Thread Rolling Machine

SENY D.44. EH

Year of construction: 1995, condition: good (used), 2 Die Thread Rolling machine SENY, Type D-44 EH, Versatile for all types of work, manual and automatic cycles, easily adapted to automating loading,range of cycle times and roll speeds.operating pressure 100Kn, workpiwcw min 3mm max 40mm,lead 3,5 max, pitch of serrations 1,75mm max, roll length 80mm, diameter roll min 80mm max 120mm,roll spindle speeds 47-94, roll spindle diameter 40mm,distance between rolling spindles 80mm minim 165mm max, working stroke 7, feed 0,5mm/s minim 6mm/s maxim, rolling time,variable 0,1-100 seg, swivelling roll spindles +-5º,main motor 3Kw, connected electrical load 4,68kw, tank capacity 150L,aprox weigth 1100kg Kwjdpfopwbvkjx Adwst

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. ·There is a movable table that travels in both longitudinal and transverse directions. Kwedsw Rv Taepfx Adwst ·Manual lubrication with cooling. ·The machine is capable of honing. ·Pendulum movement in rapid traverse between two adjustable end positions is possible. *

Condition: excellent (used), Year of construction: 2015, Roll pressure infinitely adjustable from 240 kN feeds - fine adjustment 0,5-45 mm/min turning speeds 0-80 U/min Swivel angle of the roller heads 11 ° Diameter of the roller spindles 69,85 mm Stroke - Roller screw slide 0-150 mm min. dist. - roller screws 138 mm max. dist. - roller screws 285 mm min. diameter - Rolling tools 230 mm max. diameter - Rolling tools 135 mm min. dia. 2 mm max. diameter 55 mm thread length at plunge operation 200 mm thread length at continiuous operation 2000 mm maximum thread pitch 4 mm total power requirement 14 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 2,5 x 1,9 m Rolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Kwjdpfx Adsxukrqjwet Rolling spindle length: 200mm Machine bed height: 810mm Rolling spindle height above machine bed: 200 mm Height of support bearings: 115 mm Largest pitch for serrated teeth: 2.5 mm (up to 70 kg/mm2 Strength of the material)

Condition: excellent (used), Year of construction: 2011, EMCOturn E45 CNC lathe with C-axis Year: 2011 turning diameter 220 mm turning length 310 mm control Siemens 828D turning diameter over bed 430 mm spindle bore 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Positions C-axis driven tools total power requirement 17 kW Transport dimensions ca. 3,3 x 1,5 x 1,95 m machine weight ab. ca. 3.300 kg Accessories/options: - C-axis and driven tools - driven tool holders axial and radial - static tool holders - documentations - backup - footpedal Kwsdexvcrxspfx Adwet - tailstock - parts cather - 3-jaw hydraulic chuck - coolant tank Runned hours: 8173 Under power in our warehouse!

Condition: used, Article: clamping head Manufacturer: Different Kedpfx Aden H Nzujwowt For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 2004, operating hours: 1,09,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets Kedpfx Aoxcp Sljdwowt - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor - Handheld control unit - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Kwsdpour Hfzsfx Adwet Fanuc 310is controller

Condition: good (used), Year of construction: 2002, From company liquidation: Kjdst Iklkepfx Adwewt Peddinghaus Peddimax 1002 Year of manufacture 2002 Max. Punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Contact length stop Many accessories (special punches) Special punching device SV 90 up to 90 mm holes Weight: approx. 3,000 kg

Condition: used, Year of construction: 1982, grinding length:500 mm grinding width:225 mm workpiece height:400 mm total power requirement:5,5 kW weight of the machine ca.:3,4 t Kwedpfxecxxtms Adwot NC81 NC-control, table belt drive 100-25000 mm/min., automatic feed, electronic dressing unit 020 NC-K with RPM-compensation, coolant pump, emergency cut-off

Condition: used, Year of construction: 2009, Offered here is a used machining center from the manufacturer Deckel Maho DMG. The machine is powered up and can be inspected at our facility. Free loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel distances X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Max. rotation of table plate: 30 rpm Spindle speed: 20 - 8,000 rpm Gear stages: 2 Max. workpiece diameter: 1250 mm Max. workpiece height: 1580 mm Clamping surface: 800 x 800 mm Max. workpiece weight: 1,500 kg Weight of pallet: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Max. tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of machine (without magazine or other accessories): approx. 20,000 kg Kodpsw Ew T Ssfx Adwswt Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30 bar (new) 1x ZAHNRADP-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox *F1C-A25 (new) 1x Conversion kit power module (new) 1x Lifting devices for the machine