Band Saw Horizontal Band Saw Semi Automatic

Fastech BMSY 320 DGH

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Giedpfx Asxddvnjh Hel Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Control Minipos 807 year 1992 Godpegf H Saefx Ah Hsil Cutting diameter round material max. 400mm Sägebandlänge:5500X32X1,1mm Feed automatic cut length min.20mm Chip conveyor Total power requirement 4 Kw Weight approx.2500kg Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Footprint : 2,8X2,8X2m

Condition: good (used), Year of construction: 2015, Machine is in good condition, parts shown by hand not come. X 1025 mm Y 560 mm Z 600 mm Heidenhain TNC 620, Gjdpfxewx N Nfe Ah Hoil 16.000 rpm HSK 63

Condition: new, Year of construction: 2023, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Gijdpfx Ahofww Sqs Hel Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, Smoke chamber Bastra for 1 trolley Electric heating 28 KW Gisdeh Hfc Sjpfx Ah Hol Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper; Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without after-burning system Installation dimensions of machine in cm : Width : 175 Lenght :120 Height : 210 Trolley dimensions in cm : 100*100*200 height Price for a generally refurbished machine: 14.000 EUR Delivery time: 30 working days after advanced payment

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: 3815407, WEIGHT 8000KG FEM ISO 1Am M4 KW 2.4/15.5 ( 50 Hz) Giedpst Nhqyefx Ah Hel MAXIMUM CAPACITY 16 TON

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t Giodpfefg E Hlsx Ah Hjl dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm Gjdpfsrz Tutox Ah Hjil - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm Giedpfx Aed Iipmoh Hjl 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Gedpfx Ahowtpfpo Hsil Rapid traverse: 15 m/min Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.