acepfx Aflew Power: 7.5kW Length: 4600mm Width: 2150mm Height: 2310mm Weight: 4300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2013, Wire erosion / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 350 mm max. workpiece size X: 800 mm max. workpiece size Y: 570 mm max. workpiece size Z: 340 mm Nodpfx Afoy S Tgzjlscw max. workpiece weight: 1000 kg table size X: 1050 mm table size Y: 710 mm with AWF ( Automatic Wire Feeding ) U / V axis: 150 x 150 mm submerged CNC Control: SPW

Condition: used, number of spindles 4 bore capacity in steel (diameter) 23 mm bore stroke 150 mm Nedet Hw U Nopfx Afljcw total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Nodpfxjgbfaxe Aflscw Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Condition: excellent (used), Year of construction: 2007, turning length: 535 mm, spindle bore: 65 mm, travel distance X-axis: 225 mm, travel distance Z-axis: 535 mm, spindle motor power: 26,000 W, total height: 1,900 mm, total length: 2,900 mm, total width: 2,300 mm, overall weight: 4,380 kg, CNC Lathe MAZAK - QTN 200-II MACH-ID 9481 Nsdpfjyyxh Tjx Aflscw Make: MAZAK Type: QTN 200-II Control: Mazatrol Matrix Nexus Year: 2007 Max. turning Ø:610mm X-Axis: 225mm Z-Axis: 535mm Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 26kW ATC / revolver:12 Chip conveyor: Yes Tool eye: Yes Hours: 5049H Length: 2900mm Width: 2300mm Height: 1900mm Weight: 4380kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2023, saw band length: 5,450 mm, saw band width: 41 mm, Double column bandsaw fully automatic Everising H-460 HB Cutting range round: 0 - 460mm Cutting range square: 460 x 460mm Bundle tension: Width: 195 - 310mm Bundle tension height: 120 - 230mm Drive power: 5.5 kW Saw blade dimensions: 5450 x 41 x 1.3mm Weight: 3030 KG Machine dimensions: 2820 x 2190mm The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw band tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush - Automatic belt breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor Ncsdpfxoq Ulxgj Afljw - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Make Altendorf Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Tabletop extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee Nsdpfx Afovxlq Holocw

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 460 mm, cutting range round steel at 90°: 150 mm, working height: 1,030 mm, MSK 471 NA automatic straight cut circular saw for HSS and carbide saw blades Nsdoubbw Aepfx Aflscw Cutting range round up to 150 mm, square up to 140 mm Suitable for almost all profile shapes and solid material Automatic cut-off sorting by means of cut-off gripper Machine tested at KALTENBACH, wear parts replaced

Condition: excellent (used), Year of construction: 2021, Twin-spindle version With milling head with C-axis with Y-axis with driven tools FANUC Series 31i Model 5 control Turning diameter - 540 mm Turning length - 1040 mm Y-axis travel 170 mm (+/- 85) Spindle taper ASA A2-6 Spindle speeds 5,000 rpm each C-axis indexing 0.001° Milling head B-axis 240° Indexing 0.001° Spindle speed 12,000 rpm Turret with 12 driven positions Tool magazine with 80 positions Part pick-up device Tool measuring system LNS Sprint 565 S2 bar feeder Misc. accessories Ncodpfx Afjzbr Aloljw MARCELS MASCHINEN CH