Condition: used, for taps up to: M 6 Lsdpfx Aeb Ez Iuebcjhd Mounting shank: MK 1

Condition: good (used), Cutting range, internal thread: M 2 - M 12 Working radius approx.: 1650 mm Ljdpfx Absd D U T Hscohd

Condition: used, throat 215 mm thread M2 - M10 Ledpfoyv N Ddjx Abcshd thread depth max. 60 mm spindle MK 2 bore depth 90 mm 150 bis 450 mm 220 x 285 mm column diameter 75 mm mm Total height 950 mm motor speeds: 700 / 1400 1/min weight of the machine ca. 95 kg

Condition: used, ORT RP12 2-roll Lhsdpfxeyvk S As Abcod 12 ton Thread rolling machine The machine is in our warehouse, under power

Condition: good (used), Threading machine, pipe thread cutter, thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -for pipe size: max. 2 inches -Cutting jaws: 1/2"-2" inches Lsdpfxscmtn Ej Abcohd -Operating voltage: 380 volts -Weight: 100 kg

Condition: used, Drilling and Tapping Machine FLOTT Model TBZ 15 GL Serial No. 32177027 Year of Manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MT2 Throat depth: 195 mm Quill stroke: 80 mm Table size: 275 x 200 mm Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Power connection: 380 Volt, 50 Hz - Spindle speed selection via 2 motor speeds, 6 belt steps from the motor and 2 belt steps to the spindle - Drilling head height adjustment via crank and rack on the column Lsdsdzp S Nspfx Abcjhd - Tapping device with guide bush and selector for right- and left-hand threads - 3 guide bushes for right-hand threads: 0.7 mm, 0.8 mm, and 28G included - Tapping possible with or without guide bush - 1 geared drill chuck Ø 1.5 to 13 mm - Foot switch for cycle start - Emergency stop - Original metal base included Space requirements (L x W x H): 700 x 350 x 1850 mm Weight: 165 kg Good condition

Condition: ready for operation (used), workpiece diameter (max.): 50 mm, Ready-to-use centerless with spare wheels, can be tested on site! Ljdpfx Absyvn A Socehd

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Lhsdpfoyurx Tjx Abcjd Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: used, THOMMEN Rouleuse de filets is a thread rolling machine, engineered for precision, high accuracy and reliability. Working capacities (diameters, modules, lengths, travel ranges, workpiece dimensions) are not specified in the provided data. Main technical specifications (spindle speeds, feed rates, power supply, dimensions, weight) are not indicated in the available information. It enables achievement of tight tolerances and is suitable for automotive, watchmaking, machine tools, aerospace and medical applications. Ledpfxsyr Hf Nj Abcshd

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Hydraulic Thread Cutting Machine / Tapping Arm from CMA Model RHR(M) 30 D+ (demonstration unit) Technical Data: Year of manufacture: 2025 Speed: ÷125 + ÷500 RPM Torque: 255 + 64 Nm Mount: 2/Ø31 Radius: 1800 mm Capacity: M4–M30 (steel) Weight: 290 kg Lhjdpsyq Hf Tofx Abced • Articulated arm technology: Effortless positioning of the tool above the workpiece. • Operator relief: Absorption of reaction torque protects the operator. • Quick-change system: Tool-free change of threading inserts with slip clutch. • Reduced tool breakage: High stability and precise guidance prevent tap breakage. • Increased efficiency: Significantly faster processing times compared to manual methods or large machining centers.

Condition: not inspected (used), functionality: unexamined, throat depth: 1,200 mm, machine/vehicle number: 94023588, No minimum price – guaranteed sale to the highest bidder! Lhsdpfx Absyn H Rdjcjd Placing a bid obligates you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Reach: 1200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1200 x 1000 x 700 mm Machine weight: 80 kg External reference: Pieper - Lot 68

