Industrial robot

FANUC M-20iA

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00618, load capacity: 20 kg, arm reach: 1,813 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-20iA/20M manufactured in 2013.03. The robot comes with an R-30iB A-Size controller including iPendant. Gisdozcmb Sjpfx Albeu   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA/20M Model Number: A05B-1222-B702 Year of Manufacture Robot: 2013.03 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1813 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2013.03 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Gijdpfxswnx Uis Albsu Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00580, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-20iA manufactured in 2013.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA Model Number: A05B-1222-B202 Year of Manufacture Robot: 2013.05 Warranty term (months): 12   Payload (kg): 20 Giedpfxjzcfvzj Albsu Reach (mm): 1811 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2013.05 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), functionality: fully functional, overall weight: 250 kg, load capacity: 20 kg, arm reach: 1,813 mm, controller manufacturer: Fanuc, controller model: R-30iB, Fanuc M-20iA/20M with R30iB Controller, fully refurbished and with 6 months warranty - delivered into Europe duty paid so there will be no additional fees on top. Gisdpfjzcd Tljx Albsu

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,792 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine. • Electrical: • Voltage: 354 / 488 V • Phase: 3 • Frequency: 50/60 Hz • Full load: 40 A • Largest load: 70 A • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical • Machine hours (from control): Giedpfx Asx D I Smjlbou • Power on time: 19,635 h • Cycle start time: 8,564 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 side-mount ATC • Control unit: Haas CNC Control

Condition: used, Year of construction: 2019, The 2019 FANUC M-20iA/35M with R-30iB Mate Plus controller is a high-inertia, medium-payload 6-axis industrial robot designed for heavier tooling, larger grippers, and demanding material-handling applications. Compared with the standard M-20iA/20M, the /35M version increases payload to 35 kg and has a stronger wrist for higher moments/inertia, making it popular for machine tending, part transfer, and multi-gripper applications. Key specifications Robot model: M-20iA/35M (high-inertia version) Controller: R-30iB Mate Plus (compact controller cabinet) Axes: 6-axis articulated robot Giodpozazkpofx Albsu Payload: 35 kg Reach: 1813 mm Repeatability: ±0.03 mm Robot mechanical weight: ~252 kg Mounting: floor, inverted (ceiling), or angle mount.

Condition: used, Year of construction: 2018, The 2018 FANUC M-20iA with R-30iB Mate controller is a medium-payload, 6-axis industrial robot commonly used for machine tending, material handling, loading/unloading, dispensing, and general automation. In 2018, it was typically paired with the compact R-30iB Mate controller cabinet. Key specifications Robot model: M-20iA (6-axis articulated robot) Controller: R-30iB Mate (compact cabinet version) Payload: 20 kg Reach: 1811 mm (about 71 in) Gisdozazg Dopfx Albeu Repeatability: ±0.08 mm Robot mass: ~250 kg Mounting options: floor, ceiling/inverted, or angled mounting.

Condition: ready for operation (used), Year of construction: 2020, Control Unit Brand HAAS Model NGC Main Drive Number of axis 3 Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm This 3-axis HAAS VF-4 vertical machining center was manufactured in 2020. It features a 1270 mm X-axis, 508 mm Y-axis, and 635 mm Z-axis travel, supporting a table load up to 1588 kg. Equipped with a 20-station tool magazine, chip auger extractor, and a Renishaw OTS tool probe. Consider the opportunity to buy this HAAS VF-4 vertical machining center. Contact us for more information about this machine. Application Types Milling Giedpfxjx Enh To Albou

Condition: ready for operation (used), Year of construction: 2015, This 6-axis FANUC M-20iA robot arm was manufactured in 2015. It features a maximum payload of 20 kg and an impressive reach of 1,811 mm. The robot can be mounted in various configurations, including floor, ceiling (inverted), and angle mounting. If you are looking to get high-quality automation capabilities, consider the FANUC M-20iA robot arm we have for sale. Contact us for further details. • Max payload 20 kg • Max reach 1811 mm • Repeatability ±0.08 mm • Robot weight approx. 250 kg Gsdpfxsyyyfgo Albsiu • Mounting options floor ceiling inverted angle mounting • Controller R-30iB Mate • Robot types LR Mate 200iC 5H M-20iA LR Mate 200iD 7H • No laser scanners or safety light curtains included • Complete robot with controller included

Condition: used, Year of construction: 2012, functionality: fully functional, Fanuc M20iA robot, R30iA complete Year of manufacture: 8/2012 Controller: R30iA Number of axes: 6 Max. payload: 20 kg Max. working range: approx. 1811 mm Profibus Scope of delivery: Robot, controller, cables, teach pendant, operating manual, electrical diagrams Giodpfxsy Ni H Es Albou Additionally, spare parts are always available from stock. The robot is fully functional and can be inspected at any time. 2 weeks commissioning warranty. No further warranty.

Condition: like new (used), Through feed double end trimmer saws. Godpsif N Sxsfx Albsiu 2x 3kW saw motors. Feed motor with variator. 300mm to 3100mm end trimming capacity. Suitable for use with a moulder infeed or similar.

Condition: used, Year of construction: 2012, functionality: fully functional, Fanuc M710iC/20L Robot, complete with R30iA Year of manufacture: 6/2012 Controller: R30iA Number of axes: 6 Godsy Ni Hljpfx Albeiu Max. payload: 20 kg Max. working range: approx. 3110 mm Profibus Scope of delivery: robot, controller, cables, teach pendant, operating manual, circuit diagrams Additionally, spare parts are always available from stock. The robot is fully functional and can be inspected at any time. 2-week commissioning warranty. No further guarantee.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: R201204B9, overall weight: 252 kg, Equipment: safety light barrier, TECHNICAL DETAILS Control Control model: A05B-2611-B382 Control serial number: E20110087 Gripper Design: Vacuum gripper Drive: Single zone Gsdpfx Asy Hiy Tolbsiu MACHINE DETAILS Total weight: 252 kg Operating hours: approx. 1,000 h EQUIPMENT Safety enclosure with Allen Bradley PLC Sick laser scanners, 2 units Light barriers, 4 units

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. Gedef Ekn Dspfx Albjiu • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 6 m Linear Unit: ProfiStop Alpha Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand FANUC Gedpfx Alex D Nr Uebjiu Model i Pendant A05B-2255-C101#EGN This 6-axis FANUC Robot M20iA 35M was manufactured in 2017. It features a maximum payload capacity of 35KG and a reach of 1813 mm, ideal for tasks requiring precision and strength. Consider the opportunity to buy this FANUC Robot M20iA 35M robot arm. Contact us for more information. Application Types Robotics