Disc harrow

Evers Morgan VS500 Scheibenegge

Condition: used, Year of construction: 2016, Equipment: compressed air brake, Automatic dosing system Fold-down scraper floor 3rd jockey wheel under pick-up / 6905 loads Self-steering axle Drawbar suspension hydraulic Axle suspension / mechanical LoadSensing PickUp 40 knives Cutterbar LED light package / force measuring bolt for L Dwjdpfxstpn Tpe Ap Dsc

Year of construction: 2023, condition: new, Continuous power: 20.12 kVA / 16.10 kW Voltage: 230 V / 400 V Frequency: 50 Hz Engine: Perkins 404J-22G Fuel: Diesel Tank capacity: 51 liters Generator type: IP21 protection class, MeccALte Starting mode: electric Dwodpfemw Ui Rox Ap Doc Generator with AVR control Dimensions and weight: Length (mm):1645 Width (mm):870 Height (mm):1072 Weight, dry: 640 kg

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm Dwedpfx Aportrvye Doc -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller Dedpfx Aexfrv Eep Dswc CNC Top Ten bv Coevorden, Netherlands

Condition: new, Year of construction: 2026, functionality: fully functional, Grinding Wheel Dressing Machine: Easy to Operate, Robust, and Precise Our grinding wheel dressing machine with enclosure offers you an unbeatable combination of easy operation and exceptional stability. The solid granite bed ensures the highest precision and durability, while the user-friendly operation maximizes efficiency in your workshop. While you continue production on your tool grinding machine, our dressing machine saves you time and, therefore, money. Ideal for those who value reliable performance and top value for money! Dwedpjubbrtjfx Ap Dsc

Year of construction: 2022, operating hours: 0 h, condition: new, Carrier weight: 20-33 tons Operating weight: 1800 kg Oil flow rate: 130-180 l/min Oil pressure: 150-170 bar Chisel diameter: 140 mm Impact frequency, Auto Start / Auto Stop mode: 400-800 bpm Sound power level: 120 db(A) Dodpsiwxnvofx Ap Dowc

Condition: new, Year of construction: 2026, Machine Description 1. Worktable Sectioned vacuum worktable with FOUR independent vacuum zones, manufactured from rigid and durable HPL panels. Each zone features vacuum ports connected via a piping system to the vacuum pump. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces in various sizes. T-slots are also provided for manual workpiece clamping when required. 2. HQD Spindle High-quality 9 kW brushless HQD spindle, powered by an inverter with built-in overload protection. High-speed electro-spindle equipped with an innovative air-cooling system. Designed for automatic tool changing (ATC), significantly reducing machining time by eliminating manual tool changes. 3. Drive System High-performance, energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, ensuring excellent machining quality at high feed rates. Brushless servo motors driving the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. X and Y axis movement is transmitted through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for long-term reliability. All axes are equipped with professional HIWIN linear guide rails, which undergo strict quality inspections and testing throughout the manufacturing and assembly process. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining operations, resulting in improved surface finish and machining accuracy. 5. 8-Position Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC), supplied with ISO30 tool holders and ER32 collets. Included collets: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump (Optional) & Dust Extraction Hood Four independent vacuum zones for efficient workpiece holding. Pneumatically operated dust extraction hood mounted around the spindle, allowing connection to virtually any dust extraction system while maintaining a clean working environment, improving operator safety, and preserving machining accuracy. Technical Specifications Parameter Value Working Area 2100 × 3200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Dwsdpjvupcrefx Ap Dsc Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump 2 × 7.5 kW (optional) Software UCanCAM V13 (Polish language version, optional) Machine Dimensions 4070 × 2870 × 1900 mm Machine Weight 2050 kg