Condition: ready for operation (used), Year of construction: 1985, A thread and worm grinding machine Reishauer AG is available. Grinding length: 450mm, clamping length: 700mm, max. grinding diameter: 200mm, max. pitch: 80mm, max. workpiece weight: 100g, max. lead angle: +/-25°, grinding wheel diameter: 275mm/350mm, speed: 1850rpm. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1600mm, weight: approx. 3400kg. Including oil centrifuge, hood, oil mist extraction and various accessories. The splash curtain is slightly hardened. Documentation available. An on site inspection is possible. Ljdpfx Abox Dm Dnocehd

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, Thread cutting head model 5008 Lsdpfxsyquwqs Abcohd -Pipe size: 1/4 to 1" -built-in cutting jaws: 1" -Dimensions: 190/240/H75 mm -Weight: 3.4 kg

Condition: new, R425-1G4S7 NSK TAPERED SINGLE ROW ROLLER BEARINGS NEW, NEVER USED Main Demensions: 425 x 700 x 150 mm Weight 216 kg Lhodsqpf T Iopfx Abcjd 2 units available WAREHOUSE LIQUIDATION

Condition: new, STF374KV5051GAS3 FOUR ROW TAPER ROLLER BEARINGS NSK NEW, NEVER USED Main Demensions: 374,65 x 501,65 x 250,83 mm Weight 156 kg 3 units available Ledpfx Aboqpfvbscehd WAREHOUSE LIQUIDATION

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling Lodpfx Asv T Truobcohd - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: excellent (used), ROLLER THREADING MACHINE KING2 SET C R1/2-2. Lhsdpfxovgng Ho Abcsd Threading machine, electric Design: sturdy, maintenance-free gearbox with special ratio for perfect power transmission, left/right handed, with thermal overload protection and emergency stop. Self-reinforcing clamping effect by diagonal adjustment of the clamping screw. Stable torque support for torque support in both directions of rotation. Easy and quick replacement of cutting heads. Unique locking of the cutting head in the ratchet lever, guaranteeing secure seating during threading. Supplied with Central cutting heads and carrying case.

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1700 Electric Tapping Machine – Advanced Threading for Industrial and Workshop Applications The CORMAK RGE36PWx1700 electric tapping machine is an advanced threading solution that performs exceptionally well in both large production plants and smaller workshops. Design and Technology of the CORMAK RGE36PWx1700 Tapping Machine The CORMAK RGE36PWx1700 features a robust construction that enables efficient and precise threading in a wide range of industrial environments. It is powered by a servo drive, ensuring reliable operation and precise control of tapping parameters. Thanks to the tapping arm and rotating motor assembly, the machine can cut threads in various materials such as steel, stainless steel, aluminum, and non-ferrous metals. The tapping arm is equipped with a quick-change chuck, allowing fast and easy installation of taps. Adjustable overload clutches integrated into the tap holders provide additional protection against tool damage during operation. This system also allows precise torque adjustment, ensuring high threading accuracy. Precision and Work Efficiency of the CORMAK RGE36PWx1700 The performance of the CORMAK RGE36PWx1700 is the result of modern technology combined with a heavy-duty design, ensuring long-term, reliable operation. The servo drive and rotating arm deliver high precision while maintaining fast threading cycles. Adjustable rotational speed and thread depth make the machine ideal for cutting threads with varying specifications. Lhsdpfx Absycdhpoced The threading process is further supported by a micro-spray system that effectively cools the tools, improving efficiency and extending tool life. Standard Equipment – CORMAK RGE36PWx1700 Touchscreen control panel – easy programming of tapping parameters such as rotational speed, tapping direction, and thread depth Rotating tapping arm – enables thread cutting at any angle Tap holders with adjustable overload clutches – protect the machine from excessive load and ensure long service life Micro-spray lubrication system – continuous tool cooling with minimal coolant consumption Chip blower – effective chip removal and improved visibility during tapping Technical Specifications – CORMAK RGE36PWx1700 Power: 2 kW Power supply: 230 V Weight: 56 kg Maximum arm reach: 1700 mm Maximum rotational speed: 125 rpm Included in the set: Tap holders for tap sizes from M5 to M36 *The machine is sold without a worktable, vise, and taps.

