Industrial robot

FANUC ARC Mate 120iC R-30iA

Condition: new, Year of construction: 2018, functionality: fully functional, Hello we offer here a brand new climate outdoor unit from Toshiba. Guedpfjlc Eukex Ah Djk The device was built in 2018 but was never installed. The device has 45kW.

Condition: used, Year of construction: 2019, x-travel 800 mm y-travel 1020 mm z-travel 970 mm Control TNC640 B - axis 360 x 0,001 ° feed B-axis max. 50,00 U/min A - axis -185 / +45 x 0,001 ° feed A-axis max. 25,00 U/min feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206,00 / 159,00 Nm spindle diameter in front bearing 80 mm Gedpsxn Amaefx Ah Djuk tool taper HSK-A63 tool magazin: 70 tool length - max. 500 mm tool diameter 118 mm tool diameter with 2 vacant positions 260 mm tool total weight 22,00 kg Chip to chip time 4,2 sec. size of pallet Ø 770 mm workpiece weight 800 kg interference diameter 900 mm total power requirement 35,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 7,00 x 3,50 x H3,50 m 5-axis machining center with Heidenhain TNC640 control, integrated KNOLL coolant system KF220, coolant high-pressure 23bar, coolant through the spindle, chip conveyor, measuring probe Heidenhain TS640, electromechanical tool length check, Swivel axis calibration GSC, collision monitoring "DCM Collision", BLUM-Laser, GROB Spindle-diagnosis (GSD), kinematics-set.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Guedped Tiu Eofx Ah Djk Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: U268893501006, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 805 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 16,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 90, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highligts: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - 90 tools in system - ready for automation ___ Basic machine G350-1006 access-SERIE Travel path X-axis: 600 mm Travel path Y-axis: 770 mm Travel path Z-axis: 805 mm Power supply 400 V, 50 Hz, TN-S Compressed air system, operating pressure 5 bar, minimum inlet pressure 5 bar Work area door, automatic, for manual and automatic loading/unloading Decentralized mist collector unit for the work area Machine protection concept for emulsion machining Work area lighting Machine paintwork according to GROB standard Machine cooling system with air-cooled cooling unit (4.0 kW) Operating/environmental conditions according to GROB standard Electrical equipment according to EU GROB standard Stainless-steel internal work area enclosure Fluid cabinet doors HEIDENHAIN TNC 640 machine control Control interface (HMI) in the German language Swivel axis calibration GSC Classic Interface (software and hardware) for connection of an automation system Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW GROB spindle diagnosis GSD Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Palette 400 x 400 mm, grid holes, without pallet changer hook Premium package -Scraper conveyor, discharge height 1,100 mm -Cutting fluid filter system -Cutting fluid tank -High-pressure cutting fluid system (5-40 bar, IKZ) -Cutting fluid low-pressure system Compressed air feed through spindle center Oil skimmer for cutting fluid care Flushing unit for the base of the work area Flush gun at the work area Flushing unit (Z-axis) Gsdpfx Ahew Eiw Nj Deuk Machine status light, 3-colored Preparations for use of radio and infrared signal receiver (RENISHAW) Infrared probe OMP60 (RENISHAW) Remote machine diagnostics with access control switch 3-month warranty

Condition: like new (used), Hello, we offer here a used Erowa adapter pallet PowerChuck P automatic, pallet was only for demo purposes in use. Condition as new. ER-115304. shipping and inspection possible For questions we are happy to answer. Gedpfx Aslz Nb Neh Douk

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 24 h, load capacity: 3,000 kg, lifting height: 6,000 mm, free lift: 1,718 mm, fuel type: electric, mast type: triplex, construction height: 2,643 mm, fork carriage width: 1,750 mm, fork length: 1,200 mm, empty load weight: 5,814 kg, total length: 1,600 mm, drive type: Elektro, construction width: 1,540 mm, Four-way sideloader Load center: 600 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Godpfx Ahev Tf Ars Djuk Technical condition: very good Front tires type: solid rubber Front tires size: 406 x 176 mm Front tires condition: 80 - 100% Rear tires type: solid rubber Rear tires size: 559 x 254 mm Rear tires condition: 80 - 100% Battery voltage: 48 V Battery Ah: 930 Ah Battery year of manufacture: 2025 Battery condition: new Integrated sideshifter (+/- 100 mm) Hydraulic fork positioner (closed width 290 mm, maximum open width 1,750 mm) (from outside to outside at Forks) 3rd valve, 4th valve, rear work lights, front work lights, heating, full cab, full free lift, CE certificate, safety light, LED work lights (2 forward and 2 side), flashing light, reverse alarm. Color: Combilift Hi-Vis Green (RAL 6018) and Gray. Auxiliary hydraulic control valve with 2 hoses ending at the fork carriage.

Condition: excellent (used), Number of paletts 18 Gujdpfxsilp Eue Ah Dok Carrying force 25 kg Max. height of workpiece 350 mm Max. diameter of workpiece 230 mm Misc. accessories MARCELS MASCHINEN AG

Condition: like new (used), Year of construction: 2007, operating hours: 300 h, functionality: fully functional, machine/vehicle number: PSW-L, Used in very good condition, only 300 operating hours, 3 pallets included, documentation included Godpfx Ahou A Ddwe Djuk

Condition: used, Year of construction: 2002, Technical details: turning diameter: 475 mm turning length: 1500 mm control: HEIDENHAIN MANUAL PLUS 4110 turning diameter over slide: 260 mm turning speeds: 3000 U/min turret head: 12 Pos. spindle bore: 78 mm quill stroke: 120 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 3,2 x 2 x 1,9 m Gujdpfxjxhqqme Ah Dok SAUTER turret 12 pos. , VDI 30 chipconveyor, 4-jaw chuck approx. 74.000h "machine on" *

Year of construction: 2013, condition: excellent (used), 1 x oil cooling unit Gsdpfx Ahekhigfe Dsuk Deryun DJ 2.5 RSA-400V-CE year of manufacture: 2013 in very good condition. The oil cooler can be visited.