Condition: good (used), Friedrich Deckel FP 2 LB Tool Milling Machine The accessories are not included in the scope of delivery but can be purchased in another auction at this link. Lot of Milling Tools The universal milling machine Deckel FP 2 LB is characterized by its extremely stable base and is designed as a floor-standing machine. This means that the machine retains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as American V8 engines. Furthermore, the long travel of 800 mm is advantageous in this application. Technical data: Deckel Universal Milling Machine FP 2 LB Digital display: 3-axis digital display Heidenhain Travel X-axis: 800 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Tool holder: SK 40 clamping thread S 20 x 2 Milling head type: Vertical milling head Speed range: 40 - 2000 rpm Number of steps: 18 Table type: universal swivel/tilt table (± 45° / ± 15°) Djdogyw S Tepfx Ap Djwc Table clamping surface: 1000 x 520 mm T-slot size: 16 mm Vise 160 mm Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Wood Splitter 30t HS-30PE PRO With a splitting force of 30 tons, the SCHORR HS-30PE handles even the toughest wood and large logs with ease. Its heavy-duty design (own weight 390 kg), low-wear hydraulic system, and high-strength steel frame ensure a long service life, ultimate stability, and reliable operation—even in continuous use. Combined Drive: PTO & Electric Motor The HS-30PE can be operated either via PTO (540 rpm) or the integrated 400V electric motor. This offers maximum flexibility: mobile operation in the forest with a tractor, or emission- and noise-free at the yard. Robust Design—Engineered for Heavy-Duty Use The construction features high-strength steel components and a stable splitting wedge guide. Sturdy support legs provide firm footing, and large transport wheels ensure easy relocation—even on uneven terrain. Splitting Length up to 110 cm Even long trunk sections are processed with ease. The solid splitting blade made of tool steel guarantees a precise splitting line and minimal wear. Integrated Timber Lifter—More Comfort & Safety The timber lifter allows easy, effortless positioning of heavy logs and also acts as a protective guard—greatly simplifying everyday work. Two Return Modes & Speed Settings -- Automatic Return: The splitting wedge automatically returns to the preset position—ideal for fast operation. -- Manual Return: For precise splitting, particularly with irregular wood. In addition, there is a fast advance mode and a slow, high-power mode for actual splitting. Practical Features for Everyday Use -- Lowerable cylinder (down to 1.99 m) for easy transport and space-saving storage -- Two-handed safety operation for maximum protection -- 3-point hitch (Cat. I & II) for convenient tractor transport Technical Data -- Manufacturer: SCHORR -- Model: HS-30PE -- Splitting force: 30 t -- Weight: 390 kg -- Drive: 400V electric motor (5.5 kW, 16A) or PTO Dimensions: -- Length: 1550 mm -- Width: 1150 mm -- Height: 2500 mm (lowered 1990 mm) -- Hydraulic cylinder: Ø 13.8 cm -- Piston rod: Ø 7 cm -- Splitting wedge: 26 cm -- Log diameter: max. 40 cm / min. 8 cm Djdpfxow R N Hmj Ap Dewc -- Wedge-ground clearance: 16 cm Speed: -- PTO: Forward 5.5 s / Return 9.5 s -- Electric: Forward 7.5 s / Return 14.5 s Your Advantages at a Glance -- Ready for immediate use—no long waiting times -- Heavy-duty design—390 kg net weight for maximum stability -- Flexible operation—tractor or 400V connection -- Convenient timber lifter for handling heavy logs -- Spare parts always available -- Professional service & support Whether delivery or collection in 48465 Schüttorf—we offer the right solution.

Condition: good (used), Year of construction: 2012, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 2.172 kg Functional Generator capacity: 60 kVA CE mark: yes Dedpfx Apjx H Nlis Dowc Condition Technical condition: good Visual appearance: good Other information Fuel consumption: Diesel Delivery terms: EXW Water tank volume: 390 l Additional information Please contact Christian Theißen for more information Manufacturer: SDMO Model: R66C2 Year of build: 2012 Condition: Used Data: Performance: 60 kVA Engine: John Deere Length: 234 cm Width: 108 cm Height: 190 cm Tank capacity: 39 l / Diesel Required connection: 2x 230 V/16 A, 1x 380 V/16 A, 1x 380 V, 63 Ao. Klemmleiste. Drive type: Diesel Operating noise: 88 dB Own weight: 2.172 kg Weight: betankt 2.500 kg Own weight: 2.172 kg Special features: Lifting eye, consumption of approximately 14.75 liters per hour. On Weijer trailer. Location: 41468 Neuss immediately available