Condition: used, Year of construction: 2015, thread dia. 20 - 80 mm grinding length 3500 mm thread pitch . mm threading lenght min./max. 50/3500 mm centre height 400 mm workpiece length - max. 4000 mm control Siemens 840-Dsl Ledpfx Abow Ed S Ujcshd feed speed u-axis 0 - 2500 mm/min feed speed w-axis 0 - 2500 mm/min feed speed b-axis 100 1/min total power requirement 45 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,7 x 4,6 x 2,9 m Thread Grinding Machine / Profile Grinding Machine, suitable for: - the thread grinding of single and multi-start ball screws with gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter worn 350 mm - bore diameter 203.2 mm - shaped diamond roll: - diameter 121.3 mm - radius 0.5 mm - driver flange for workpiece diameter 15-70 mm - driver: - for 10-32 mm drive diameter on the workpiece - for 31-60 mm drive diameter on the workpiece - for 60-105 mm drive diameter on the workpiece

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 308, Technical characteristics: ⚙️ Core Specifications Attribute Value Thread Diameter Range: 3 mm to 75 mm Rolling Pressure: 0.5 to 20 tons Max Thread Length (Plunge): 160 mm Max Thread Length (Through): 2000 mm Speed Range: 24 to 114 rpm (8-step gearbox) Lhsdjxx Nuxspfx Abced Tool Diameter: 145 mm to 200 mm Roll Spindle Diameter: 54 mm Shaft Distance: 130 mm to 200 mm Machine Dimensions (L×W×H): 1880 (INCLUDING HYDRAULIC UNIT) × 991 × 1270 mm Weight: ~1.6 tons 🧰 Features & Capabilities Variable Rolling Pressure: Adjustable to suit different materials and thread profiles. Heavy-Duty Construction: Built for long-term industrial use with high repeatability. Manual or Semi-Automatic Operation: Depending on configuration and accessories. Machine status: WORKING

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller model: SIEMENS SINUMERIK 810, workpiece length (max.): 830 mm, milling spindle speed (min.): 100 rpm, milling spindle speed (max.): 4,500 rpm, mount diameter: 78 mm, TECHNICAL DETAILS Milling spindle speed range: 100 - 4,500 rpm Maximum workpiece length: 830 mm Maximum workpiece diameter with double tooling: 135 mm Spindle mount: 2 x SK 40 Spindle nose: DIN 55026 Size 5 Mounting diameter: 78 mm Center distance: 135 mm Front bearing diameter: 110 mm Workpiece Slide (X-Axis) Workpiece slide travel: 810 mm Max. feed rate: 6 m/min Clamping surface: 200 x 1,750 mm Tool Post (Z-Axis) Tool slide travel: 120 mm Max. feed rate: 2 m/min Tool post adjustment: 200 mm Tailstock Tailstock quill travel: 100 mm Morse taper: 3 MT Centre height: 260 mm Quill center distance: 135 mm Steady rest through-hole: 40 - 80 mm MACHINE DETAILS Drive power: 5100 W Control system: SIEMENS SINUMERIK 810 Lhsdeyl U Tuepfx Abcjd Dimensions & Weight Dimensions (L x W x H): approx. 3.20 x 2.66 x 1.76 m Machine weight: approx. 6.5 t EQUIPMENT Various tool holders Steady rests Centre points, medium Coolant system

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Lhsdpsuz If Nsfx Abced Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Lhsdpoh A S Htjfx Abced Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: EAF266970118, with subframe 250, foldable. With RIDGID No. 815A automatic cutting head without jaws, item 277109. The machine was acquired for a larger project and has only been used sporadically since then. Lhodpfxsytpfue Abcjd

Condition: not inspected (used), Year of construction: 1967, functionality: unexamined, machine/vehicle number: 20590, overall weight: 5,000 kg, controller model: SIEMENS  COROS OP 15, roller width: 38 mm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates timely pickup between 08.04.2026 and 16.04.2026! TECHNICAL DETAILS Thread rolling diameter: 200 mm Roll width: 38 mm MACHINE DETAILS Control system: SIEMENS COROS OP 15 Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,000 x 2,200 mm Weight: 5,000 kg Lhodpfsyk U T Ssx Abcsd